Fisher & Paykel HT90GHB2 Configuration guide

Cleaning and Maintenance
Never use abrasive or oil based cleaners
Maintenance
Before performing any cleaning or maintenance on your cooker hood, ensure that the power supply is switched off to the
hood.
The cooker hood should be cleaned regularly using a mild, liquid detergent to avoid a build-up of grease occurring.
Grease deposits are corrosive which can damage your cooker hood.
In areas of high humidity or coastal environments, cleaning should be carried out
frequently.
Aluminium Filter
• Depending on use, and at least once a month, the aluminium grease filter should be removed and cleaned with
hot soapy water or in the dishwasher.
• If washed in the dishwasher, the filter should be placed in an upright position to prevent food from falling on it.
• After rinsing and drying, replace the filter.
Some discolouration of the frames may occur.
https://producthelp.fisherpaykel.com/eu/Cook/Cooker_Hoods/Canopy/HT90GHB2/User_Guide_HT90GHB2/06_cleaning_and…
Updated: Mon, 20 Mar 2023 04:34:58 GMT
Powered by
1

Removing the Aluminium Filter:
1. Open the front panel of the cooker hood.
2. Pull the filter catch, tilt the filter outward and disengage it from the supports.
3. Reverse these instructions when refitting the filter.
1
23
Carbon Filter – For Use in Recirculation Mode
Active carbon filters are disposable items designed to remove grease and odours from cooking vapours before the air is
channelled back into the kitchen. The active carbon filter must be replaced periodically to work properly, at least once
every three months, depending on the frequency of use of the cooker hood.
Fully saturated carbon filters can become a barrier to air movement therefore limiting
cooker hood performance. In the event of fire, grease laden filters could be flammable and
therefore regular replacement is recommended.
Replacing the Light Bulb:
Please note replacement light bulbs are not covered by warranty.
1. Before changing the light bulb, ensure the cooker hood is disconnected from the power supply.
https://producthelp.fisherpaykel.com/eu/Cook/Cooker_Hoods/Canopy/HT90GHB2/User_Guide_HT90GHB2/06_cleaning_and…
Updated: Mon, 20 Mar 2023 04:34:58 GMT
Powered by
2

2. Remove the aluminium grease filter.
3. Replace light bulbs.
4. Refit the aluminium filter.
https://producthelp.fisherpaykel.com/eu/Cook/Cooker_Hoods/Canopy/HT90GHB2/User_Guide_HT90GHB2/06_cleaning_and…
Updated: Mon, 20 Mar 2023 04:34:58 GMT
Powered by
3