FeiYu Tech VLOG pocket2 User manual

Instructions
EN V1.0
Foldable Smartphone Gimbal

Catalogue
1.Overview …………………………………………………………………………………………… 2
2.Accessories ………………………………………………………………………………………… 2
3.Start to Use ………………………………………………………………………………………… 3
3.1Unlock / Lock the clamp ………………………………………………………………………………… 3
3.2. Fold and unfold …………………………………………………………………………………………… 3
3.3 Charging …………………………………………………………………………………………………… 4
3.4 Smartphone installation ………………………………………………………………………………… 4
3.5 Power on / o󽗈 ……………………………………………………………………………………………… 4
3.6 Landscape Switching …………………………………………………………………………………… 5
4.Function Operation ……………………………………………………………………………… 5
4.1 Function / Modes Introduction ………………………………………………………………………… 5
4.2Button operation ………………………………………………………………………………………… 6
4.3Landscape and portrait shot switching ………………………………………………………………… 7
4.4 Light Indicator …………………………………………………………………………………………… 8
5.Gimbal Initialization ……………………………………………………………………………… 8
6.Connect and Use Feiyu ON App ………………………………………………………………… 9
6.1 Download the App ……………………………………………………………………………………… 9
6.2 Bluetooth Connection …………………………………………………………………………………… 9
6.3 Connect the App ………………………………………………………………………………………… 9
6.4 Shooting / control interface …………………………………………………………………………… 9
6.5 Firmware Upgrade ……………………………………………………………………………………… 10
7.Speci󽗉cations …………………………………………………………………………………… 10

VLOG pocket2 is a three-axis handheld gimbal suitable for mobile phones. It is small and foldable which can
be folded into a pocket. The gimbal supports landscape and portrait shooting, which can also control phone
shooting.
Suggestion
Vlog pocket2 includes below information, please read the information before using the gimbal.
1. Quick start guide
2. Online instruction
Tutorial
·The tutorial videos can be watched at FeiyuTech o󽗋cial website or scan the QR code on the right.
https://www.feiyu-tech.com/play/
· Watch tutorials in video skill page on Feiyu ON.
Download the Feiyu ON App
Please download Feiyu ON at your smartphone app store or can the QR code below.
* Requires iOS 9.0 or later, Android 6.0 or later.
iOS Version Android Version

2
1.Overview
5
3
4
1
7
2
10
5
6
8
9
17
15
16
18
19
20
21
6
12
13
14
11
1. Smartphone holder 7. Status indicator 13. Power button 19. Pan axis
2. Joystick 8. Video button 14. Type-C port 20. Trigger button
3. Focus button 9. Photo taking button 15.Cross arm 21. Handle (Built-in battery)
4. 1/4 inch thread hole 10. Function button 16.Roll axis
5. Tilt axis clamp 11. Tilt axis 17. Roll axis clamp
6. Pan axis clamp 12. Vertical arm 18. Folding knob
2.Accessories
Type-C Cable×1 Tripod×1 Portable bag×1

3
3.Start to Use
TIPS
(1) Unlock the three-axis clamp before powering on the gimbal.
(2) Please fully charge the battery before powering on the gimbal for the 󽗉rst time.
(3) Landscape to mount smartphone.
(4) If the power is too low, the red light will 󽗊ash three times every 󽗉ve seconds that
indicating you should charge it immediately.
(5) When not in use, power o󽗈 the gimbal.
3.1Unlock / Lock the clamp
Take the pan axis clamp for example.
Lock
Unlock
3.2. Fold and unfold
Unfold
(1) Loosen the folding knob and tighten the knob after unfolding the vertical arm.
(2) Unlock the three-axis clamp.
Fold
(1) Lock the three-axis clamp.
(2) Loosen the folding knob, and then tighten the knob after folding the vertical arm.

4
3.3 Charging
Connect the USB cable to charge. The indicator light is red when charging, and green when fully charged.
Charging Charge complete
3.4 Smartphone installation
*It is recommended to remove the smartphone case before installation
Pull the smartphone holder and put your smartphone in, keep the holder in the center of the smartphone. If the
phone tilts to left or right, please hold the roll arm ,slightly move the smarpthone to oppsite side until paralleling
to the ground.
3.5 Power on / o󽗈
*Unlock the three-axis clamp before powering on the gimbal.
*Power on the gimbal only after installed your smartphone securely.
Power on / o󽗈：Long press the power button and release it when you hear the tone.

