Fisher-Price MYTOONTV P6798 User manual

MyToonTV
MyToonTV
P6798

MyToonTV
2
MyToonTV
It's Fun and Easy!
Turn yourself into a rock ‘n roll robot, make your dad a dancing dog, picture your sister
as a pirouetting princess, and more! With My Toon TV, it’s fun and easy to turn yourself,
your friends and your family into 11 different hilarious dancing cartoon characters to sing,
dance and perform with—on TV!
TV not included. Image clarity may vary from package depiction.
Light-up microphone remote does not amplify or transmit voice.

MMyToonToonTVTV
MyToonTV
3
Consumer Information
NOTICE ABOUT EPILEPSY AND SEIZURES
PLEASE READ THIS NOTICE BEFORE YOU
OR YOUR CHILD USE ANY VIDEO GAME.
A very small portion of the population
has a condition, which may cause
a momentary loss of consciousness
when viewing certain kinds of flashing
lights or patterns that are commonly
present in our daily environment. This
condition may cause seizures while
watching some kinds of television
pictures or playing certain video games.
Players who have not had any previous
seizures may nonetheless have an
undetected epileptic condition.
If you or anyone in your family has
experienced symptoms linked to an
epileptic condition (e.g. a seizure or loss of
awareness), consult your physician before
playing video games. We recommend that
parents observe their children while they
play video games. If you or your child
experience any of the following symptoms
such as dizziness, altered vision, eye or
muscle twitching, involuntary movements,
loss of awareness, disorientation or
convulsions, DISCONTINUE USE
IMMEDIATELY and consult your physician.
Additionally, please follow these
precautions whenever playing
a video game:
• Do not sit or stand too close to the
television screen. Play as far back from
the screen as possible.
• Do not play if you are tired or
need sleep.
• Always play in a well lit room.
• Be sure to take a 10-15 minute break
every hour while playing.
Notes
• Please keep this instruction sheet for future,
as it contains important information.
• Adult assembly is required for setup and
battery installation.
• Requires four “AA” (LR6) and three “AAA”
(LR03) alkaline batteries (batteries not
included) for operation.
• Tool required for battery installation:
Phillips screwdriver (not included).
• Bright sunlight or incandescent light may
affect the range between the remote and
the base. Try dimming the light in the
room you are using this toy.
Care
• Wipe this product with a clean cloth
dampened with a mild soap and water
solution. Do not immerse this product.
• This product has no consumer
serviceable parts. Do not take this
product apart.

MyToonTV
4
MyToonTV
External Music Input Cord - Plug in to
your own CD or MP3 Player to listen
and dance to your own music!
Music Buttons - Press the green arrow
buttons to move forward or backward
through song choices included with
this toy. Press the pause/play button
to listen to your choice.
Camera - Stand in front of the camera
to see yourself on TV.
Power Button - Press to turn power ON;
press again to turn power OFF.
Features
Base
Base
On-Screen
On-Screen
Selection Buttons
Selection Buttons
Power L.E.D
Power L.E.D
Music Buttons
Music Buttons
Power Button
Power Button
Plug-and-Play Cord
Power L.E.D. - Lights when power
is ON.
Mode Dial - Turn to select a mode:
Quick Start, Camera, Customize Your
Character or Dance.
Plug-and-Play Cord - Plugs in to
your TV.
On-Screen Selection Buttons - Press
the yellow arrow buttons to scroll
through choices; press the star button
to make selections or take a picture.
External Music
External Music
Input Cord
Input Cord
Mode DialCamera

MMyToonToonTVTV
MyToonTV
5
Features
On-Screen Selection Buttons - Press
the yellow arrow buttons to scroll
through choices; press the star button
to make selections or take a picture.
Light Show Button - Press for
flashing lights!
On-Screen
On-Screen
Selection Buttons
Selection Buttons
Light Show Button
Remote
Remote

