Fermax DUOX PLUS VEO XS User manual

USER’S QUICK GUIDE: DUOX PLUS VEO XS MONITOR
USER’S QUICK GUIDE: DUOX PLUS VEO XS MONITOR
Cod. 970142Id V05_23
XS
CONTROL BUTTONS / LEDS
Digital menu for internal parameter settings and configuration.
(When the monitor has already been programmed)
In conversation, press to open the door.
In standby, call to guard unit (if applicable).
Auxiliary function, (contact your installer).
In standby, press and it displays the option of auto-starting with
different panels. By sequentially pressing Panel 0, Panel 1,
General Panel, (depending on the available panels).
Audio activation and hang-up (hands-free functions).
VEO XS monitor incorporates an OSD menu that is
managed via the monitor´s push buttons. The icons
displayed are managed with the corresponding buttons
located on the monitor.
Ring tone volume setting.
• On standby: Melody volume.
• Conversation in progress: Upstream audio setting.
The white line at the bottom of the icon indicates the function that is currently in effect.
Select with / the desired icon and confirm with .
F2
99
LEDs
Induction loop label. Situated on the side of the monitor. (Depending on model).
Green Led: Depending on configuration, (check with your installer).
Not
programmed
Standby Call
Called
Handsfree
audio
Operation
LEDs
Output Audio
simplex mode
Input Audio
simplex mode
Do not
Disturb
Red
Blue
USER MENU
F2
99
1 2
45
31Monitor volume settings
2Do Not Disturb function
3Display images
4F2 Function
5User parameter settings
1
Switched on
Slow blinking
Fast blinking
LEDs
To perform a quick reboot of the terminal, press and hold the menu button for 10s.

USER’S QUICK GUIDE: DUOX PLUS VEO XS MONITOR
1Melody selection:
:Panel melody selection: It can be changed the melody that you hear on the monitor when a
call is made from outdoors. Ringtones 2 and 5 repeat the tone 4 times.
: Selection of the melody for the doorbell : Panel melody selection: The melody that will ring
upon doorbell activation, if it has been connected to monitor, can be changed.
: Concierge melody selection: It can be changed the melody that you hear on the monitor when
the concierge calls that monitor.
1Monitor volume settings. Upon a call or doorbell activation.
2Do Not Disturb function:
: The call is not heard.
: The call is heard, (by default normal operation is selected).
399 Display images:
To display the varios photos taken with the date, time and the photo number.
When a call is made from the outdoor panel, a photo is automatically taken 5 seconds later and stored
in the memory. T he image capture function must be pre-selected , see screen «USER PARAMETER
SETTINGS», (option 3).
F2
99
Within the USER MENU, selecting the option «USER PARAMETER
SETTINGS» will acces a new screen corresponding to the various
configuration parameters.
Select with the icon and confirm with .
: To clear images.
: To cancel and go to the previous screen.
4F2 F2 Function (extra function, check with your installer).
5User parameter settings
31/01/2019 12:37 130/149
: To select/view the photos stored.
1 2
45
3
6
1Melody selection
2Date and time settings
3Enable/Disable image capture
4User Reset
5User help
6Enable/Disable Doormatic
USER PARAMETER SETTINGS
2

USER’S QUICK GUIDE: DUOX PLUS VEO XS MONITOR
2Date and time settings
With select the icon
and confirm with .
With select the
date format. Once selected
confirm with .
Select the date and hour
with and confirm
To browse the settings .
Date not set: 31/01/2019 (default). The icon
_ _ : _ _
appears indicating that the date is not correct (default
date). Upon losing power, it returns to the default date.
Note: If an image is captured with the date not yet set, the following icon appears .
Notication icons for a date not set:
_ _ : _ _ 31/01/2019 00:00 130 / 149
_ _ : _ _
3
3Enable / Disable image capture
The monitor can take an automatic picture within 5 seconds of receiving a call from an outdoor
panel.
: The image capture function not selected, (by default).
: The image capture function selected.
1
With select the icon
and confirm with .
3
2
Press to activate/
deactivate the function.
Notice: According to the European Union legislation about data protection ((EU) 2016/679), the capture of images
may be restricted. This feature is deactivated by default in all monitors, although can be activated at your own
responsibility. Furthermore, the legislation may force to place a sign next to door stations, indicating that monitors
can capture images. You can download it at https://www.fermax.com/intl/en/corporate/utilities.html.
_ _ : _ _
Communication screen
31/01/2019 00:00 130 / 149
Image viewer screen
F2
_ _ : _ _
99
User Menu Screen
Image Viewer
2
31/01/2019
01/31/2019
2019/01/31
3
07/09/2019 13:55
1

USER’S QUICK GUIDE: DUOX PLUS VEO XS MONITOR
AUDIO SETTINGS
While the audio channel is open, (established communication), press the button and a
menu screen appears for this setting.
Increase or decrease with
and , until obtaining the
desired regulation.
Notice: The adjustment
potentiometer can be used
as well.
4User Reset: Reset the user’s configuration parameters.
5Enable / Disable Doormatic
Option that allows automatic door opening when a call is made.
T he function must be pre-selected , check with your installer, (depending on configuration).
: Doormatic function not selected, (by default).
: Doormatic function selected.
Notice: Maximum conversation time: 90 seconds.
4
SETTINGS
1. MONITOR SETTINGS
With an image on the monitor, by pressing the button , or upon receiving a call without
establish communication, press the key to show the video settings.
VIDEO SETTINGS
Select the settings option and increase or decrease with and .
42 3
1
23
1
MANUAL FULL MONITOR
For more information, visit www.fermax.com
Contact: [email protected] / www.fermax.com/contact
The device you have purchased is identied
under Directive 2012/19/EU on waste electrical
and electronic equipment. More info: