Fisher-Price STRIDE-TO-RIDE WALKER 73499 User manual

www.fisher-price.com
73499
Stride-to-Ride Walker™
™
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “AA” batteries (included).
Adult assembly is required.
Tool required for assembly:
Phillips screwdriver (not included).

2
Base
2 Caster Wheels
Wheel Assembly
Basket
Parts
3 Balls
Backboard
Shown Actual Size
#8 x 1/2" (1,3 cm) Screw – 4

• Place the base upside down on a flat surface.
• Fit the wheel assembly onto the pegs on the base,
as shown
• Insert four #8 x 1/2" (1,3 cm) screws through the holes in
the wheel assembly and into the pegs on the base.
Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
Wheel
Assembly
• Insert and “snap” the caster wheels into the base,
as shown. This may require some force.
• Turn the base over.
1
2
3
Assembly
Caster
Wheels
Base
CAUTION
This product contains small parts in
its unassembled state.
Adult assembly is required.
Bottom View
Bottom View
Pegs
Pegs

• Insert and “snap” the backboard posts into the large
slots in the topside of the base.
Hint: You may need to rock the backboard to secure it
properly into the base.
One time assembly is now complete.
4
Assembly
Backboard
Posts
• Insert and “snap” the basket tabs into the small slots in
the topside of the base.
3
Basket
Tabs
Base
Small Slots
Base
Large Slots
PRINTED IN CHINA
73499b-0920
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.

For best performance, we recommend replacing the
batteries that came with this toy with three, new
alkaline “AA” (LR6) batteries.
• Locate the battery compartment on the backboard.
• Loosen the screws in the battery compartment door
with a Phillips screwdriver. Remove the battery
compartment door.
• Insert three "AA" (LR6) alkaline batteries, as indicated
inside the battery compartment.
Hint: We recommend using alkaline batteries for longer
battery life.
• Replace the battery compartment door and tighten the
screws with a Phillips screwdriver. Do not over-tighten.
• When lights or sounds from this toy become faint or
stop, it’s time for an adult to change the batteries!
In exceptional circumstances, batteries may leak fluids
that can cause a chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different
types: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the battery
compartment.
• Remove batteries during long periods of non-use.
Always remove exhausted batteries from the product.
Dispose of batteries safely. Do not dispose of product
in a fire. The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product
before charging.
• If removable, rechargeable batteries are used, they are
only to be charged under adult supervision.
Battery
Compartment
Door
Back View
5
1.5V x 3
“AA” (LR6)
SHOWN ACTUAL SIZE
Battery Replacement Battery Safety Information
• Locate the power/volume switch on the backboard.
• The switch has three positions: off O, on with low
volume and on with high volume .
• Slide the switch to off Oposition when the toy is not
in use.
Power/Volume Switch
Power/Volume Switch

To change to Walker mode,follow these steps:
6
2
Bottom View
Press the nose or walk
along for fun music
and dancing lights!
Ball play! Toss the
balls into the hoop.
1
Latch
Bottom View
1
2
Press
Slide
Walker
• Turn the toy over.
Press and slide the
latch to an open
position, as shown.
• Spread the seat
halves until they
“click” in place.
Turn the toy over.
It is now ready to
be used as a walker.

7
Press the nose or roll
along for fun music
and dancing lights!
Ball play! Toss the
balls into the hoop.
1
PRESS
• Slide the latch to
a closed position.
It should “click”
into place.Turn the
toy over. It is now
ready to be used
as a ride-on.
2
Latch
Bottom View
Top View
Ride-On
• Press the button
and hold it while
closing the seat
halves. Turn the
toy over.
To change to Ride-On mode, follow these steps:

• Wipe this toy with a clean cloth dampened with a mild
soap and water solution. Do not immerse this toy.
• This toy has no consumer serviceable parts. Do not
take this toy apart.
• Do not drop this toy on a hard surface.
Care
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
Note: Changes or modifications not expressly approved
by the manufacturer responsible for compliance could void
the user's authority to operate the equipment.
FCC Statement
(United States Only)
Consumer Information
8
For countries outside the United States:
CANADA: Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB.
Helpline: 01628 500303; www.service.mattel.com/uk
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870,
Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre,
Harbour City, Tsimshatsui, HK, China.
Visit us on line at www.service.fisher-price.com.
Call Fisher-Price®Consumer Relations, toll-free at
1-800-432-5437,8 AM - 6 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470.
Write to us at: Fisher-Price®Consumer Relations,
636 Girard Avenue, East Aurora, New York 14052.