Fein SCT 6-25 Quick start guide

SERVICE
Tool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power Tools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
andequipmentnecessarytoper-formtheserepairs.Serviceorrepairsperformed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www.feinus.com and follow the link to “AuthorizedWarranty Repair Centers”
Phone: [phone] Fax: [phone] Toll Free: 1-800-441-9878
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
August22, 2006
SCT 6-25
Deck Screwdriver

FEIN Power Tools
SCT6-25 Parts List
Item Item Number Description Reqd
10 3-19-01-138-01-1 MOTOR HOUSING 1
20 3-07-01-234-00-2 SWITCH 1
21 4-30-13-052-03-3 SCREW 2
40 3-07-01-249-00-4 SWITCH REPAIR SET 1
60 3-07-12-089-02-3 BRUSH HOLDER 2
65 3-07-11-134-00-5 CARBON BRUSH 2
80 4-30-70-018-00-9 SCREW 2
90 5-1-274-004-11-7 FIELD WITH WINDING 1
100 4-30-70-014-00-0 SCREW 2
110 3-14-28-149-00-8 AIR CONDUCTING RING 1
120 3-24-31-041-00-5 CLAMPING PIECE 1
130 4-30-70-006-00-8 SCREW 1
160 3-07-19-565-01-6 CONNECTION CABLE 1
170 3-07-19-566-01-9 CONNECTION CABLE 1
190 3-12-01-123-00-3 HANDLE LOWER PART 1
200 3-12-01-124-00-1 HANDLE UPPER PART 1
210 3-28-05-191-00-2 SWITCH TRIGGER 1
220 4-30-66-009-03-8 SCREW 1
240 4-30-16-003-00-9 SCREW 2
250 4-30-70-007-00-2 SCREW 1
270 3-07-07-101-01-2 CABLE ASSEMBLY 1
280 3-14-13-224-00-9 PROTECTIVE SLEEVE 1
301 5-3-274-004-11-9 ARMATURE 1
310 3-26-12-084-00-1 PACKING RING 1
340 4-17-01-001-17-2 BALL BEARING 2
355 3-15-06-367-01-4 INTERM HOUSING 1
365 3-15-08-250-05-6 GEAR HOUSING 1
370 4-17-19-026-00-7 AXIAL DISC 1
380 4-17-15-029-00-9 NEEDLE BEARING 1
390 3-24-08-395-00-0 DISC 1
400 3-05-07-233-00-5 BUSH 1
410 3-36-57-173-00-3 SPUR WHEEL Z=34 1
420 3-26-24-094-03-2 WASHER 2
430 3-09-01-139-00-7 COMPRESSION SPRING 1
445 3-01-02-101-01-3 CAM RING 1
450 3-01-04-130-00-0 TOOL HOLDER 1
460 3-09-06-025-00-8 RETAINING RING 1
470 4-17-08-014-00-1 BALL 1
480 3-16-03-045-00-5 BUSHING 1
490 4-06-12-093-00-4 O RING 1
705 3-05-05-069-01-1 SLEEVE ASSEMBLY 1
710 4-17-08-019-00-4 BALL 2
720 4-06-12-071-00-9 PACKING RING 1
730 3-21-27-057-00-8 DEPTH STOP 1
960 4-30-72-010-00-9 SCREW 3
1000 3-02-40-257-00-1 BELT HOOK 1
1010 6-39-01-011-05-9 HANDBELT 1
1040 3-02-32-046-00-8 SNAP RING 1