Fisher-Price J2462 User manual

J2462
www.fisher-price.com
Please keep this instruction sheet for future reference, as it contains important information.
Requires three “AAA” batteries (included) for operation.
Adult assembly is required for battery replacement.
Tool required for battery replacement: Phillips screwdriver (not included).

1,5V x 3
“AAA” (LR03)
For best performance, we recommend
replacing the batteries that came with this
toy with three, new “AAA” (LR03) alkaline
batteries.
• Locate the battery compartment door on
the bottom of the toy.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Remove the exhausted batteries and
throw them away.
• Insert three, new “AAA” (LR03) alkaline
batteries, as indicated inside the battery
compartment.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• If this toy begins to operate erratically
you may need to reset the electronics.
Slide the power/mode switch off and
then back on.
• When sounds from this toy become faint
or stop, it’s time for an adult to change
the batteries.
Battery Replacement Battery Safety Information
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid battery
leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
2

• Locate the power/
mode switch on the
top of the toy.
• Slide the power/
mode switch to
learning mode
or music mode.
• When your child is
finished playing, slide
the power/mode
switch OFF.
Press the nose
Learning Mode
• Press the pig’s nose to hear a fun song or
sound effect.
• Drop “coins” in the slot to hear them
counted as well as fun music and sound
effects.
• Open and close the door to learn “open”
and “close.”
Music Mode
• Press the pig’s nose to hear a fun song or
sound effect.
• Drop “coins” in the slot to hear sound
effects and a short ditty.
•
Open and close the door to to hear more
fun sound effects.
Open and close the door
Drop coins in here
• Slide the volume
switch under the toy
to high or low
volume.
Two Interactive Play Modes!
Mode Switch
Volume Switch
123
3

Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. J2462a-0920
©2010 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA
Consumer Information
Care
•
Wipe this toy with a clean cloth dampened
with a mild soap and water solution.
Do
not immerse this toy.
CO
N
S
UMER
ASS
I
S
T
A
N
C
E
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
ICES-003
• This Class B digital apparatus complies
with Canadian ICES-003.
• Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
NMB-003
• Cet appareil numérique de la classe
B est conforme à la norme NMB-003
du Canada.
• L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes : (1) il
ne doit pas produire de brouillage et (2)
l’utilisateur du dispositif doit être prêt à
accepter tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible
de compromettre le fonctionnement
du dispositif.
• Protect the environment by not
disposing of this product with
household waste (2002/96/
EC). Check your local authority
for recycling advice and facilities
(Europe only).
FCC Statement (United States Only)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and
used in accordance with the
instructions, may cause harmful
interference
to radio communications. However, there
is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
•
Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.