Fisher-Price ALPHA BUS B4860 User manual

w
w
w.
fi
s
he
r
-p
r
i
c
e
.
c
o
m
Alpha Bus™
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “AA” batteries (included).
Adult assembly is required for battery replacement.
Tool required for battery replacement:
Phillips screwdriver (not included).
B4860
Instructions

Battery Replacement
For best results, we recommend
replacing the batteries that came
with this toy with three, new “AA”
(LR6) alkaline batteries.
• Locate the battery compartment
on the bottom of the toy.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door. Throw the
exhausted batteries away.
• Insert three, new “AA” (LR6) alkaline
batteries, as indicated inside the
battery compartment.
Hint: We recommend using
alkaline batteries for longer
battery life.
• Replace the battery compartment
door and tighten the screw with
a Phillips screwdriver. Do not
over-tighten.
•When sounds or lights from this toy
become faint or stop, it’s time for
an adult to change the batteries!
2
1.5V x 3
“AA” (LR6)
Shown Actual Size
Battery Safety Information
Batteries may leak fluids that can
cause a chemical burn injury or ruin
your toy. To avoid battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or recharge-
able (nickel-cadmium).
• Insert batteries as indicated on the
battery compartment door.
• Remove batteries during long periods
of non-use. Always remove exhaust-
ed batteries from the toy. Dispose of
batteries safely. Do not dispose of
batteries in a fire. The batteries may
explode or leak.
• Never short-circuit the bat-
tery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the toy before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
Battery
Compartment
Door

3
Learning Fun for Baby!
Volume Switch Mode Switch
Mode Switch Mode Switch
• To change modes, slide the mode switch to one of the three positions:
learning fun ; off ;or musical fun .
• Set the volume switch on the bottom of the toy to low or high volume.
Hint: If your child is not actively playing with this toy, it turns off automatically
(sleep mode).
• When your child is finished playing with this toy, slide the mode switch
to the off position .
Learning Fun Musical Fun
• Slide the mode switch to
Learning Fun .
• Press the large button to change
the pictures in the windows. As
the pictures spin a short tune plays.
• Press a letter button. A friendly
character identifies the picture
shown in the window above.
• Slide the mode switch to
Musical Fun .
• Press the large button to change
the pictures in the windows. As the
pictures spin a short tune plays.
• Press a letter button to hear a fun
sound effect that relates to the picture
above. Press again to hear a fun tune.
Large Button Letter Buttons

• Wipe the toy with a clean cloth dampened with a mild soap and water solution.
• Do not immerse the toy.
Questions? We'd like to hear from you!
Call Fisher-Price®Consumer Relations, toll-free at 1-800-432-5437, 8 AM - 6 PM EST
Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470. Or, write to: Fisher-Price®Consumer Relations,
636 Girard Avenue, East Aurora, New York 14052.
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A.
©2003 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Printed in China B4860pr-0920
Care
FCC Note (United States Only)
Consumer Information
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the equipment.
For countries outside the United States:
CANADA Questions? 1-800-567-7724. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
GREAT BRITAIN Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500302.
AUSTRALIA Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.