Fisher-Price CDL72 User manual

Please keep this instruction sheet for future reference,
as it contains important information.
Requires three C batteries (included). Batteries included are for
demonstration purposes only.
Battery replacement is required. Only adults should replace batteries.
Required tool: Phillips screwdriver (not included).
Wipe this toy with a clean damp cloth. Do not immerse.
This toy has no consumer serviceable parts. Do not take apart.
fisher-price.com
CDL72

Battery
Replacement
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries
of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely.
Do not dispose of this product in a fire.
The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.
• For longer life, use alkaline batteries.
• Loosen the screws in battery compartment
door and remove the door. Remove the
exhausted batteries and dispose properly.
• Insert three, new C (LR14) alkaline batteries.
• Replace the battery compartment door and
tighten the screws.
• If this toy begins to operate erratically, you
may need to reset the electronics. Slide the
power/volume switch off and back on.
• When sound/movement/light becomes
faint, slows or stops, it’s time for an adult to
change the batteries.
Battery Safety
Information
1,5V x 3
C (LR14)

Racing to Learn!
• Slide the switch to ON with low volume ,
ON with high volume or OFF .
Slide the Smart StagesTM switch to:
Explore – 9M+
Press a learning button for colors,
shapes, and numbers.
Encourage – 12M+
Press a learning button to hear it
identified. Then listen to the question and
press the button that answers the question.
Pretend – 18M+
Press a learning button for traffic rules
along with racing sound effects!
Open the gate!
Press for
learning fun!
Spin the roller to start the speedway.
Push the “shifter”
to lift the starting
block and start
the speedway!
Press for music or to
stop the speedway
for a song break.
Place puppy car on
the starting block and
push for fun phrases,
sound effects, musical
ditties and lights.
Power Volume Switch

©2014 Mattel. All Rights Reserved.
PRINTED IN CHINA CDL72_1100189979_DOM
Consumer Information
CO
N
SU
MER
ASS
I
S
T
A
N
C
E
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must accept
any interference, including interference that
may cause undesired operation of the device.
L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes : (1) il ne
doit pas produire de brouillage et (2) l’utilisateur
du dispositif doit être prêt à accepter tout
brouillage radioélectrique reçu, même si ce
brouillage est susceptible de compromettre le
fonctionnement du dispositif.
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
NOTE: Changes or modifications not
expressively approved by the manufacturer
responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.