Fisher-Price Count-with-Me Kitty 71930 User manual

(Alpha-Play Puppy and Count-with-Me Kitty sold separately.)
Please save these instructions for future reference.
Batteries must be replaced by an adult.
Requires three, size “AAA” batteries (included).
Tool needed to replace batteries: Phillips Screwdriver (not included).
Count-with-Me Kitty™
Model 71930
Alpha-Play Puppy™
Model 71929

• Open the fastener flap on
the back of the toy.
• Loosen the screw in the
battery compartment door
with a Phillips screwdriver.
• Lift to open the battery
compartment door.
• Insert three, size “AAA”
(LR03) alkaline batteries as
indicated inside the battery
compartment.
• Replace the battery
compartment door and
tighten the screw with a
Phillips screwdriver.
Do not over-tighten.
• Close the fastener flap.
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use. Always remove
exhausted batteries from this toy. Battery leakage and corrosion can
cause damage. Dispose of batteries safely.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the
“Battery Replacement” instructions are to be used.
• If removable rechargeable batteries are used, they are only to be
charged under adult supervision.
• Rechargeable batteries are to be removed from the toy before they
are charged.
• If you use a battery charger, it should be examined regularly for
damage to the cord, plug, enclosure and other parts. Do not use a
damaged battery charger until it has been properly repaired.
Battery Replacement
Note: For best performance, we
suggest replacing the batteries in
this toy with alkaline batteries upon
purchase. Use alkaline batteries for
longer battery life.
Fastener Flap
Light and
Sound Box
1.5V x 3
“AAA” (LR03)
SHOWN ACTUAL SIZE

Important! You must remove
the light and sound box
before washing! Do not
expose the light and sound
box to water.
• Open the fastener flap on
the back of the toy and
remove the light and sound
box from the clip.
• Place the toy in a pillow-
case and machine wash
cold with a mild detergent.
Do not use bleach. Tumble
dry on low heat.
• After drying, fit the light and
sound box back into the toy.
• Snap the tabs on the sides of the light and sound box into the slots
on the clip.
• If sound or lights from/on this product become faint, or if there is no sound
or lights, remove the batteries and dispose of them properly. Replace the
batteries with three, size “AAA” (LR03) alkaline batteries.
Clip
Slots
Tab
Light and
Sound Box
• Press the heart shaped tag on the front of the
toy for sound and lights.
Use
Care

Fisher-Price, Inc.,a subsidiary of Mattel, Inc., East Aurora, New York 14052
©1999 Mattel, Inc. All Rights Reserved. Printed in China
® and ™ designate U.S. trademarks of Mattel, Inc. 71929pr-0920
If you have any questions about this product:
In CANADA - Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2. Questions? 1-800-567-7724.
In GREAT BRITAIN - Mattel U.K., Ltd., Helpline: 01628 500303.
In AUSTRALIA - Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1-800-800-812 (valid only in Australia).
FCC Note (United States Only)
If you have any questions, please call Fisher-Price®Consumer Affairs,
toll-free at 1-800-432-KIDS, 8 AM - 5 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment, please call
1-800-382-7470. Or, write to: Fisher-Price, Inc.
Consumer Affairs Department
636 Girard Avenue
East Aurora, New York 14052
Consumer Information
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.