Fermax FVI-6010-V2 User manual

-1-
USER MANUAL
FVI-6013MEM FVI-6015P2
FVI-6010-V2
2 WIRE SYSTEM
VIDEO DOOR PHONE SYSTEM
• Please read this manual carefully before using the product you purchase,and keep it well for future
use.
• Please note that images and sketch maps in this manual may be different from the actual product.
RF CARD

-2-
CONTENTS
Front panel............................................................................................................................ 4
Terminal Description ............................................................................................................ 5
Mounting ............................................................................................................................... 7
Quick Guide .......................................................................................................................... 8
Screen................................................................................................................................... 11
Answering a call .................................................................................................................. 12
Pan-tilt & Zoom.................................................................................................................... 14
Adjusting screen&volume .................................................................................................. 15
Door release......................................................................................................................... 16
Calling other monitors ........................................................................................................ 16
Monitoring............................................................................................................................ 17
Recording............................................................................................................................. 18
Viewing images/videos ....................................................................................................... 19
Formating an SD card ......................................................................................................... 20
Copying recordings to SD card.......................................................................................... 20
Leaving messages............................................................................................................... 21
Viewing visitor messages................................................................................................... 21
Mute function....................................................................................................................... 22
Viewing calling records ...................................................................................................... 23
Message function ................................................................................................................ 24
Openning staircase light..................................................................................................... 25
Motion detect function ....................................................................................................... 26
Setting date and time .......................................................................................................... 27
Setting ring tone.................................................................................................................. 28
Setting ring volume............................................................................................................. 28
Enabling/Disabling the operation sound........................................................................... 29
Naming door station & camera .......................................................................................... 29
Setting monitor time............................................................................................................ 30
Enabling/Disabling motion detect function ..................................................................... 30
Enabling/Disabling intercom function .............................................................................. 31
Changing the display language ......................................................................................... 31
Restoring to default setting................................................................................................ 32
Entering installer setup....................................................................................................... 32
Connecting Basic One-to-one............................................................................................ 36
Connecting Multi Door Stations......................................................................................... 36
Connecting Multi Monitors ................................................................................................. 37

-3-
Functions Setting Up .......................................................................................................... 39
Setting Door Station Address ............................................................................................ 40
Setting Unlock Mode........................................................................................................... 41
Setting Unlock Time............................................................................................................ 41
Setting Nameplate Illumination Mode................................................................................ 42
Setting Night View LED Illumination Mode ....................................................................... 42
Setting Ring-back Tone....................................................................................................... 43
Registering ID Card ............................................................................................................ 43
Connecting Electric Lock ................................................................................................... 46
Cables and Requirments .................................................................................................... 47
Specication ........................................................................................................................ 49

-4-
Front panel
Key functions
[1]
[6]
[2]
[3]
[4]
[5]
[7]
[8]
[9]
NO. Item Description
[1] Digital LCD touch screen •See the next page for details
•Display the visitors' image
[2] Talk/Mon button •Press to communicate hands free with visitor
•Press to view the outdoor condition in standby mode
[3] Menu button Press to open main menu in shortcut
[4] Unlock button Press to release the door
[5] Microphone Transmit audio from one station to other stations
[6] SD card slot Use to insert micro-SD card
[7] Mounting hook Use to hang up the monitor
[8] Connection port Bus terminal
[9] Speaker Send out sounds of ring tones,audios and alarms
L1
L2
SD card
1 2 3
ON DIP
4 5 6

-5-
[11]
[10]
[12]
[13]
[9]
[1]
[3]
[4]
[8]
[7]
[6]
[5]
[2]
[1] Microphone
[2] UNLOCK indicator
[3] CALL indicator
[4] Call button
[5] Nameplate
[6] Front panel
[7] Speaker
[8] Night view LED
[9] Camera lens
[10] Rainy cover
[11] Mounting hook
[12] Connection port
[13] Screw hole
Terminal Description
1 2 3 4 5 6
ON DIP
L2
L1
DIP Switches
SW+
SW-
RING
GND
NC
L1
L2
1 2 3
ON DIP
4 5 6
L1,L2: Bus line terminal.
SW+,SW-: Extra door bell call but-
ton connection port.
Ring,GND: Extra buzzer connection
port.
NC: Undened.
DIP switches: Total 6 bits can be
congured.
• Bit1~Bit5: User Code setting.
• Bit6: Set to ON if the monitor is at
the end of the line or works with
DBC4A. Otherwise, set to OFF.

