Fisher-Price BMH49 User manual

BMH49
CHY39
BMD80
Keep this instruction sheet for future reference,
as it contains important information.
Requires three AA batteries (included) for operation.
Batteries included are for demonstration purposes only.
Battery replacement is required. Only adults should replace batteries.
Adult assembly is required.
Tool required for battery replacement and assembly: Phillips screwdriver (not included).
fisher-price.com
Sit & playTummy time
Lay & play
Take-along

2
Consumer Information
©2016 Mattel. All Rights Reserved.
PRINTED IN CHINA BMH49-0970-G2-DOM
Care
• The mat and soft toy are machine washable.
Wash separately in cold water on the gentle
cycle. Do not use bleach. Tumble dry on
low heat.
• The arch, toys, bases and piano can be
wiped with a clean, damp cloth. Do not
immerse the piano.
CO
N
SU
MER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.

3
This package contains small
parts. For adult assembly only.
CAUTION
Assembled Parts
M3,5 x 1,3 cm Screw - 8
SHOWN ACTUAL SIZE
Tighten and loosen screws with a Phillips
screwdriver. Do not over-tighten screws.
Mirror
Piano
2 Hubs 2 Bases
4 Hanging Toys
Arch
Mat

4
3
2Mat
Lay & play
Sit & play
Assembly
1Piano
Base
Hub
The piano can be assembled to the hubs for
Lay & play or Sit & play modes.
• Fit a hub to a base.
Hint: The hubs are designed to fit each base
one way. If a hub does not seem to fit, try
assembling it to the other base.
• Insert four screws into the hub and tighten.
• Repeat this procedure to assemble the other
base and hub.
• Place the mat, print side up, between
the bases.
• Fit all three straps on each side of the mat
into the slots in the bases. Make sure the tab
on the end of each strap forms a "T" on the
other side of the slot.
• Pull up on the mat to be sure it is assembled
to the bases.
• Fit the piano onto the peg on each hub.
• Tighten each hub to secure the piano in place.

5
5
6
8
Arch
7
4
Mirror
Follow assembly steps 4 and 5 for
Lay & play mode.
Assembly
• From the back of the piano, fit a strap on
each end of the piano through a button hole
in the mat.
• Tie each strap to secure the mat to the piano.
• Fit the ends of the arch into the socket in
each base.
• Secure the fasteners on the mirror to the arch.
• Attach the toys to any of the loops on the arch
or the mat.

6
Battery
Replacement
Battery Safety
Information
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the product. Dispose of batteries
safely. Do not dispose of this product in
a fire. The batteries inside may explode
or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
1,5V x 3
AA (LR6)
• For longer life, use alkaline batteries.
• Locate the battery compartment door on the
back of the piano.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver and remove the door.
• Remove the exhausted batteries and dispose
of them properly.
• Insert three, new AA (LR6) alkaline
batteries.
• Replace the battery compartment door and
tighten the screws. Do not over-tighten.
• If this product begins to operate erratically,
you may need to reset the electronics. Slide
the power/volume switch off and then
back on.
• When sounds become faint or stop, it’s time
for an adult to change the batteries.
• Protect the environment by not
disposing of this product with
household waste (2012/19/EU).
Check your local authority for
recycling advice and facilities.

7
Musical Fun!
Power/Volume
Switch Mode Switch
WARNING
To prevent entanglement
injury, never place the gym in
a crib or playpen. Never add
strings, ties or other products
to the gym.
Loosen the pegs on the
supports and remove the
piano for take-along fun!
• Slide the power/volume switch to ON with
low volume , ON with high volume
or OFF .
• Slide the mode switch to Long Play or
Short Play mode.
Long Play - press a button to play
music (up to 15 minutes).
Short Play - press a button to play
a note and a short ditty.

8
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.This
equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.However, there is no
guarantee that interference will not occur
in a particular installation.If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced radio/
TV technician for help.
NOTE: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Consumer Information
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must accept
any interference, including interference that
may cause undesired operation of the device.
L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes : (1) il ne
doit pas produire de brouillage et (2) il doit
pouvoir tolérer tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible de
compromettre son fonctionnement.