MyToonTV
6
MyToonTV
Battery Installation
Hint: We recommend using alkaline batteries for longer battery life.
Base
• Locate the battery compartment on the
bottom of the base.
• Loosen the screws in the battery
compartment door, and remove the door.
• Insert four “AA” (LR6) alkaline batteries.
• Replace the battery compartment
door and tighten the screws. Do not
over-tighten.
• If the base begins to operate erratically,
you may need to reset the electronics.
Press the power button to turn power
off; press again to turn power back on.
• When function is slow or stops or you
see a low battery indicator on
your TV screen, it’s time for an adult
to change the batteries.
Remote
• Locate the battery compartment
on the back of the remote.
• Loosen the screw in the battery
compartment door, and remove
the door.
• Insert three “AAA” (LR03)
alkaline batteries.
• Replace the battery compartment
door and tighten the screw. Do not
over-tighten.
• If this remote begins to operate
erratically, you may need to reset
the electronics. Remove and
replace the batteries.
• When lights on the remote stop, or
the range between the remote and
base decreases, it's time for an
adult to change the batteries.
1.5V x 4
“AA” (LR6)
1.5V x 3
“AAA” (LR03)

MMyToonToonTVTV
MyToonTV
7
Battery Safety Information
In exceptional circumstances, batteries
may leak fluids that can cause
a chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision

MyToonTV
8
MyToonTV
Connecting to Your TV
INPUT
AUDIO IN
LEFT
RIGHT
VIDEO IN
White
Red
Yellow
IMPORTANT! Your TV, VCR or DVD
player must have audio and video
input jacks.
• Place the base next to your TV, or at
eye level with your child.
IMPORTANT! Do not place the base on
top of your TV. Keep excess cable off the
floor and out of the way.
• Locate the plug-and-play cord on
the base.
• Plug the audio-video pins into the
matching colored input jacks on your
TV, VCR or DVD player (Yellow for Video
In, White for Left Audio In and Red for
Right Audio In).
Hint: We've included a detailed
illustration to show how to connect the
base to a TV or TV and VCR/DVD player.
Please refer to page 14.
• Turn your TV, VCR or DVD player
power ON.
• Press the power button on the base to
turn it ON.
• To find the picture on your TV screen,
set your TV’s, VCR’s or DVD player’s
mode selector to INPUT or VIDEO IN.
• Have your child stand three to five feet
(1m – 1.5m) away from the base unit.
Hint: The images on the TV screen
appear best when there is good lighting
in the room. Make sure the light source
is in front of or above your child.
• Keep the remote out of direct sunlight.

MMyToonToonTVTV
MyToonTV
9
Camera
• Turn the mode dial to Camera .
• Press the yellow arrow buttons
on the base or remote to find a face
frame to customize. Look for the face
frame with a question mark.
Hint: For first-time use, all six face
frames are blank.
• Press the select button on the base
or remote to select a face frame.
Quick Start
• Turn the mode dial to Quick Start
Mode .
• Watch as the curtains open and
a character appears!
• Stand about five feet (1.5m) from
the camera.
• Adjust the camera angle to see yourself
dance with the character on screen.
• Press the green backward or forward
music buttons on the base to scroll
through song choices included with
this toy.
• Press the play/pause button on the
base to pause the music and watch the
character dance. Press the play/pause
button again to turn the music back on.
• Press the select button on the
base or remote to pause the character’s
movement. The character will stand
and wait until you press the select
button again.
• Press the yellow arrow buttons
on the base or remote to dance with
a different character.

MyToonTV
10
MyToonTV
• Stand approximately three feet (1m) from
the camera.
• Next, adjust the camera lens and your
distance from the base until your face
aligns with the face on screen.
• Then, press the select button to
take the picture.
• Repeat this process to take more pictures
and fill the other face frames.
Hint: If all six frames are filled or you
want to retake a picture, select the
picture you want to save over and
follow this process. If you'd like to delete
all six pictures at once, simply press
and hold the green backward , green
forward music and right yellow arrow
buttons on the base at the same time
until you hear a tone.
Camera
• Turn the mode dial to Customize Your
Character .
• Press the yellow arrow buttons
on the base or remote to scroll through
character choices.
Hint: The range of the remote is up to
15 feet in this mode.
• Press the select button on the base
or remote to select a character.
• Then, press the yellow arrow buttons
on the base or remote to scroll
through faces.
• Press the select button on the base or
remote to select a face for the character.
• Repeat this process to customize more
characters (there are 11 in all)!
Customize Your Character