Fisher-Price JEEP 74450 Guide

WE’VE MADE A CHANGE!
13
• Insert a #8 x 4" screw through the front of the brushguard.
• Fit a spacer tube onto the pointed end of the screw.
• Fit a washer onto the pointed end of the screw.
• Insert the screw tip into the hole in the grille.
• Tighten the screw with a Phillips screwdriver. Do not over-tighten.
• Repeat this procedure to assemble the other side of the brushguard
and the remaining spacer tube to the grille.
#8 x 4" Screw – 2
Shown Actual Size
Spacer Tube
Washers
16
Washer – 2
Shown Actual Size
These instructions replace
Assembly Step 13 in your Owner’s
Manual. Please refer to the
following instructions to complete
Assembly Step 13.
Jeep®Enforcer™
Model 74460
Jeep®Adventure Team
Model 74450
These instructions replace
Assembly Step 16 in your Owner’s
Manual. Please refer to the
following instructions to complete
Assembly Step 16.
©1996 Fisher-Price, Inc., East Aurora, New York, 14052 74450 1 74450-0921