FIBARO FGBHDW-002 User manual

DOOR / WINDOW
SENSOR
CONTACT & TEMPERATURE SENSOR
Quick Start Guide

2
If you need help configuring the FIBARO Door/Window Sensor,
follow our guides and technical manuals available at:
manuals.fibaro.com/en/hk-door-window-sensor
Support
Scan the code to
read the manual

3
Package Contents
Quick Start Guide,
Quick Manuals,
Warranty Terms
Magnet
DeviceMounting parts
Magnet sticker
Every Door/Window Sensor has a unique HomeKit Setup Code.
You will find the setup code on back cover of the Quick Start Guide.
Device sticker

4
FIBARO app
homekit.fibaro.com/app
Download the FIBARO for HomeKit application from the App Store.

5
First launch
Take the cover off
Step 1
Remove the battery
blocker and check if the
battery is placed correctly
Step 2
Close the cover
Step 3
Fig. 1
Fig. 3 Fig. 4
Fig. 2
pull up

6
Step 4
First launch
Open the FIBARO app
and tap Add accessory icon
Step 5
Application will guide you
through the pairing process
Fig. 5
If you have already set up
another accessory tap the + icon
!

7
First launch
Stick the sensor onto the frame and
magnet onto the moving part of the
door/window (no further than 5 mm
from the sensor)
Step 8
* you can also install device with screws
(not included)
Fig. 6
Fig.8
Carefully remove one protective
layer from the double-sided stickers
included in the package. Apply the
stickers to the sensor and magnet.
Step 6
Peel off protective layer from the
sensor and magnet
Step 7
Fig. 7

8
Resetting the Door/Window Sensor to factory defaults:
1. Open the cover
2. Press the button 3 times then press and hold the button
3. When the LED glows, release the button
4. Click the button again to confirm
Button
Fig. 9

© Fibar Group S.A.
All rights reserved
Made in Poland
www.fibaro.com
Room: ..........................................
105494610101
Write down the location of the device.
HomeKit Setup Code is needed to securely add accessory
to your home. You may need it in case of re-pairing.
Remember to keep it in safe place. Nobody but you has a copy.
FIBARO cannot recover the HomeKit setup code for you.