Fisher-Price K6670 User manual

www.fisher-price.com
K6670
Wagon
Walker
K6670b-0920.indd 1 6/4/08 1:26:37 PM

Assembled Parts
Base
2 Hubs
Handle
Roller Ball
Part not shown: Label Sheet
2
Shape Sorter
Assembly
• Position the shape sorter with the
smooth outer edge facing up.
• At an angle, fit a peg on one side of the
shape sorter into a hole in the base.
• While bending the shape sorter slightly,
fit the other peg into the other hole on
the other side of the base.
1
Smooth Side Up
K6670b-0920.indd 2 6/4/08 1:26:47 PM

• At an angle, insert a peg on the roller
ball into the hole in the front of the
handle. Then, push to “snap” the other
peg on the roller ball into the other hole
in the handle.
3
Assembly
• “Snap” the hubs onto the wheels on
the back of the base.
2
• Press the buttons on the sides of the
handle and “snap” the handle into the
openings in the front of the base.
4
• Press the buttons on the side of the
handle and “snap” the handle into the
openings in the hubs on the back of the
base.
5
Walker
PRESS
PRESS
Wagon
PRESS
PRESS
Hint: You can assemble the handle in
two positions.
3
K6670b-0920.indd 3 6/4/08 1:26:48 PM

Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A.
©2008 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN MEXICO K6670b-0920
• Please keep this instruction sheet for future reference, as it contains
important information.
• Adult assembly is required.
• No tools needed for assembly.
• Wipe this toy with a clean cloth dampened with a mild soap and water solution.
Consumer Information
4
K6670b-0920.indd 4 6/4/08 1:26:48 PM

Decoration
Proper label application will help to
keep the labels looking their best!
• For best results, do not attempt to
apply a label more than once.
• Make sure the areas where the labels
will be applied are clean and dry. Wipe
this product with a clean, soft, dry cloth
to remove any dust or oils.
5
K6670b-0920.indd 5 6/4/08 1:26:49 PM

Easy Conversion
Walker-to-Wagon Wagon-to-Walker
• Press the buttons on the sides
of the handle and lift to remove
from the base.
PRESS
PRESS
PRESS
• Press the buttons on the sides of the
handle and “snap” the handle into
the hubs.
PRESS
PRESS
• Press the buttons on the sides of
the handle and lift to remove from
the hubs.
PRESS
PRESS
• Press the buttons on the sides of
the handle and “snap” the handle
into the base.
PRESS
PRESS
6
PRESS
K6670b-0920.indd 6 6/4/08 1:26:49 PM