Firich Enterprise XP-3125W User manual

XP-3125W XPOS User Manual
XP-3125W
XPOS
U Us se er r M Ma an nu ua al l
ver. 0.1

Copyright otice
This document is copyrighted, © 2018. All rights are reserved. No part of this
document may be reproduced, copied, translated, or transmitted in any form or by
any means ithout the prior ritten permission from Firich Enterprise Co., Ltd.
Information provided in this manual is intended to be accurate and reliable.
Ho ever, Firich Enterprise Co., Ltd. assumes no responsibility for its use, nor for
any infringements upon the rights of third parties, hich may result from its use.
The material in this document is for product information only and is subject
to change ithout notice. While reasonable efforts have been made in the
preparation of this document to assure its accuracy, Firich Enterprise Co., Ltd.,
assumes no liabilities resulting from errors or omissions in this document, or from
the use of the information contained herein.
Revision Record
Date Version Description ote
2019.11.29 0.1 PM Initial Sabrina

Safety Precaution
Please observe the following precautions to ensure safe use of equipment.
1. Disconnect the equipment from AC outlet before cleaning.
Use only moist cloth ( ith ater). Do not use detergent.
2. Po er outlet must be easily accessible and near the equipment.
3. Keep the equipment a ay from humid and dusty environment.
4. Place the equipment on a stable surface during installation and operation.
5. Do not place any load on the po er cord.
6. All cautions and arnings on the equipment should be noted.
7. When the equipment is not in use, disconnect it from the po er source to avoid damage by
transient over-voltage.
8. Liquid into the equipment may cause fire or electrical shock.
9. Only qualified service personnel should be allo ed to open the equipment.
10. If any of the follo ing situations arises, ask service personnel to check the equipment:
A. Po er cord / plug is damaged
B. Liquid penetrates into the equipment
C. The equipment does not function properly and/or cannot ork according to the User Manual
D. The equipment has been dropped
E. The equipment sho s signs of damage
11. Temperature belo -20° C (-4°F) or above 60° C (140° F) may damage the equipment

1. PRODUCT OVERVIEW ...................................................................................................................................... 4
XP-3125W (XPOS) Feature ...................................................................................................................................... 4
OverviewDimension ................................................................................................................................................ 5
Ad usting XP-3125W angle ..................................................................................................................................... 7
I/O Connectivity ...................................................................................................................................................... 8
Packing List ............................................................................................................................................................. 8
2. HARDWARE I STALLATIO A D UPGRADE ..................................................................................................... 9
Install 2x20 (2x24) customer display ....................................................................................................................... 9
Install Add-on Device ............................................................................................................................................ 10
3. SOFTWARE CO FIGURATIO ..............................................................................................................................11
IO Port Power Setting ............................................................................................................................................ 11

1
1. . P Pr ro od du uc ct t O Ov ve er rv vi ie ew w
XP-3125W (XPOS) Feature
XPOS XP-3125W is a 15.6 inch all in one android point of sales system po ered by Rockchip
Quad-core Cortex-A17 up to 1.6 GHz processor. By utilizing slim key components and enclosing
them in an aluminum die-casting chassis, XP-3125W is able to achieve both a slim and strong
design. The structure is use system on module ith IO interface is installed inside the stand base.
The dual hinge stand provides the user the ability to adjust the stand and display angles
making it optimal for all environments.
On the bottom of the display is a standard 2in1 sensor. The proximity sensor can detect a
presence infront of the sensor and ake the system up from sleep state allo ing users to save on
po er consumption hen the store traffic is lo .
Key Features
•Slim & Sleek
•2 in 1 Sensor: Ambient Light Sensor & Proximity Sensor
•Dual Hinge Stand: High Profile and Lo Profile
•FEC o ned Ora (edge service)

Overview
15.6” 15.6” TFT-LCD
1920 x 1080 400nits (LED)
PCAP
Optiona
Side Periphera
1. MSR
2. RFID
3. Fingerprint
Optiona
XP-2025G
2 x 20 or 2 x 24
Customer Disp ay
Optiona
2MP Camera Proximity & Ambient
Light Sensor
Power Switch
SOM + IO connectivity base

Dimension
15.6 inch
A Display Height (mm) 235.7
B Display Width (mm) 368.0
15.6 inch
A Panel PC Thickness (mm) 24
B System Height (mm) 293
C Base Depth (mm) 231.71

Adjusting XP-3125W angle

I/O Connectivity
I/O
IMPORTANT: To avoid damage to the computer, DO NOT plug a telephone cable into the cash
dra er jack.
Packing List
I/O Port Connector Type Description
20v DC- in DC-in 20v Po er Adapter
Ethernet RJ-45 Ethernet LAN port
Cash Drawer RJ-11 12v/24v Cash Dra er
HDMI HDMI Type A HDMI port for 2
nd
display
USB USB Type A USB 2.0
USB USB Type A USB 2.0 / USB 2.0 for OTG
COM 1 RJ-45 RI / 5v / 12v (select in system setting)
5v : Green / 12v : Orange
COM 2 RJ-45 RI / 5v / 12v (select in system setting)
5v : Green / 12v : Orange
Standard Optional
1 XP-3125W 1 Wifi Module
2 Po er Adapter (90W) 2 MSR / I Button / RFID / Fingerprint
3 AC Po er Cord 3 2 x 20 / 2x 24 LCM Customer Display
4 RJ45-DB9 Cable 4 2MP Camera
DC IN
20V
HDMI
Cash
Drawer
Ethernet
M
icro SD card
slot
USB 2.0
USB 2.0
USB 2.0
USB OTG
COM
1
COM
2

2
2. . H Ha ar rd dw wa ar re e I In ns st ta al ll la at ti io on n a an nd d U Up pg gr ra ad de e
Install 2x20 (2x24) customer display
1. Turn off the computer properly through the operating system, and turn off any external devices
2. Disconnect power cord from the computer
3. Remove the top cover from panel head
4. Connect the customer display cable with the panel 4 pin cable
5. Install the two screws that attached the customer display to panel head.
SWITCH OFF POWER AND UNPLUG POWER CORD BEFORE
SATA STORAGE IS REMOVED

Install Add-on Device
1. remove plastic cover
2. plug in ID device (USB) and
fix it via 1 x M3 screw
Make sure the device voltage matches the power setting before connection

3
3. . S So of ft tw wa ar re e C Co on nf fi ig gu ur ra at ti io on n
IO Port Power Setting
1. Find Setting into operating system desktop
2. Click Device Status, you may see the options for setting on COM port and C/D port
3. Choose the power output you request.