Fisher-Price M5384 User manual

M5384
www.fisher-price.com
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “AA” batteries (included).
Adult assembly is required for battery replacement.
Tool needed for battery replacement:
Phillips screwdriver (not included).
This product contains a magnet. Do not use around items
that are sensitive to or affected by magnetic fields.

United States Only
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced radio/
TV technician for help.
Note: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user's authority to
operate the equipment.
• This device complies with Part 15 of the
FCC Rules.
• Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
Consumer
Information
FCC
Statement
2
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. M5384pr-0920
©2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA

3
• Wipe this toy with a clean cloth dampened
with a mild soap and water solution. Do
not immerse this toy.
• This toy has no consumer serviceable
parts. Please do not take this toy apart.
• To avoid damage to the drawing screen:
- Use only the magnetic pen.
- Do not use regular pencils, pens,
crayons or markers.
- Keep this toy away from extreme
heat sources such as ovens, heaters
and radiators.
• Do not apply heavy pressure or force to
the drawing screen. Heavy pressure is not
necessary and could damage the drawing
screen. A light touch makes a dark line.
CAUTION
• A plastic tab is attached to the toy for
in-store demonstration purposes. While
the tab may have already been removed,
check the side of the toy to be sure. If the
plastic tab is still attached, pull and remove
the tab from the toy. Throw the plastic tab
away.
• Before first-time use, completely darken
the drawing screen with the magnetic pen.
Slide the easy slide eraser from side to
side to clear the drawing screen. Repeat
this procedure several times to enable
the drawing screen to create the clearest,
darkest images.
Please keep small parts such
as plastic tabs out of
children’s reach. Throw the
plastic tab away.
Before
First-Time Use
Care

4
For best performance, we recommend
replacing the batteries that came with
this toy with three, new “AA” (LR6)
alkaline batteries.
• Locate the battery compartment on the
bottom of the toy.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door. Remove the
batteries and throw them away.
• Insert three “AA” (LR6) alkaline batteries, as
indicated inside the battery compartment.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• When sounds or lights from this toy
become faint or stop, it's time for an
adult to change the batteries!
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
1.5V x 3
"AA" (LR6)
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities
(Europe only).
Battery
Replacement
Battery Safety
Information

5 6
7 Modes of Learning
• Slide the mode switch to choose a mode.
• Use the easy slide eraser to move the drawing screen on top of the light-up screen. Trace
letters on the drawing screen with the magnetic pen. Slide the easy slide eraser back and
forth to erase the drawing screen.
• Or, slide the easy slide eraser to move the drawing screen away from the light-up screen.
Then, put a piece of paper on top of the light-up screen to trace letters with a marker
or crayon!
Phonics
• Press a letter on the keypad to hear the letter, the
letter sound and a word that starts with the letter.
• Look at the light-up screen to see the letter.
Uppercase Letters
Lowercase Letters
• Press a letter on the keypad to hear the letter.
• Write the letter as the lights guide you. Lights
disappear after you write the letter to show you
how you did.
Numbers
• Press a number on the keypad to hear the number.
• Write the number as the lights guide you. Lights
disappear after you write the number to show you
how you did.
Letter Hunt
• Look at the light-up screen and listen carefully for
the letter you need to find. Press the button on the
keypad when you find it!
Number Count
• Press a number on the keypad and count the dots
on the light-up screen.
Sing Along
• Sing along to one of four different ABC or
counting songs.
• Press a button on the keypad at any time to hear
a musical note.
A Desk Full of Learning Fun!
Keypad Slide the power/volume
switch to on with low
volume , on with high
volume or off .
Easy Slide
Eraser
Magnetic
Pen
Mode
Switch
Light-up
Screen
Drawing
Screen