Fisher-Price IncrediBlock G2974 User manual

w
w
w.
fi
s
he
r
-p
r
i
c
e
.
c
o
m
G2974
Instructions
IncrediBlock™
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three LR14 ("C") alkaline batteries (not included).
Adult assembly is required.
Tool required for battery installation: Phillips screwdriver (not included).
™

Battery Safety Information
Batteries may leak fluids that can cause a chemical burn injury or ruin your
toy. To avoid battery leakage:
•Do not mix old and new batteries or batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable (nickel-cadmium).
•Insert batteries as indicated on the battery compartment door.
•Remove batteries during long periods of non-use. Always remove exhausted
batteries from the toy. Dispose of batteries safely. Do not dispose of batteries
in a fire. The batteries may explode or leak.
•Never short-circuit the battery terminals.
•Use only batteries of the same or equivalent type, as recommended.
•Do not charge non-rechargeable batteries.
•Remove rechargeable batteries from the toy before charging.
•If removable, rechargeable batteries are used, they are only to be charged
under adult supervision.
1.5V x 3
LR14 ("C")
Shown Actual Size
•Locate the battery compartment on the bottom of the toy.
•Loosen the screws in the battery compartment door with a Phillips screwdriver.
Remove the battery compartment door.
•Insert three LR14 ("C") alkaline batteries.
Hint: We recommend using alkaline batteries for longer life.
•Replace the battery compartment door and tighten the screws with a Phillips
screwdriver. Do not over-tighten.
•When sounds, or motions from this toy become faint or stop, it’s time for an
adult to change the batteries!
Battery Installation
Battery
Compartment
Door
PRINTED IN ITALY G2974a-0726
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2004 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.

Five Sides of Busy Play!
•Locate the power/volume switch on the bottom of the toy.
•Slide the switch to the desired position: off ,on with low volume or
on with high volume .
•When your child is finished playing with the toy, slide the power/volume switch
to the off position.
•Place any of the eight special blocks upright in the centre of the carousel
and press down. Hear about what’s inside of each block followed by a fun
sound effect!
Note: The block recognition feature only works with the eight blocks
included with this toy. Using other Peek-a-Blocks™produces only a
sound effect.
•Press the action button to hear a fun tune and see the carousel spin around
with flashing lights.
Power/Volume Switch
(on bottom of toy)
Spin & Learn
Press the button
for spinning action
and lively music.

Five Sides of Busy Play!
•Drop blocks into each of the three channels to hear a song or a fun
sound effect.
•Press the lever and watch the blocks spill out!
Stack & Spill
PRESS
•Drop the blocks through the top and watch them tumble.
Drop & Tumble

Five Sides of Busy Play!
•Baby can drop the blocks through the side openings.
•Store up to 30 Peek-a-Blocks™ (only eight included with this toy) inside the
large compartment.
Sort & Store
OPEN
•This side features bold patterns, fun animals and a large mirror.
•Plug blocks into either of the square openings.
Plug & Play

Decoration
•Wipe this toy with a clean cloth dampened with a mild soap and water solution.
•Do not immerse this toy.
Questions? We'd like to hear from you!
Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB.
Helpline: 01628 500302.
Consumer Information
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
20
16
19
15
3
5
12
2
17
21
6
9
13
7
11
14
18
4
10
81
•Apply the labels as shown in the illustration.
•For best results, wash your hands before applying the labels and make sure the
areas to which the labels will be applied are clean and dry. Avoid repositioning
a label once it has been applied.
Care