-6-
Lock Control Jumper: To select the lock type.
Motion Detector Connect Port: To connect external PIR motion detector.
Main Connect Port: To connect the bus line and the electronic locks.
• L1,L2: Connect to the bus line, no polarity.
• PL: External lock power input, connect to the power positive(power +).
• S+: Lock power(+) output.
• S-: Lock power(-) output, connect to the power(-) input of locks(only when using the door
station to power the locks, if using the external power supply for the locks, the S- will not be
connected).
1 2 3
Lock Control Jumper
PIR Motion Detector
Connect Port
+12V
GND
PIR
L1 L2
PL
S+ S-
Main Connect Port

-7-
The installation height is suggested to 145~160cm.
1. Use screws to fasten the mounting bracket to the wall with mounting box.
2. Connect the 2 wire cables to the unit.
3. Mount the unit to the mounting bracket, make sure the unit is absolutely attached to the
mounting bracket.
Mounting
Mounting screw
x 2(included)
The unit
Mounting box
(size:86x86mm)
Mounting bracket
2 wire cable
145~160 cm
1 2 3 4 5
AcDbMLeader (ACDB_MLEADER_CLASS)
AcDbMLeader (ACDB_MLEADER_CLASS)
Rainy cover
Rainy cover
The distance between
the top of main unit
and rain cover should
be not less than 3mm.
Main unit
Main unit
≥3mm
1. Connect the cable correctly.
2. Drill holes in the wall to match the size of screw stoppers,then attach the rainy cover and
main unit to the wall, and the distance between the top of main unit and rain cover should be not
less than 3mm..
3. Install the name plate.
4. Attach the front panel to the main unit.
5.Usethespecialscrewdriverandthescrewstoxthepanel.

-8-
Quick Guide
Turn on monitor, press the Fermvision logo
located at the bottom left of the screen (Figure
1), and then hold down the key button (right
hand side of the main button) (Figure 2) until
a new menu comes up, which is shown on
Figure 3.
Use Table below for Dip switch Addressing.
Master – Addressed as 0
For slave monitor 1 Addressed as 1.
For slave monitor 2 Addressed as 2.
1. Accessing to programming menu – Monitors
2. Programming Monitor address (When using more than one monitor):
Figure 1
Figure 2
Figure 3
About
Local Address 00.00
Video Standard AUTO
System Verson 00.01.00
Display Driver 1.0
Font 1.0
UI 1.0
INSTALLER SETUP 123
_
? + OK: Help Menu
@ + OK: Address Setting Menu

-9-
2. Programming Monitor address (When using more than one monitor):
Access to programming menu (see above) and then input code 84XX (where XX goes from 01 to
99 seconds),
nallypressOKtoconrm.
E.G:
For a door opening time of 8 seconds: input code 8408 and press the button OK
Access to programming menu (Figure 3) and input one of the following codes followed by OK
button.
Turn the Green Light off - 8057
Turn the Green Light on - 8052
3. Unlock Time
4. Monitor button light:
ON(1)
=
OFF(0)
=
ON
ON
ON DIP
123456
Bit state Setting Bit state Setting
1 2 3 4 5
6
ON DIP
1 2 3 4 5
6
ON DIP
When monitor is not
at the end of bus line.
When monitor is at
the end of bus line.
Bit-6 switch setting

