Fisher-Price 77812 User manual

FCC Note (United States Only)
FCC Note (United States Only)
Care
Care
Clean Up!
Clean Up!
Fisher-Price, Inc., is a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A. Printed in China
©2000 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. 77812pr-0920
Tool Kit
Model Number 77812
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Wipe this toy with a clean cloth dampened with a mild soap and water solution.
Do not immerse this toy.
• Store the drill with regular bit, the
bolts and the screwdriver bit in their
designated areas in one side of the
tool kit.
• Place the remaining tools on top in the
same side of the tool kit as shown
above and close.
If you have any questions about this product:
In CANADA, Mattel Canada Inc. 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2. Questions? 1-800-567-7724
In GREAT BRITAIN, Mattel U.K., Ltd. Helpline: 01628 500303.
In AUSTRALIA, Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1-800-800-812 (valid only in Australia).
TOOL KIT
TOOL KIT
Instructions
Please keep these instructions for future reference.
Requires two, “AA” batteries for operation (included).
Adult assembly is required for battery replacement.
Tool required to replace batteries: Phillips screwdriver (not included).
Product Number 77812
Product features may vary from the photo above.
Questions? We'd like to hear from you!
Call Fisher-Price®Consumer Relations, toll-free at 1-800-432-KIDS, 8 AM - 6 PM EST Monday through
Friday. Hearing-impaired consumers using TTY/TTD equipment, please call 1-800-382-7470.
Or, write to: Fisher-Price®Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052.
77812pr-0920.qrk 10/25/0 12:05 PM Page 1

Building Fun
Building Fun
Drill Bit
Drill
Saw Bit
Drill Chuck
Screwdriver Bit
Forward/
Reverse
Button
3
• Push and lock in one of the bits into the drill chuck.
• Press the forward/reverse button up or down to change direction of the motor.
• Use the side of the tool kit with holes in it as a workbench.
• Use the wrench or the drill with the screwdriver bit to drive in bolts.
• Drive bolts through the builder shapes to make different designs.
Tool Kit 8 Assorted
Builder
Shapes
6 Bolts
1 Wrench
Battery Replacement
Battery Replacement
Battery Compartment
Battery Compartment Door
Drill Handle
Battery Tips:
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use. Always remove exhausted
batteries from the toy. Battery leakage and corrosion can damage this toy.
Dispose of batteries safely.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the “Battery
Replacement” instructions are to be used.
• If rechargeable batteries are used, they are only to be charged under
adult supervision.
• Rechargeable batteries are to be removed from the toy before they are charged.
• If you use a battery charger, it should be examined regularly for damage to the
cord, plug, enclosure and other parts. Do not use a damaged battery charger
until it has been properly repaired.
• When sounds from the toy become faint or stop, it's time for an adult to change
the batteries!
2
• Locate the battery compartment door on the bottom of the drill handle.
• Loosen the screws in the battery compartment door with a Phillips screwdriver
and remove the door.
• Carefully remove the exhausted batteries from the battery compartment. Properly
discard the batteries.
• Insert two, new, “AA” alkaline batteries (LR6) in the battery compartment as
indicated inside the battery compartment.
Helpful Hint: We recommend using alkaline batteries for longer
battery life.
• Replace the battery compartment door and tighten the screws with a Phillips
screwdriver. Do not over-tighten.
1.5V x 2
“AA” (LR6)
Shown Actual Size
For best performance, we recommend replacing the batteries that
came with this toy with two, new “AA” alkaline batteries.
+
77812pr-0920.qrk 10/25/0 12:05 PM Page 3