Fisher-Price Code 'n Learn KinderBot FXG15 User manual

FXG15
TM
Keep this instruction sheet for future reference,
as it contains important information.

FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there
is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
NOTE: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
UNITED STATES: 1-800-432-5437.
Fisher-Price, Inc., 636 Girard Avenue,
East Aurora, NY 14052.
GREAT BRITAIN: Mattel UK Ltd,
Vanwall Business Park, Maidenhead
SL6 4UB. Helpline: 01628 500303;
www.service.mattel.com/uk.
Mattel Europa B.V., Gondel 1, 1186 MJ
Amstelveen, Nederland.
CANADA: 1-800-432-5437.
Mattel Canada Inc., 6155 Freemont
Blvd., Mississauga, Ontario L5R 3W2.
AUSTRALIA: Mattel Australia Pty. Ltd.,
658 Church Street, Locked Bag #870,
Richmond, Victoria 3121 Australia.
Consumer Advisory Service
1300 135 312.
NEW ZEALAND: 16-18 William
Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd., Room
503-09, North Tower, World Finance
Centre, Harbour City, Tsimshatsui, HK,
China. Tel.: [phone].
MALAYSIA: Diimport & Diedarkan
Oleh: Mattel Southeast Asia Pte. Ltd.,
No 19-1, Tower 3 Avenue 7, Bangsar
South City, No 8, Jalan Kerinchi,
59200 Kuala Lumpur, Malaysia.
Tel: [phone].
SOUTH AFRICA: Mattel South Africa
(PTY) LTD, Oce 102 I3, 30 Melrose
Boulevard, Johannesburg 2196.
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must accept
any interference, including interference that
may cause undesired operation of the device.
L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et
(2) il doit pouvoir tolérer tout brouillage
radioélectrique reçu, même si ce brouillage
est susceptible de compromettre son
fonctionnement.
©2019 Mattel. FXG15-0970
PRINTED IN CHINA 1102063713-DOM

3
BEFORE YOU BEGIN
Protect the environment by not disposing of this
product or any batteries with household waste.
This symbol indicates that this product shall not
be treated as household waste. Check your local
authority for recycling advice and facilities.
Wipe this toy with a clean, damp cloth.
Do not immerse.
Adult assembly required.
Required tool: Phillips screwdriver
(not included).
Adult assembly required.
Required tool: Phillips screwdriver
(not included).
Keep these instructions for future
reference as they contain important
information.
Keep these instructions for future
reference as they contain important
information.
1,5V x 4
AA (LR6)
1,5V x 2
“C” (R14)
1,5V x 2
“D” (R20)
1,5V x 2
AAA (LR03)
1,5V x 3
AG13 (LR44)
Includes four C (LR14) alkaline batteries. Batteries
included are for demonstration purposes only.
For longer battery life, use alkaline batteries.
Adult assembly is required. No tool is needed
for assembly.
Tool required to install batteries: Phillips
screwdriver (not included).
Slide the power switch to ON with low volume ,
ON with high volume or OFF .
x
4
1,5V
C
(LR14)

HELP! I NEED MY 3RD WHEEL!
4
PLEASE REPLACE MY BATTERIES
• Loosen the screws in my battery
compartment door and remove
the door.
• Remove the exhausted batteries
and properly dispose.
• Insert four, new C (LR14)
alkaline batteries.
• Replace my battery compartment
door and tighten the screws.
Do not over-tighten.
• When my sound/lights/motion
become faint, slow or stop,
it’s time for an adult to change
my batteries.
“Snap” my third
wheel into the
socket in my back.

BATTERY SAFETY INFORMATION
5
In exceptional circumstances, batteries may leak fluids that
can cause a chemical burn injury or ruin your product.
To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types:
alkaline, standard (carbon-zinc) or rechargeable.
• Insert batteries as indicated inside the battery compartment
(+ and -).
• Remove batteries during long periods of non-use. Always
remove exhausted batteries from the product. Dispose of
batteries safely. Do not dispose of this product in a fire.
The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only
to be charged under adult supervision.
Are you
ready
to code?

6 7 8 9
Early Engineering
• Use my plane/axle/wheel/
wedge to create and
demonstrate early engineering
concepts in my Secret
Codebook. Then program
the secret code for more fun!
SECRET CODES
• Grab my Secret Codebook, plane, axle,
wheel and wedge. Then press my Secret
Code button.
• Follow the instructions in
my Secret Codebook to
attach parts. Now enter the
secret code and pretend
along with me!
Let’s Create
• Can you code all of the
shapes in my Secret
Codebook?
Shapes
CODE MODE
• Press the Code Mode button on top
of my head.
• Press my arrow buttons up to 10 times to
create a path. With each press, you’ll see
my forehead light up the same color as
the code button.
• Press my Play button. I’ll follow your
coded path!
GO!
CHALLENGE MODE
• Press the Challenge Mode button on top
of my head.
• Listen carefully to my directions and
start coding.
• Press my Play button.
• Ready for a new challenge? Press the
Challenge Mode button again.
• Challenges get harder when you master
several challenges in a row.
GO!

10
DO YOU NEED HELP?
• It’s easy to cancel a code input or a code sequence. Press
the Xbutton on my head to erase the last input programmed.
Press again to cancel another input. If you want to cancel
a code sequence, press and hold my Xbutton. Don’t press
too hard, you might give me a headache!
• I move around a lot! Use me in a room that has at least
a 5 foot (1,52 meters) square free area.
• Uh-oh! If I run into a wall or tip over, turn me around or pick
me up and I’ll keep going.
• If you nudge me while I’m moving, I might look like I’m
a bit confused. I’ll find my way and continue on your
programmed code.
• If you aren’t playing with me, I’ll go to sleep after about
a minute. Press any of my buttons to wake me up.
• I’ll let you know when I’m tired and my battery power is low.
Time for an adult to change my batteries.
• If I seem to be acting erratically, try resetting my electronics.
Slide my power-volume switch off and back on.