Fisher-Price K7188 User manual

Press the
buttons for fun
sounds and
music!
fisher-price.com
K7188

2
• Please keep these instructions for
future reference, as they
contain important information.
• Requires three button cell (LR44)
batteries (included) for operation.
• Adult assembly is required for
battery replacement.
• Tool required: Phillips screwdriver
(not included).
• Wipe this toy with a clean, damp
cloth. Do not immerse.
• This toy has no consumer
serviceable parts. Do not take apart.

3
Battery Replacement
1,5V x 3
LR44 or Equivalent

4
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver and remove the door.
• Remove the exhausted batteries and
dispose of them properly.
• Insert three, new button cell (LR44)
alkaline batteries.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment
door and tighten the screw. Do not
over-tighten.
• When sounds from this toy become
faint or stop, it is time for an adult
to change the batteries!

5
• Protect the environment
by not disposing of this
product with household
waste (2002/96/EC).
Check your local
authority for recycling
advice and facilities.
In exceptional circumstances,
batteries may leak fluids that can cause
a chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
Battery Safety Information

6
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the
product. Dispose of batteries safely.
Do not dispose of this product in
a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery
terminals.
©2012 Mattel. All Rights Reserved.
PRINTED IN CHINA K7188b-0920

7
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be
charged under adult supervision.

8
CO
N
SU
MER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.

9
ICES-003
This Class B digital apparatus
complies with Canadian ICES-003.
Operation is subject to the following
two conditions: (1) this device may
not cause harmful interference and
(2) this device must accept any
interference received, including
interference that may cause
undesired operation.
NMB-003
Cet appareil numérique de la classe
B est conforme à la norme NMB-
003 du Canada. L’utilisation de ce
dispositif est autorisée seulement aux
conditions suivantes:

10
FCC Statement (United States Only)
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant
to Part 15 of the FCC Rules. These
limits are designed to provide
reasonable protection against
harmful interference in a residential
installation.
(1) il ne doit pas produire de
brouillage et (2) l’utilisateur du
dispositif doit être prêt à accepter
tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible
de compromettre le fonctionnement
du dispositif.

11
This equipment generates, uses and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.

12
• Increase the separation between
the equipment and receiver.
• Consult the dealer or an
experienced radio/TV technician
for help.
Note: Changes or modifications
not expressly approved by the
manufacturer responsible for
compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
This device may not cause harmful
interference and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.