-10-
Door lock controlled with internal power
Power on to unlock. (12V output, up to 250mA).
EB: Exit button (Door lock control is not timed by the exit
button)
Door lock controlled with dry contact
The inside relay contact is restricted to AC or DC 24V/3A.
The jumper must be taken off before connecting
Note: It is advisable to always use a separate power supply
for the electric latch, as well as placing a varistor at both
terminals of the electric latch.
EB: Exit button (Door lock control is not timed by
the exit button)
See Figure 1, press KEY_SET button, then
press KEY_ X once (where X goes from 1-4),
wait 10 seconds or press KEY_SET button
four times to save the settings.
E.G.:
For door station 1: KEY-SET, KEY_1, press
KEY_SET four times.
For door station 2: KEY-SET, KEY_2, press
KEY_SET four times.
Figure 1
6. Electric Lock Connection
5. Programming Door Station address (When using more than one door
station)
KEY_1
KEY_2
KEY_3
KEY_4
KEY_SET
LED_UNLOCK
LED_TALK
LED_NAME
RF CARD
LOCK
Take off the Jumper
POWER
SUPPLY
BUS PL S+S-
VARISTOR
EB
*
LOCK
BUS PL S+S-
Jumper position in 2-3
1 2 3
VARISTOR

-11-
Screen
The Main menu is your starting point for using all the applications on your monitor. You can cus-
tomize your Main menu to display your logo.
Touch anywhere of the screen on monitor in standby mode, the Main menu will appear as follow:
CLOSE
Touch it to turn off the screen
and make the monitor in standby
mode.
SETTINGS
Touch it to enter
setup page.
Displays which door station
is calling.
Shows status of talking,unlocking
ect.
Displays talking time.
5 direction pad button,
zoom&pantilt the picture.
LIGHT
Touch it to light up the
staircase light via RLC.
MOTION DETECT
Touch it to enter motion
detect options.
MONITOR
Touch it to view outdoor condition.
MESSAGE
Touch it to write messages or
review the received/sent out
messages.
MEDIA
Touch it to play recorded images
or videos from door stations.
Review messages left by visitor.
See infos of memory/SD.
CALL RECORD
Touch it to see calling in/calling
out records or missed calls .
CALL SCENARIO
Touch it to activate the functions
of Mute,Left message and Divert
call.
INTERCOM
Touch it to enter
intercom selections.
Current date and time
Status bar
LOGO
Touch it to view Device
infos.The logo can be
customized.
Main Menu
While talking with a door station
00:10 DS-1
REC
Note: The 5 direction pad operation should make effective with sh-eye door station.
Blinks while recording.

-12-
Answering a call
• When there is a call from a video door station.The call tone sounds, an image will be dis-
played on the screen.
• Touch icon on screen or press TALK/MON button on the panel, begin communicat-
ing hands free with the visitor for 90 seconds.
• While communicating with the visitor, unlock the door, capture images/videos and adjust
screen&volume are available. More details,please refer to the following descriptions.
Note: 1.If nobody answers the phone, the screen will be turned off automatically after 40 seconds.
2.The 5 direction pad operation should make effective with sh-eye door station.
It’s available to select cameras to monitor while being called.
Max.16 cameras can be selected to monitor, 4 cameras is default.
Follow the steps:
Monitoring cameras while being called/talking
00:10 DS-1 00:10 DS-1
Normal
Monitor Select
CM-1
CM-2
CM-3
CM-4

-13-
• Touch icon on screen or TALK/MON button on the panel to complete the communi-
cation.
To complete communication
Note: Communication also ends automatically after 90 seconds.
1.Receiving a call while talking with a door station
2.Receiving a call while talking with other monitors
• Other door stations calling is forbidden
• Conclude current talking to answer the new call-in
• The talking will stop immediately, call tone sounds in normal.
• The video image from the door station is displayed on the screen, talking,unlock,capture
images/videos, adjust screen&volume are available.
It’s available to adjust image scale while being called. Total 3 image modes can be selected.
Follow the steps:
Compare the difference of these 3 image modes:
Adjusting image scale while being called/talking
00:10 DS-1 00:10 DS-1
Normal
00:10 DS-1

-14-
Pan-tilt & Zoom
It is available to adjust the display mode for viewing images at a sh-eye door station by using
the 5 direction pad button.
Here are some examples:
• Touch icon to zoom the center position.
Note:
1.The zoom&pantilt function should make effective
withsheyedoorstation.
2.The edge of pantilt image will not be displayed.
When an image at a door station is
displayed,move to the desired position
by touching on the
screen to view the image in zoom mode.
• Touch icon to zoom the right position.