5
3.6 Landscape Switching
Hold the gimbal normally and turn the handle left or right to invert. The inverted holding can be used for low
angle shooting. Double click the trigger button to recenter the gimbal.
4.Function Operation
4.1 Function / Modes Introduction
Pan Mode（Default mode）
The roll and tilt direction are 󽗉xed, and the smartphone moves according to the left-right movements of the user's
hand.
Lock Mode
The orientation of the camera is 󽗉xed.
Follow Mode
The roll direction is 󽗉xed, and the smartphone moves according to the left-right movements, up-down movements
of the user's hand.
Reset
Return to panning mode, three axises return to default position.
Manual Lock
Slide the tilt axis to one position for shooting.
Landscape and Portrait Shot
Assist landscape or portrait shooting.
Panning Mode Lock Mode Follow Mode

6
4.2Button operation
Power button
Long press: Power ON/OFF
Single tap: Enter/ quit shortcut menu ①（Need to connect Feiyu ON App）
Double tap: Switch between Photo/ Video（Need to connect Feiyu ON App）
Function button（M Key）
Single tap: Switch Power-on default mode/ M key shortcut mode ①
Double tap: Switch between landscape/ portrait mode
Triple tap: Enter standby mode/ wake up
Five tap: Initialize the gimbal (Single tap to wake up)
① Shortcut menu
Single tap power button to enter/quit shortcut menu, can choose video, photo, panorama, time-lapse modes，can set power-
on default mode, M key shortcut mode ( power-on default mode and M key shortcut mode cannot be set as the same mode ),
the factory setting of power-on default mode is follow mode, M key shortcut mode is pan mode, single tap function button to
switch between these two modes.
Pan Follow
Pan&Tilt Follow
All Follow
All Follow-R
Video
Photo
Panorama
Time-lapse photography
Power-on default mode
M key shortcut mode
Photo taking button
Single tap: Take photo（Bluetooth connectivity is needed）
Long press: Continuous shooting（Need to connect Feiyu ON App）

7
Video button
Single tap: Start/ stop recording（Bluetooth connectivity is needed）
Joystick
Control the rotation of the gimbal (in normal working state)
Setting options (when set on the App shortcut menu page)
Trigger button
Press and hold: Lock (Release it to quit)
Double tap: Reset
Triple tap: Switch front and rear camera（Need to connect Feiyu ON App）
Single tap 󽗉rst then press and hold: Fast follow mode (Release it to quit)
Focus button
Slide up and down to adjust focus
Slide to the T direction to zoom in (Far Focus)
Slide to the W direction to zoom out (Close Focus)
Button combination
Move the joystick downward+ double tap power button: clean Bluetooth pairing

8
4.3Landscape and portrait shot switching
Double click the function button or manually rotate the smartphone holder (according to the picture below) to
switch between landscape and portrait mode.
Kindly Reminder：
Do not make anti-clockwise rotation in landscape mode,Do not make clockwise rotation in portrait mode.
4.4 Light Indicator
Indicator Instruction
Blue light 󽗊ashes once Panning mode
Constant blue light Lock mode / Initialization
Blue light 󽗊ash two times Follow mode
Blue light 󽗊ashes three times All follow mode/Initialization succeed
Blue light keeps 󽗊ashing Malfunction/ initialization fail(Power o󽗈 with prompt sound)
Green light change to blue Power on
Red light turn o󽗈 Power o󽗈
Red light 󽗊ashes three times Low power
Red light keeps 󽗊ashing Gimbal powering o󽗈

9
5.Gimbal Initialization
You can initialize your gimbal when:
(1)When smartphone is not level
(2)If not used for a long period of time
(3)In case of extreme temperature variations
Steps
(1) Click the function button 󽗉ve times. The motors will stop working. Status indicator turns solid blue.
(2) Place the gimbal on a 󽗊at, horizontal surface. The gimbal will automatically reset after a few seconds detecting
no movement. The blue light will 󽗊ash three times to indicate end of the reset process.
(3) After the initialization is successful, click the function button to wake up.
*Note: if the initialization is not successful, click the function button to wake up. restart initialization process.
6.Connect and Use Feiyu ON App
6.1 Download the App
Path time-lapseZooming
Firmware
upgrade
Photo/Video Timer
photography
Overlapping
images
Landscape and
portrait switching
Video editing
Beauty
Light tracking
photography
Face lockingObject tracking Ultra-wide angle
panorama
......
Slow motion Filter
Feiyu ON
Please download Feiyu ON at your smartphone app store or scan the QR code below.
* Requires iOS 9.0 or later, Android 6.0 or later.
iOS Version Android Version

