Fisher-Price Snuggle-Kins K9702 User manual

K9702
www.fisher-price.com
Animal babies sold separately
and subject to availability.
TM

Parts
Seat
Handle
3 Supports
#6 x 1/2" Screw - 8
Shown Actual Size
Note: Tighten or loosen all
screws with a Phillips screwdriver.
Do not over-tighten the screws.
Front Brace
Tray
2 Frames
Visit us on line at
www.service.fisher-price.com
Call Fisher-Price®Consumer Relations,
toll-free at 1-800-432-5437, 9 AM - 7 PM
Monday through Friday and 11 AM - 5 PM
Saturday. Hearing-impaired consumers
using TTY/TDD equipment, please call
1-800-382-7470. Write to us at:
Fisher-Price®Consumer Relations,
636 Girard Avenue, East Aurora,
New York 14052.
Consumer Information
• Please keep this instruction sheet
for future reference, as it contains
important information.
• Adult assembly is required.
• Requires three "AA" (LR6) alkaline
batteries (not included).
• Tool required for assembly: Phillips
screwdriver (not included).
For countries outside the United States:
CANADA Questions? 1-800-432-5437. Mattel Canada Inc.,
6155 Freemont Blvd., Mississauga, Ontario L5R 3W2;
www.service.mattel.com.
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303;
www.service.mattel.com/uk.
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond,Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive,
Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower,
World Finance Centre, Harbour City, Tsimshatsui, HK, China.

Battery Installation
• Locate the battery compartment on
the handle.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert three "AA" (LR6) alkaline
batteries, as indicated inside the
battery compartment.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screw.
• When sounds become faint or stop, it’s
time for an adult to change the batteries!
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities
(Europe only).
1.5V x 3
"AA" (LR6)
In exceptional circumstances, batteries
may leak fluids that can cause a
chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
Battery Safety Information

Assembly
• Slide the three supports into the tunnels
in the seat, as shown.
1
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. K9702pr-0920
© 2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA
Supports
• Position a frame on a flat surface.
• Fit the ends of the supports into the
openings in the frame.
2
Frame
• Fit the tray and front brace into the slots
in the frame.
3
Front Brace
• Fit the remaining frame onto the
supports, tray and front brace.
4
Frame
Tray
This package contains small
parts. For adult assembly only.
CAUTION

Assembly
• Insert four screws into the frame and
front base and tighten.
• While holding the stroller together, turn it
over. Insert the four remaining screws into
the frame on the other side and tighten.
5
• Turn the stroller upright.
• "Snap" the ends of the canopy support
into each side of the stroller.
6
• "Snap" the handle into the slots in the
top of the stroller.
7
Handle
Canopy
Support Ends

Take "Baby" for a Stroll!
United States Only
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harm-
ful interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interfer-
ence to radio communications. However,
there is no guarantee that interference will
not occur in a particular installation.If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user's authority to operate the equipment.
• Wipe with a clean cloth dampened
with a mild soap and water solution.
Do not immerse.
Care
FCC Statement
• FOR DOLL ONLY. NOT INTENDED FOR
CHILD USE.
• Slide the power switch on the handle
on .
• Push the heart button to hear fun tunes.
• When you are finished playing with this
toy, slide the power switch off .