Fisher-Price CDC54 User manual

fisher-price.com
CDC54
Please keep this instruction sheet for future reference, as it contains important information.
Requires three C (LR14) alkaline batteries (not included) for operation.
Adult assembly is required.
Tool required for battery installation: Phillips screwdriver (not included).
Wipe this toy with a clean cloth dampened with a mild soap and water solution.
Do not immerse this toy.
This toy has no consumer serviceable parts. Do not take this toy apart.
Check the plastic parts regularly and if broken or cracked, dispose of them properly.

Battery
Installation
Battery Safety
Information
• For longer life, use alkaline batteries.
• Locate the battery compartment on the base.
• Loosen the screw in the battery compartment
door and remove the door.
• Insert three C (LR14) alkaline batteries.
• Replace the battery compartment door and
tighten the screw.
• If this toy begins to operate erratically, you
may need to reset the electronics. Slide the
power/volume switch off and then back on.
• When sounds from this toy become faint
or stop, it’s time for an adult to change
the batteries.
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries
of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely.
Do not dispose of this product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
1,5V x 3
C (LR14)

• Flip up the fabric cover to locate the valve.
• Insert your finger into the fabric hole and
pull the valve out.
• Squeeze the stem on the valve to inflate the
lion. Do not over-inflate.
• Close the valve cover once inflated and push
the valve back inside the fabric.
• Replace the fabric cover.
Fabric Cover
Fabric Cover
Valve Cover
Valve Cover
Valve Stem
Valve Stem
Fabric
Cover
Assembly Wobblin’ ‘n Gigglin’ Fun!
• Slide the power/volume switch to ON with
low volume , ON with high volume or
OFF .
• Bat at the lion for musical sound effects as it
wobbles around!
Power/Volume Switch

CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must accept
any interference, including interference that
may cause undesired operation of the device.
L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes : (1) il ne
doit pas produire de brouillage et (2) il doit
pouvoir tolérer tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible de
compromettre son fonctionnement.
Consumer Information
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates
uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced radio/
TV technician for help.
NOTE: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
©2014 Mattel. All Rights Reserved.
PRINTED IN CHINA CDC54_1100209534_DOM