10
6.2 Bluetooth Connection
Turn on the gimbal.
Method one: Download and install Feiyu ON App, run the App, follow the prompts to turn on and connect with the
bluetooth.
Method two: Turn on the smartphone bluetooth, Connect the gimbal bluetooth in the setting of phone, e.g. FY_
PocketV2_XX. (If the bluetooth can't be found, please turn o󽗈 Feiyu ON App in the background.)
6.3 Connect the App
Open Feiyu ON App and connect the gimbal via tips.
Format Bluetooth of gimbal: FY_PocketV2_XX
6.4 Shooting / control interface
Panning modeLock mode
Control interface
Remote Control
FY_PocketV_xx
Virtual
Joystick
Reset
Tutorial
Upgrade
Choose photo
modes Shutter
Camera setting
Switch between
front and rear camera
Back
Shooting interface
Album
Switch between
photo/ recording
mode
Gimbal information
Face/object
tracking Setting- Advanced
settings
6.5 Firmware Upgrade
Upgrade the 󽗉rmware through the App.
(1) Click the icon
(2) Select upgrade type.
(3) Follow the prompts to upgrade the 󽗉rmware.
Upgrade type introductions:
Keyboard 󽗉rmware update: Repair / update or newly add button/touch screen/interaction functions, update more
compatibility cameras which can be controlled through WIFI, repair few bugs about camera control through WIFI,
and etc.
Bluetooth firmware update: Repair / update or newly add Bluetooth functions, update more compatibility
cameras, and etc.

7.Speci󽗉cations
Tilt Range 165°
Roll Range 323°
Pan Range 330°
Standby Time 9Hours
Weight 272g
Payload 250g (After Balanced)
Adapter smartphones iPhone and Android phones ( The width of the phone is between 41~89mm )

Disclaimer
Thanks for using FeiyuTech product. The information in this document a󽗈ects your safety and your legal rights and
responsibilities. Read the entire document carefully to ensure proper con󽗉guration before use, Failure to read and
follow instructions and warnings in this document may result in serious injury to yourself or others, or damage to
your products or damage to other objects in the vicinity.
By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you
understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for
your own conduct while using this product, and for any consequences thereof. You agree to use this product only
for purposes that are proper and in accordance with all applicable laws, rules, and regulations, and all terms,
precautions, practices, policies and guideline FeiyuTech has made and may make available. FeiyuTech accepts no
liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of product.
FeiyuTech will not provide any service for any product obtained from abnormal channels.
Notice
1.Make sure motor spinning is not blocked by external force when the product is power on.
2.The product DO NOT contact water or other liquid if the product is not mark waterproof or splash-proof.
Waterproof and splash-proof product DO NOT contact sea water or other corrosive liquid.
3.DO NOT disassembly the product except marked detachable. It need send to FeiyuTech after-sales or authorized
service center to 󽗉x it if you accidently disassembly and cause abnormal work. The relevant costs are borne by
user.
4.Prolonged continuous operation may cause the product surface temperature to rise, please operate carefully.
5.DO NOT drop or strike the product. If the product is abnormal, contact FeiyuTech after-sales support.
Storage and Maintenance
1.Keep the product out of the reach of children and pets.
2.DO NOT leave the product near heat sources such as a furnace or heater. DO NOT leave the product inside of a
vehicle on hot days.
3.Please storage the product in dry environment.
4.DO NOT overcharge or overuse the battery, otherwise it will cause damage to the battery core.
5.Never use the product when the temperature is too high or too low.
O󽗋cial Social Media
Facebook: www.facebook.com/feiyutech
YouTube Channel: www.youtube.com/c/Feiyu-tech
Twitter: www.twitter.com/feiyutech
Instagram: www.instagram.com/FeiyuTech
YouTube Channel: www.youtube.com/c/Feiyu-tech
Online Store: store.feiyu-tech.com
Website Facebook Youtube Twitter Instagram

Guilin Feiyu Technology Incorporated Company
E-mail: [e-mail] Tel: [phone]
www.feiyu-tech.com