Fisher & Paykel CGI905DNGTB User manual

USER GUIDE
NZ AU
COMBI: GAS + INDUCTION COOKTOP
MINIMAL
CGI905DNGTB, CGI905DLPTB4,
CGI60DNGTB4, CGI60DLPTB4

CONTENTS
Safety and warnings 4
First use 8
Safety features 9
Cookware 10
Using your burner 12
Using your induction zones 14
SmartZones 16
PowerBoost 18
GentleHeat 19
Auto RapidHeat 20
Using the timer 22
Cooking guide 24
Care and cleaning 27
Troubleshooting 30
Energy guidelines 34
Warranty and service 35
Registration
To register your product visit our website: fisherpaykel.com/register
3

SAFETY AND WARNINGS
!WARNING!
Electrical Shock Hazard
Failure to follow this advice may result in
electrical shock or death.
• Switch the power to the cooktop off at the wall
before cleaning or maintenance.
• Do not cook on a broken or cracked cooktop. If
the glass should break or crack, turn off the gas
supply and switch the appliance off immediately
at the mains power supply (wall switch) and
contact a qualified technician.
!WARNING!
Fire Hazard
Failure to follow this advice may result in
serious injury.
• Never leave the appliance unattended when
in use. Boilover causes smoking and greasy
spillovers that may ignite.
• Do not store items on cooking surfaces.
!WARNING!
Health Hazard
Failure to follow this advice may result
in death.
• This appliance complies with electromagnetic
safety standards. However, persons with cardiac
pacemakers or other electrical implants (such
as insulin pumps) must consult with their doctor
or implant manufacturer before using this
appliance to make sure that their implants will
not be affected by the electromagnetic field.
4

SAFETY AND WARNINGS
!WARNING!
Explosion Hazard
Failure to follow this advice may result in
death or serious injury.
• Do not use or store flammable materials such as
gasoline near this appliance.
• Do not spray aerosols in the vicinity of this
appliance while it is in operation.
!WARNING!
Hot Surface Hazard
Failure to follow this advice may result in
serious injury.
• This appliance becomes hot during use. Do not
touch the cooktop components, burner, pan
supports or the glass when hot.
• Never leave metal objects (such as kitchen
utensils) or empty pans on the cooktop as they
can become hot very quickly.
• Magnetisable metal objects worn on the body
may become hot in the vicinity of the cooktop.
Gold or silver jewellery will not be affected.
!WARNING!
Poisoning Hazard
Failure to follow this advice may result in
poisoning or death.
• Never use this appliance as a space heater to
heat or warm the room. Doing so may result in
carbon monoxide poisoning and overheating of
the appliance.
5

SAFETY AND WARNINGS
READ AND SAVE THIS GUIDE
WARNING!
To reduce the risk of fire, injury to persons or damage when using the appliance, follow
the important safety instructions listed below. Read all the guidance before using
the appliance.
General Use
zNever use your appliance as a work or storage surface.
zWear proper apparel — Loose-fitting or hanging garments should never be worn while
using the appliance.
zDo not place articles on or against this appliance.
zIf the appliance is connected to the gas supply with a flexible hose, ensure that the
hose cannot come in contact with the bottom of the appliance or any sharp edges.
zThis appliance should be connected to a circuit that incorporates an isolating switch
providing full disconnection from the electricity supply.
zDo not use an asbestos mat or decorative covers between the flame and the saucepan
as this may cause serious damage to your cooktop.
zDo not place aluminium foil or plastic dishes on the cooktop burner.
zDo not let large saucepans, frying pans or woks push any other pans aside. This could
make them unstable or deflect heat onto your benchtop and damage the surface.
zSaucepan handles may be hot to touch. Ensure saucepan handles do not overhang
other cooking zones that are on. Keep handles out of reach of children.
zNever leave any objects or utensils on the appliance.
zDo not place or leave any magnetisable objects or electronic devices near the
appliance, as they may be affected by its electromagnetic field.
zWe recommend using plastic or wooden kitchen utensils for cooking with your
induction cook surface.
zFlammable materials should not be stored in an oven or near surface units.
zDo not place or leave aluminum foil on the cooktop.
zNever use your appliance for warming or heating the room.
zDo not use water on grease fires. Smother fire or flames or use dry chemical or
foam-type extinguisher.
zMoist or damp potholders on hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel or other bulky cloth.
zThis appliance is equipped with one or more surface units of different size. Always
place small pans in the centre of the cooking zone.
Select utensils having flat bottoms large enough to cover the surface unit heating
element. The use of undersized utensils will expose a portion of the heating element
to direct contact and may result in ignition of clothing. Proper relationship of utensil to
burner will also improve efficiency.
zAfter use, always turn off the cooking zones and the cooktop as described in this
guide. Do not rely on the pan detection feature to turn off the cooking zones when you
remove the pans.
zDo not place or drop heavy objects on your cooktop.
zDo not stand on your cooktop.
zDo not use pans with jagged edges or drag pans across the ceramic glass surface as
this can scratch the glass.
zDo not operate your cooktop by means of an external timer or separate
remote-control system.
zCaution: The cooking process has to be supervised. A short term cooking process has
to be supervised continuously.
6

