Fisher-Price Press & Go C0129 Manual

w
w
w.
fi
s
he
r
-p
r
i
c
e
.
c
o
m
C0129, C6517
Instructions
Press & Go™Train
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three "AA" batteries (included).
Adult assembly is required for battery replacement.
Tool required for battery replacement:
Phillips screwdriver (not included).

2
All Aboard!
•Locate the power/volume switch on the bottom of the toy.
•Slide the switch to the desired position: off ; on with low volume ; or on
with high volume .
•Press the smokestack and the train moves along with lights and fun music.
•Place a block on the center car for spinning action, lights and music.
•When your child is finished playing with this toy, slide the power/volume
switch to the off position.
Note: If an obstacle blocks the train’s movement, you may hear a clicking
sound. This is normal and will not damage the toy.
PRESS
Before First Time Use
Please keep small parts such as the plastic tabs out of
children’s reach.Throw the plastic tab away.
CAUTION
Note: A plastic tab was attached to the toy for in-store demonstration purposes.
While the tab may have already been removed, check the bottom of the toy to
be sure. If the plastic tab is still attached, pull and remove the tab from the toy.
Throw the plastic tab away.
Power/Volume Switch

Battery Replacement
3
Battery Safety Information
Batteries may leak fluids that can
cause a chemical burn injury or ruin
your toy. To avoid battery leakage:
•Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or recharge-
able (nickel-cadmium).
•Insert batteries as indicated inside
the battery compartment.
•Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the toy.
Dispose of batteries safely. Do not
dispose of batteries in a fire. The
batteries may explode or leak.
•Never short-circuit the battery
terminals.
•Use only batteries of the same or
equivalent type, as recommended.
•Do not charge non-rechargeable
batteries.
•Remove rechargeable batteries
from the toy before charging.
•If removable, rechargeable batteries
are used, they are only to be
charged under adult supervision.
Battery
Compartment
Door
•Locate the battery compartment door
on the bottom of the train.
•Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
•Remove the exhausted batteries and
throw them away.
•Insert three "AA" (LR6) alkaline
batteries.
Hint: We recommend using alkaline
batteries for longer life.
•Replace the battery compartment
door and tighten the screw with
a Phillips screwdriver. Do not
over-tighten.
•When sounds and motions from this
toy become faint or stop, it’s time for
an adult to change the batteries!
Shown Actual Size
1.5V x 3
"AA" (LR6)
For best performance, we recom-
mend replacing the batteries that
came with this toy with three, new
alkaline “AA” (LR6) batteries.
Bottom View

Questions? We'd like to hear from you!
Call Fisher-Price®Consumer Relations, toll-free at 1-800-432-5437, 8 AM - 6 PM EST
Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470. Or, write to: Fisher-Price®Consumer Relations,
636 Girard Avenue, East Aurora, New York 14052.
For countries outside the United States:
CANADA: Questions? 1-800-567-7724. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500302.
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2004 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA C0129a-0920
Consumer Information
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment.
FCC Note (United States Only)
•Wipe this toy with a clean cloth dampened with a mild soap and water solution
Do not immerse this toy.
•This toy has no consumer serviceable parts. Do not take this toy apart.
Care