-15-
Adjusting the speaker volume
Adjusting images
Adjusting screen&volume
While receiving a call from door station, or monitoring /communicating with the visitor,you can
adjust the screen and speaker volume. Follow the steps:
Total 4 scene modes can be selected in sequence:Normal, Brightly, Soft and User.Whichever
mode you choose, there will be a corresponding value for contrast,brightness and color.
Youshouldknowthatthe contrast,brightnessandcolorcanbemodiedfreely,butthisaction
should be at the User scene mode.
Volume can be adjusted at any time.
Adjusting range: 0 (mute), 1 - 9.
Adjust the contrast of the screen,the range is 0~9. Touch -or +to change the level.
Adjust the brightness of the screen ,the range is 0~9. Touch -or +to change the level.
Adjust the color of the screen,the range is 0~9. Touch -or +to change the level.
Touch -or +to reach desired level.
00:10 DS-1 00:10 DS-1
Normal Brightly Soft User
Note: The adjustments have no effect on the recorded images.

-16-
Calling monitors in the same room
Door release
Calling other monitors
It is available to release the door during a call-in, communication,or while monitoring a door
station.
It is available to call between monitors in the same room or in the same system,or call the
Guard Monitor.Follow the steps to activate the functions:
1. Touch [Inner Broadcast] icon on one of monitor, all other monitors in the same room can
automatically receive messages without answering the call. Note that all other monitors will not
open the screens.
2.Touch [Inner Call] icon on one of monitor, all other monitors in the same room will ring at the
same time,whichever monitor answers the call, conversation is started, other monitors will stop
ringing at once.(Calling ends automatically after 30 seconds if nobody answers the call)
00:10 DS-1
1
Touch either or icon on the
screen or press UNLOCK button on
the the panel to release door. The door lock
is released for the set door release time.
(if two locks are connected to door station,
touch icon to release the second lock.)
00:10 DS-1
* Use " " or " " to adjust the microphone volume.
* Touch icon to end the calling.

-17-
Calling other monitors in the same system
Calling the guard monitor
Touch [Name list Call] icon on monitor, the users in the same system will be displayed.
Just select one target, touch icon to call the corresponding user. If the call is
answered,conversation is activated.
A Monitor can be assigned as Guard Unit Monitor; when the Guard Unit Monitor answers the
call, conversation with the guard person is started..
You can monitor the entrance at any time via the monitor.
1.Touch anywhere of the screen on monitor in standby mode.
2.Touch [MONITOR] icon on main menu page to enter Monitor select page.
*Note: Press TALK/MON button on the panel in standby mode to monitor the master door station in shortcut.
Monitoring door stations/cameras:
• DS1~4 and CAM1~4 can be selected to monitor individually if the system install multi door
stations/cameras.See the following steps:
[ 01 ] Jim. Zhang
[ 02 ] Calo. Liu
[ 03 ] Jacko. Zhang
[ 04 ] Philips. Chen
[ 05 ] Hebe. Zhang
[ 06 ] Tony. Li
Name List
Note:
* Use " <" or " > " to scroll pages.
* Touch " " to rename.
* Touch " " to redial when the icon is on
the screen.
* Calling ends automatically after 30 seconds if
nobody answers the call.
Monitoring
00:10 DS-1
Monitor Select
DS-1
DS-2
DS-3
CAM-1
DS-4
CAM-2
00:10 DS-1
* During monitoring, images can be viewed, but audio cannot be heard.
* If there is a visitor at the entrance, touch icon on screen to begin communication with
door station.