SAFETY AND WARNINGS
zEnsure the electrical connection is accessible after installation
Child Safety
zDo not allow children to play with the appliance or sit, stand, or climb on it.
zDo not store items of interest to children in cabinets above the appliance. Children
climbing on the cooktop could be seriously injured.
zPacking elements (eg plastic bags, polystyrene foam) should not be left around within
easy reach of children, as these can cause serious injuries.
zDo not leave children alone or unattended in the area where the appliance is in
use. Children of less than 8 years old must be kept away from the appliance unless
continuously supervised. This appliance can be used by children aged from 8 years
and above, and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge, if they have been given supervision or
instruction concerning the use of the appliance in a safe way and they understand
the hazards involved. Cleaning and user maintenance shall not be done by children
without supervision.
Cleaning
zClean cooktop with caution — If a wet sponge or cloth is used to wipe spills on a hot
cooking area, be careful to avoid steam burn. Some cleaners can produce noxious
fumes if applied to a hot surface.
zDo not use a steam cleaner to clean your cooktop.
zDo not use scourers or any other harsh/abrasive cleaning agents to clean your cooktop,
as these can scratch the ceramic glass.
zBefore cleaning, turn the burner off and make sure the whole cooktop is cool.
Servicing
zDo not modify this appliance.
zDo not repair or replace any part of the appliance unless specifically recommended in
the user guide. All other servicing should be undertaken be a Fisher & Paykel trained
and supported service technician or qualified person.
zIf the power supply cable is damaged, it must only be replaced by a
qualified technician.
zIf the appliance is malfunctioning, it will display an alert code: first note down the
alert code, then contact your Authorized Service Center or Customer Care to arrange
for service. Do not use your appliance until it has been repaired by a Fisher & Paykel
authorized technician.
Standard Requirements
zThis induction cooktop generates and uses ISM frequency energy that heats cookware
by using an electromagnetic field. It has been tested and complies with Part 18 of the
FCC Rules for ISM equipment. This induction cooktop meets the FCC requirements to
minimize interference with other devices in residential installation. Induction cooktops
may cause interference with television or radio reception. If interfence occurs, the user
should try to correct the interference by:
zRelocating the receiving antenna of the radio or television
zIncreasing the distance between the cooktop and the receiver
zConnecting the receiver into an outlet different than the receiver.
WARNING!
Do not place metal objects on top of the control panel when the cooktop is in use.
7

FIRST USE
Cooktop features
1 Dual wok burner
2 Pan support
3 Induction zones
4 Control panel
5 Burner dial
6 Zone indicator
7 Zone display
8 Zone heat selector
9 GentleHeat control
!0 GentleHeat indicators
!1 Cooktop ON/OFF
!2 Timer control
!3 Timer display
!4 Keylock
1
Zone display Description
Cooking zone off
(not activated)
Cooking zone on
(activated but not operating)
Power levels
PowerBoost feature
Hot Surface indicator
Pan detection indicator
Bridged zone indicator
Zone timer indicator
Touch display
Your induction zones are operated
using an intuitive touch display.
Use the control panel to navigate
cooking settings.
Using the touch controls
Use the ball of your finger, not its
tip. The controls respond to touch,
so pressure is not needed.
3
3
45
2
!3
!2
8
!1 !4
6
7
!0
9
8

SAFETY FEATURES
The cooktop control dials can be locked for cleaning and to prevent unintended use.
When the cooktop is locked the controls and cooktop display will remain unresponsive.
Ensure all cooking zones have been turned
to OFF. Touch and hold the keylock control
for 5 seconds. The indicator light above
the control comes on, indicating that the
controls are locked.
To unlock the cooktop, touch and hold
the keylock control for 3 seconds. The
indicator light above the control goes
out. Your cooktop is now unlocked.
LOCKING THE COOKTOP UNLOCKING THE COOKTOP
9

COOKWARE
CGI603DTB CGI905DTB
Cooking zone Min. pan size* max. pan size*
1 Dual wok
burner
without small pan support 200mm 340mm
with wok stand no minimum 400mm
2 Smartzone
unbridged 120mm no maximum
bridged 250mm no maximum
Cookware size
For optimal performance, ensure the size of the cookware is suitable for the zone in use.
* Recommended
10

