Fisher-Price MIRACLES&MILESTONE H9998 User manual

Mix & Match
Musical Mobile
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Requires four "C" (LR14) alkaline batteries for operation (not included).
Tool required for assembly: Phillips screwdriver (not included).
www.fisher-price.com
H9998

2
WARNING
• Possible entanglement injury. Keep out of baby's reach.
• Remove mobile portion from crib or playpen when baby
begins to push up on hands and knees.
Parts
CAUTION
This toy contains small parts in its unassembled state.
Adult assembly is required.
• A crib mobile is intended for visual stimulation and is not to be grasped by a child.
• Remove mobile portion from crib or playpen when baby begins to push up on
hands and knees.
• Always attach with all provided fasteners (clamp) tightly to a crib or playpen
according to the instructions. Check frequently.
• Do not add additional strings or straps to attach to a crib or playpen.
Dome
3 Discs
Frame
Crib Adapter
3 Soft Toys
Arm
Base
Clamp
Note: Tighten and loosen all screws with a Phillips screwdriver. Do not overtighten.

3
Battery Installation
Battery
Compartment
Door
• Locate the battery compartment door on the back of the base.
• Loosen the screws in the battery compartment door and remove the battery
compartment door
• Insert four "C" (LR14) alkaline batteries.
Hint: We recommend using alkaline batteries for longer life.
• Replace the battery compartment door and tighten the screws .
• When sounds or light become faint or movement of the mobile is sluggish, it’s
time for an adult to change the batteries!
• Protect the environment by not disposing of this product with household
waste (2002/96/EC). Check your local authority for recycling advice and
facilities (Europe only).

4
Battery Safety Information
1.5V x 4
“C” (LR14)
In exceptional circumstances, batteries may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted
batteries from the product. Dispose of batteries safely. Do not dispose of
the product in a fire. The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged
under adult supervision.
Shown Actual Size

5
Assembly
• Fit the crib adapter to
the base.
• Tighten the three screws
in the crib adapter.
Crib Adapter
1
1
• Fit the peg on a disc onto
one of the posts on the
frame, as shown.
• Tighten the screw in the
disc.
• Repeat this procedure to
attach the other two discs
to the frame.
Disc
1
2
Frame

6
Assembly
• Fit the dome into the end
of the arm.
• Tighten the screw in
the dome.
Dome
Arm
1
3
• "Snap" the frame to the
underside of the dome,
as shown.
1
4
Frame
Dome

7
Assembly
• Slide the arm into the
opening in top of the
base.
• Tighten the screw in
the arm.
1
5
You can attach the soft toys to
either the mobile (over baby's
head) or to the base (inside
the crib).
Mobile Attachment
• Fit a soft toy strap up through a
slot in a disk. Pull down on the
strap so that the end forms a
"T" on top of the disc.
• Repeat this procedure to attach
the other two soft toys to the
remaining discs.
Base Attachment
• Fit the "T" on the end of each
soft toy strap into the three
slots on the back of the base,
as shown.
1
6
OR

8
Crib Attachment
• Fit the base on the crib
top rail, so that the
threaded peg extends
outside the crib.
• Fit the clamp onto the
threaded peg and turn
the clamp clockwise to
secure the base to the
crib rail. Do not over-
tighten the clamp.
1
7
Base
Crib Top Rail
Clamp
• If the distance between
the toy and the mattress
is less than 7 inches,
lower the crib mattress.
Mattress
WARNING
To prevent entrapment of baby's head, keep distance
between the bottom of the product and the crib mattress
to at least 7 inches.
Bottom of Toy
At least
7 inches

9
Lights, Sounds and Gentle Motions
Press to choose from
classical musical selections.
Press to turn
lights on or off.
Press to
choose lullabies.
Press to start or
stop the motion.
Locate the mode switch on the top of the base.
Slide the switch to one of the following positions:
Enjoy about 10 minutes of soft lights,
motions and music at higher volume.
Choose this position for lights, motions and music with lower volume.
Set to this position for lights and motions without music.
Slide the switch to this position to turn off.
Mode Switch
Enjoy projected lights on baby's ceiling, soft music and gentle motions.
Mode Switch

10
Change to a Crib Side Music Box
• Loosen the screw in the
arm and remove the arm
from the base.
1
2
When baby outgrows the mobile, follow these steps to convert to a music
box with ceiling projection.
• Slide the latches on the
underside of the dome
and pull to remove the
frame. Set the frame
aside.
1
1
Bottom View

11
Change to a Crib Side Music Box
• Loosen the screw in the
dome and remove the
dome from the arm. Set
the arm aside.
1
3
• Slide the dome into the
slot in the top of the base
so that the dome faces
away from the crib.
• Tighten the screw in the
dome. Store the arm and
frame in a safe place.
1
4

12
Care
Soft Toys
• Place the soft toys in a pillowcase and wash them in cold water on gentle cycle.
Tumble dry on low heat. Do not use bleach.
Mobile Base, Arm and Dome
• Wipe the toy with a clean cloth dampened with a mild soap and water solution.
Do not immerse the toy.
FCC Statement (United States Only)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the equipment.
Visit us on-line at www.service.fisher-price.com.
Call Fisher-Price®Consumer Relations, toll-free at 1-800-432-5437, 9 AM- 7 PM EST
Monday through Friday and 11 AM - 5 PM EST Saturdays. Hearing-impaired
consumers using TTY/TDD equipment, please call 1-800-382-7470.
Write to us at: Fisher-Price®Consumer Relations
636 Girard Avenue, East Aurora, New York 14052
For countries outside the United States:
CANADA - Questions? 1-800-567-7724, Mattel Canada Inc., 6155 Freemont Blvd., Mississauga,
Ontario L5R 3W2; www.service.mattel.com.
GREAT BRITAIN - Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303;
www.service.mattel.com/uk.
AUSTRALIA - Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND - 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA - Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City,
Tsimshatsui, HK, China.
Consumer Information
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052 U.S.A.
©2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA H9998a-0920