Fisher-Price W9898 User manual

fisher-price.co.uk
Please keep this instruction sheet for future reference,
Please keep this instruction sheet for future reference,
as it contains important information.
as it contains important information.
Adult assembly is required.
Adult assembly is required.
Requires two "AA" batteries (included).
Requires two "AA" batteries (included).
Batteries included are for demonstration purposes only.
Batteries included are for demonstration purposes only.
Tool required for assembly: Phillips screwdriver (not included).
Tool required for assembly: Phillips screwdriver (not included).
W9898

2
Assembly
• Insert a screw into the bottom of the
base and tighten.
• Repeat this procedure to assemble
the other small support and base.
• Fit a small support into the socket in
a base.
Hint: The small supports are designed
to fit into the bases one way. If a support
does not seem to fit, turn it around or
try assembling it to the other base.
Mat
Assembled Parts
2 Bases
3 Hanging Toys
2 Small Supports
Small Support
Base Socket
CAUTION
This package contains
small parts. For adult
assembly only.
Large
Support
Arch
BOTTOM VIEW
#6 x 1,9 cm Screw - 4
Screw shown actual size. Tighten all
screws with a Phillips screwdriver.
Do not over-tighten.
Screw
w
w
w
w
w
w
1
2

3
Assembly
• Fit the tabs on the large support into
the slots in the arch. Push to "snap"
into place. • Hook the toys to the loops on the arch.
• Fit the ends of the small supports
into the slots in the arch.
Hint: The small supports are designed
to fit into the arch one way. If they do
not seem to fit, turn the arch around
and try again. • Place the mat, decorated side up,
between the bases and large support.
• Fit the straps on the mat through the
slots in the support/bases. Make sure
the tab on the end of each strap forms
a "T" on the other side of each slot.
• Pull up on the mat to be sure all three
straps are secured.
• Lay the assembly face down. Insert two
screws into the arch and tighten.
Arch
Large
Support
p
p
p
p
Mat
Straps
Screws
3
4
5
6
7

4
Care
• The mat is machine washable.
Wash separately in cold water on
the gentle cycle. Do not use bleach.
Tumble dry on low.
• The frame and toys can be wiped
with a clean, damp cloth. Do not
immerse the frame.
PRINTED IN CHINA W9898a-0726
©2012 Mattel. All Rights Reserved.
Great Britain: Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628
500303. www.service.mattel.com/uk.
Mattel Europa B.V., Gondel 1, 1186
MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd.,
658 Church Street, Locked Bag #870,
Richmond, Victoria 3121 Australia.
Consumer Advisory Service
1300 135 312.
New Zealand: 16-18 William Pickering
Drive, Albany 1331, Auckland.
Asia: Mattel East Asia Ltd, Room
1106, South Tower, World Finance
Centre, Harbour City, Tsimshatsui,
HK, China.
Malaysia: Diimport & Diedarkan Oleh:
Mattel SEA Ptd Ltd. (993532-P) Lot
13.5, 13th Floor, Menara Lien Hoe,
Persiaran Tropicana Golf Country
Resort, 47410 Tel: [phone],
Fax: [phone].
Consumer Information

5
Battery
Replacement
Battery Safety
Information
In exceptional circumstances,
batteries may leak fluids that can
cause a chemical burn injury or ruin
your product. To avoid battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the
battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
1,5V x 2
"AA" (LR6)
For best performance, we recommend
replacing the batteries that came
with this toy with two, new "AA"
(LR6) alkaline batteries.
• Locate the battery compartment
door on the back of the arch.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver and remove it.
• Remove the exhausted batteries and
dispose of them properly. Insert two,
new "AA" (LR6) alkaline batteries.
• Replace the battery compartment
door and tighten the screws.
Do not over-tighten.
• If this product begins to operate
erratically, you may need to reset
the electronics. Slide the power/
volume switch off and then back on.
• When sounds or lights become
faint or stop, it’s time for an adult
to change the batteries.
• Protect the environment
by not disposing of this
product with household
waste (2002/96/EC). Check
your local authority for
recycling advice and facilities.

6
StorageMusical Fun!
WARNING
To prevent entanglement
injury, never place the gym
in a crib or playpen. Never
add strings, ties or other
products to the gym.
• Slide the power/volume switch on
the arch to ON with low volume
or ON with high volume .
• Pull the centre toy on the arch for
music and lights!
• When you are finished playing with
this toy, slide the power/volume
switch OFF .
• Press the button on top of the large
support and push toward the arch.
Power/Volume Switch
PRESS
PULL