COOKWARE
Quickest heating Performance
High content of ferromagnetic material. Heating area is
consistent across the base and up the sides of pan.
Average heating Performance
Reduced area of ferromagnetic material. Reduced zone of
heating, results in poor performance and slower heating.
Slow heating Performance
Very limited area of ferromagnetic material. Results in very
slow heating performance.
Note: This type of pot is good for very delicate tasks such
as melting chocolate, as heating is very slow.
The quality of your cookware can affect cooking performance. Only use
induction-compatible cookware that has been specifically designed for induction cooking.
Look for the induction symbol on the packaging or the bottom of the pan.
Ensure the base of your cookware is smooth, sits flat against the glass, and is similar in size
as the cooking zone. A small pot on a large cooking zone may not be detected. Always
centre your pan on the cooking zone and lift pans off the cooktop – do not slide, or they
may scratch the glass.
Suitable cookware material:
zstainless steel –
with a magnetic base or core
zaluminium and copper –
with a magnetic base or core
zcast iron
zsteel
zenamelled steel.
Unsuitable cookware material:
zaluminium or copper –
without a magnetic base
zglass
zwood
zporcelain
zceramic or earthenware.
To check if cookware material is suitable for induction use, carry out a magnet test:
Move a magnet across the base of the pan. If the magnet is attracted, the pan is induction
suitable. Ensure attraction is consistent across the base of the pan. If there are gaps, such
as an indented manufacturer’s logo, then the performance will be impaired.
If you do not have a magnet, fill the pan with some water and refer to section ‘Using your
induction zones’. If does not flash and the water is heating, pan is suitable.
Induction cookware
11

USING YOUR BURNER
When using your burner, you can choose to
use the inner burner only or both the inner
and outer burners as desired.
Setting both the inner and outer rings
Turn the dial to any heat setting between
MEDIUM and HIGH before releasing.
If the flame on the outer ring appears to
flutter, turn the dial towards HIGH to stabilise.
Setting the inner ring
Turn the dial to any heat setting between
MEDIUM and LOW before releasing.
2
3
LOW MEDIUM
MEDIUM HIGH
Inner and outer burners Inner burner only
1
Push the dial down and turn counterclockwise
to the highest heat setting.Once the burner is
lit, hold the dial down for a further 3 seconds.
A clicking sound should be present when
igniting the burner. If no clicking is present,
turn the dial clockwise back to O (OFF) and
refer to ‘Troubleshooting’.
LOW HIGH OFF
12

USING YOUR BURNER
Manual lighting
If the burner will not light after several attempts, it can be manually lit. If you have
attempted to light the burner with the ignition, allow 1 minute for any accumulated gas to
dissipate before manually lighting.
Wait until the flame is burning evenly before
turning the dial to any heat setting between
HIGH and LOW before releasing.
Do not set or leave the dial between HIGH
and O (OFF).
When you have finished cooking, turn the
dial clockwise back to O (OFF).
1
2
3
4
Carefully hold a lit match near the burner.
Push the dial down and turn counterclockwise
to the highest heat setting. Once the burner is
lit continue to hold the dial down for a further
3 seconds.
13

USING YOUR INDUCTION ZONES
To begin cooking
Touch and hold the ON/OFF control for
2 seconds. The indicator light above the
control will glow.
0will appear in the cooking zone display.
Place a suitable pan on the cooking zone.
Ensure the bottom of the pan and the surface
of the cooking zone are clean and dry.
Always place small pans in the centre of the
cooking zone.
Select a heat setting by touching or sliding
the setting selector with your finger.
zIf you don’t select a heat setting within
10 seconds, the cooktop will automatically
turn off.
zYou can modify the heat setting at any
time during cooking.
1
2
3
4
14

USING YOUR INDUCTION ZONES
Turn the cooking zone off:
Touch or slide the setting selector until 0 shows in the
zone display.
Turn the cooktop off:
touch the ON/OFF control.
If Hflashes in the display:
Hwill flash in the cooking zone display of any zone
that is too hot to touch. It will remain illuminated until
it has cooled to a safe temperature.
If flashes alternately with the heat setting:
the pan may not be located on the correct cooking
zone, it may not be centred correctly or it may not
suitable for induction cooking.
No heating will take place until a suitable pan is
detected. The cooktop will turn off after 10 minutes if
no suitable pan is used.
15