-18-
Recording
3.To end monitoring
Touch icon on the screen or press TALK/MON button on the panel.
* Monitoring also ends automatically after 30 seconds.
Video Quad Monitoring:
If the system installs multi cameras via QSW. Video quad monitoring is available.
• On Monitor select page, touch “ > “ icon to scroll next page.
• Select “QUAD-1” item to activate video quad monitoring, see the following steps:
Available functions during monitoring(not including video quad monitoring)
•Pantilt&zoom
•Adjustingimages(imagescale/bright/color/contrast)
•Doorrelease
•Volumecontrol
•Manualrecording
Videos and images are possible to be recorded, both automatic recording and manual record-
ing are available.
00:10 DS-1
REC
Blinks
Automatic recording
• Recording starts after 3 seconds while
receiving a call.
• While recording, “ REC” blinks on the
screen.
• Capture one picture automatically for
each calling.
00:10 DS-1
Monitor Select
CAM-3
CAM-3
CAM-4
CAM-4
CAM-1 CAM-2
QUAD-1
Monitor Select
DS-1
DS-2
DS-3
CAM-1
DS-4
CAM-2
* During monitoring, manual recording is available.
* Touch each one of video to switch to monitor the corresponding camera Independently.

-19-
Video:008/020 2015/06/23 14:36:55
00:03 00:09
Therecordedimagesarestoredinthebuilt-inmemoryrst.
* Max.118 pictures can be stored in inner memory
* If a micro-SD card is installed, images can be copied to SD card.
* Max. 32G Micro SD card is supported.
Note:
* Automatic recording function cannot be cancelled.
* Automatic recording is not available while monitoring a door station. To save images while monitoring, see manual
recording below.
Manual recording
While being called,Touch icon when an image is displayed.
Note:
* Manual recording is available at any time when icon is on the screen.
* Manual recording is allowed in pantilt & zoom mode.
* Manual recording cannot be performed during automatic recording.
Viewing images/videos
The recorded images/videos can be playback on monitor. Follow the steps:
• On main menu page, touch [Media]->[Graphics Playback] icon, most recent recordings are
displayed (If insert a micro SD card,playback videos.Otherwise,playback images).
• Touch " <" or " > " to scroll through recordings, touch “ ” to delete current image/
video(Please note that if the recordings are videos, touch " " icon to start/pause the videos).
* If the monitor installed a micro SD card, the recording format is video, and recording time limited is 10s. The
videos will be saved on micro SD card directly. Otherwise,the recording format is image.
* A brand new SD card needs to be formatted by the monitor, then it can be used for video & audio recording.
To stop
Touch icon on the screen during play.

-20-
When copying is completed, "BKUP_PIC" folder is created on the Micro SD card. Copied im-
agesarestoredwiththefollowinglenames:
Recording Date
Recording Time
Micro-SDcardsneedtobeformattedwhenusingtheminthismonitorforthersttime.
* When formatting an micro-SD card, all existing data on card is erased.
* To EXPORT RECORDED IMAGES, refer to following item on this page.
* To VIEW SD CARD INFO, on main menu page, touch Multimedia->Memo information.
Note:
* This action will overwrite all existing images in the "BKUP_PIC" folder on the micro SD card.
* If the number of images or folders exceed the limit of micro SD card, they cannot be copied.
* The images on the micro SD card cannot be copied into the built-in memory.
* If copied is fail, try to format the SD card on the monitor.
20151119_115125.jpg
Copying recordings to SD card
Formating an SD card
You can copy recordings(videos/images) stored in the built-in memory to a SD card.
• On main menu page, touch [Media]->[Copy to SD], the information of "Copy Pictures To
SD?" will be asked.
• Touch icon to copy. Touch icon to cancel.
* When a sound beep beep is sent out and a blue screen is displayed, formatting is complete.
* It may take some time until formatting has been complete.
1.On main menu page,touch Multimedia->Format SD Card. A notice message is displayed.
2. Touch icon to continue with formatting. Touch icon to cancel formatting.