Fisher-Price BRILLIANT BASIC K6670 User manual

www.fisher-price.com
K6670
Developmental classics
enrich baby’s play
™
Wagon
Walker

Parts
Base
2 Hubs
Handle
3 Shape Sorter
Blocks
Roller Ball
Part not shown: Label Sheet
2
Shape Sorter
Assembly
• Position the shape sorter with the
smooth outer edge facing up.
• At an angle, fit a peg on one side of the
shape sorter into the hole in the base.
• While bending the shape sorter slightly,
fit the other peg into the other hole in
the base.
1
Smooth Side Up

• At an angle, insert a peg on the roller
ball into the socket in the front of the
handle. Then, push to “snap” the other
peg on the roller ball into the other
socket in the handle.
3
Assembly
• “Snap” the hubs to the back of the
base, as shown.
2
• Press the buttons on the side of the
handle and “snap” the handle into the
openings in the base.
4
• Press the buttons on the side of the
handle and “snap” the handle into the
openings in the hubs.
5
Walker
PRESS
PRESS
Wagon
PRESS
PRESS
Hint: You can assemble the handle in
either of two positions: Walker or Wagon.
3

Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A.
©2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN MEXICO K6670a-0920
• Please keep this instruction sheet for future reference, as it contains
important information.
• Adult assembly is required.
• No tools needed for assembly.
• Wipe this toy with a clean cloth dampened with a mild soap and water solution.
Consumer Information
4

Decoration
Proper label application will help to
keep the labels looking their best!
• For best results, do not attempt to
apply a label more than once.
• Make sure the areas where the labels
will be applied are clean and dry. Wipe
this product with a clean, soft, dry cloth
to remove any dust or oils.
5

Easy Conversion
Walker-to-Wagon Wagon-to-Walker
• Press the buttons on the sides
of the handle and lift to remove
the base.
PRESS
PRESS
PRESS
• Press the buttons on the side of the
handle and “snap” the handle into
the hubs.
PRESS
PRESS
• Press the buttons on the side of
the handle and lift to remove from
the hubs.
PRESS
PRESS
• Press the buttons on the side of
the handle and “snap” the handle
into the base.
PRESS
PRESS
6
PRESS