SMARTZONES
The SmartZones can accommodate several small pots. These
small pots will be detected as one large pot.
The entire SmartZone is activated when a pot is detected. This
means that other magnetic items (such as cutlery) sitting in the
cooking zone will heat up. Do not leave cutlery or other magnetic
items on your cooktop.
Bridging Zones
The bridging zone function allows you to use two SmartZones together.
zYou can only bridge a cooking zone with the one directly behind it.
zThere may be a cooler area in the centre of the cooktop between the cooking zones. You
may need to move food around the pan to ensure even cooking.
zWhen using bridging zones, it is not possible to use the PowerBoost function.
Place the pan over the two zones
you wish to use, ensuring both zones
are covered.
1
2
3
Touch anywhere on the setting
selectors of both cooking zones at the
same time.
will show in both control windows, 0
will show in the left hand display and
in the right hand display.
Use the left setting selector to set the
heat setting for the combined zone.
The heat setting will be displayed in
the left zone display while the right
hand selector will show . The setting
indicator will glow on both zones.
16

SMARTZONES
If no pan is detected on one cooking zone:
The left hand display will still show the selected temperature and the right hand display will
still show .
If after 10 minutes no pan is detected:
zThe bridging function will switch off.
zThe cooking zone without a detectable pan will turn off.
zThe remaining cooking zone will continue cooking at the selected heat setting.
Using the timer in bridged mode:
You may only set one timer for the bridged cooking zone. See ‘Using the timer’. The timer
indicator will show in both displays.
Cancelling bridging will also cancel the timer for those cooking zones.
To cancel bridging
Touch the setting selectors of both
bridged cooking zones at the same time.
The bridging indicator lights will dim.
Sliding the scale down to 0will not turn
off bridging.
17

POWERBOOST
Using PowerBoost
This feature enables you to sear meat or bring liquid to boil very quickly. When a cooking
zone is set to PowerBoost, it uses more than 100% of the power of that particular cooking
zone, resulting in a boost of intense heat. PowerBoost heats food and liquids very quickly.
Do not leave the cooktop unattended when using this feature.
Setting PowerBoost
1
2
3
Once PowerBoost is set, the cooking zone
will heat more than 100% for 10 minutes.
Pwill flash for a few seconds before the
cooking zone automatically reduces the heat
to setting 9.
Slide the setting selector to set the
cooking zone to the highest heat level.
Hold until Pdisplayed.
You can set one (CGI60 models) or
two (CGI905 models) cooking zones for
PowerBoost, as long as one is not behind
the other.
zIf one cooking zone is set to PowerBoost and a second cooking zone in front or behind
the first cooking zone is accidentlly set to PowerBoost, Pwill flash on the first cooking
zone to alert that the configuration is not possible and power is automatically decreased.
zWhen a cooking zone is set for PowerBoost, the other cooking zone in front of or behind
may automatically reduce its power level.
zPowerBoost is not available if cooking zones are bridged.
To cancel PowerBoost
Slide the setting selector to a new heat setting or to 0to turn off the zone.
18

GENTLEHEAT
Using GentleHeat
There are two GentleHeat settings.
zThe Low setting is ideal for the most delicate cooking tasks (such as melting
chocolate), as the cooking zone will provide a very low continuous gentle heat.
zThe Medium setting is ideal for keeping cooked food warm and the gentle warming
of delicate foods.
Setting up a cooking zone for GentleHeat
For Medium setting
With cooking zone turned on, touch the
GentleHeat control again to select the
Medium setting.
zThe Medium setting indicator above
will glow and the Low setting indicator
goes out.
zTouching the GentleHeat control a third
time will switch off the cooking zone.
2
To quit the GentleHeat setting
Touch or slide the setting selector to a new setting or to 0to turn the cooking zone off.
For Low setting
Touch and hold the GentleHeat control on the
setting selector.
The Low setting indicator above will glow and
will show in the display.
1
19

AUTO RAPIDHEAT
Initially, while the cooking zone is at the
highest setting, Awill flash alternately with
your selected lower setting. The length of
time at the highest setting depends on the
selected lower heat setting.
3
Using Auto RapidHeat
This feature enables the cooking zones to:
zheat up food or liquid quickly at the
highest setting, and
zreduce the temperature automatically
to a pre-selected heat setting.
The amount of time the cooking zone
will rapidly heat depends on the selected
heat setting.
Setting a cooking zone for Auto RapidHeat
With cooking zone turned on, touch and
slide the setting selector to the desired level
of reduced heat for the cooking zone.
Keep your finger on the selector.
Hold your finger on the selector for 3 seconds
until the letter Astarts to flash alternately
with the selected temperature.
zLift up your finger once setting
is complete.
1
2
HEAT SETTING APPROXIMATE TIME
AT RAPID HEAT
1 40 seconds
2 1 minute
3 2 minutes
4 3 minutes
5 4 minutes
6 7 minutes
7 2 minutes
8 3 minutes
20