Fisher-Price M9970 User manual

Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “D” (LR20) alkaline batteries
(not included) for operation.
Adult assembly is required.
Tool required for assembly:
Phillips screwdriver (not included).
www.fisher-price.com
M9970

2
WARNING
Prevent Entanglement Injury
• Keep out of baby’s reach.
• Remove mobile portion of product from crib or playpen when baby
begins to push up on hands and knees.
• This product may not attach to all crib designs. Do not add additional
strings or straps to attach to crib or playpen.
Consumer Information
• The mobile portion of this product may be used from birth until 5 months.
• The base portion of product may be used from birth until 36 months.
• A crib mobile is intended for visual stimulation and is not to be grasped by a child.
• Always attach with all provided fasteners tightly to a crib or playpen according to the
instructions. Check frequently.
• Wipe this toy with a clean cloth dampened with a mild soap and water solution. Do not
immerse this toy.
• This toy has no consumer serviceable parts. Do not take this toy apart.
ICES-003
This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NMB-003
Cet appareil numérique de la classe Best conforme à la norme NMB-003 du Canada.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit
pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout
brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le
fonctionnement du dispositif.

3
Parts
Base
Mobile Hub
3 Soft Toys
Note: All of the screws used to assemble
this toy are attached to the product. Follow
these instructions carefully to fully secure the
screws. Tighten and loosen all screws with a
Phillips screwdriver. Do not over-tighten.
3 Small Leaf Spokes
Arm
3 Large Leaf Spokes
Crib Adaptor

4
• Protect the environment by not disposing of this product with household waste
(2002/96/EC). Check your local authority for recycling advice and facilities
(Europe only).
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely. Do not dispose of product in a fire.
The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged under
adult supervision.
Battery Safety Information
• Locate the battery compartment on the back of the base.
• Loosen the screws in the battery compartment door and lift to remove it.
• Insert three “D” (LR20) alkaline batteries.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screws.
• If this product begins to operate erratically you may need to reset the electronics. Slide
the power/volume switch off and then back on.
• When lights or sounds become faint or stop, it's time for an adult to change the batteries.
Battery Installation
1.5V x 3
“D” (LR20)

5
Assembly for Crib Use
Crib Adaptor
• Fit the crib adaptor to the base.
IMPORTANT! Make sure the straps are over the top of the crib adaptor.
• Tighten both screws in the crib adaptor.
• First press the button next to the socket and then slide the
socket door open .
• Fit the arm into the socket in the base.
• Tighten both screws in the arm.
Base
2
1
Arm
Base
Socket
SLIDE
SLIDE
PRESS
PRESS

6
Assembly for Crib Use
• Fit the end of the arm to the socket on the mobile hub.
• Tighten both screws in the arm to secure the mobile hub.
Mobile Hub
3
Large Leaf Spoke
4
• Attach a large leaf spoke to the mobile hub, as shown.
• Tighten the screw with a Phillips screwdriver.
• Repeat this procedure to attach the remaining large leaf spokes to the mobile hub.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. M9970a-0920
©2008 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA

7
Assembly for Crib Use
• Fit the string on a soft toy through the slot in the end of a large leaf spoke. Pull down
gently on the soft toy to secure the string in the large leaf spoke.
• Repeat this procedure to attach the remaining soft toys to the other two large leaf spokes.
6
Small Leaf Spoke
5
• Insert a small leaf spoke into a hole in the mobile hub.
• Push to "snap" the small leaf spoke in place.
• Repeat this procedure to attach the remaining small leaf spokes to the mobile hub.

8
Crib Attachment
Base Crib Top Rail
• Position the base so that the decorated side faces inside the crib.
• Fit the base onto the crib top rail.
• Make sure the top strap is hanging over the crib top rail. Pull the bottom strap through
the crib rails.
• Buckle the straps. Make sure you hear a "click".
1
• Make sure the straps are tightened securely around the crib rail.
• While pushing the tab at the bottom of the buckle, pull the free end of the strap to tighten
on the rail. To loosen the strap for removal, simply pull the buckle down.
Hint: You can secure the free end of the strap to the base.
Buckle
BuckleBuckle
2

9
• Tie the base strings to a crib spindle.
Note: It is better to tie the strings in a knot than a bow, since a bow may be easily untied.
3
Crib Attachment
At Least 7 Inches
At Least 7 Inches
Mattress
Mattress
Bottom of Base
Bottom of Base
• If the distance between the base and the mattress is less than 7 inches (18 cm), lower
the crib mattress.
4

10
Classical Music, Soothing Lullabies and Dancing Lights
Smart Response™System
• The Smart Response™system activates lights and music when baby cries. Turn the dial
to adjust the level of sensitivity on the response system.
• Turn the dial to high sensitivity for incoming sounds (listens for shallow sounds) or
low sensitivity for incoming sounds (listens only for loud sounds).
Hint: We recommend that you start with the high sensitivity setting at first.
Power/Volume Switch
Power/Volume Switch
Slide the switch to on with
low volume or on with high
volume . When finished using the
product, slide the switch off .
Lights Control Button
Lights Control Button
Set the power/volume switch on.
Press this button to turn the
soothing night light on. Press again
to turn the night light off.
Mode Select Switch
Mode Select Switch
Slide the switch to select a mode:
Music and motion
Music only
Music Select Buttons
Music Select Buttons
Choose music from
Beethoven, Mozart or
soothing lullabies.
Smart Response
Smart Response
™
™
Dial
Dial
Turn to adjust the level of
sensitivity to sounds.

11
Convert to a Night Light
Remove the mobile and use as a music box with a night light!
• Loosen both screws in the arm near
the base.
• Lift and remove the arm from the base.
• Close the small door on top of the base.
Store the mobile in a safe place for
future use.

12
FCC Statement (United States Only)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Consumer Information