Fisher-Price N3570 User manual

www.fisher-price.com
N3570
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “C” (LR14) alkaline batteries (not included).
Adult assembly is required.
Tool required for assembly: Phillips screwdriver
(not included).
Open
close!
On, off

Parts
#6 x 1" (2.5 cm) Screw – 12
Shown Actual Size
Note: Tighten or loosen all screws
with a Phillips screwdriver.
Do not over-tighten the screws.
Kitchen Light
Arch
Oven Base Sink Base
Refrigerator
Countertop
Shape Sorter
Oven Door
Rug
Toaster
2 Oven Walls Oven Rack Pipe
Pan
Spoon
Handle
Faucet
Stove Knob
Flower
2
Parts not shown: 2 Balls, 3 Shape Blocks

Assembly
Oven Wall
Countertop
• Fit the tabs on the oven walls into the slots in the countertop.
• Turn the oven door upright (detail side up) and fit the pegs into
the posts on each side of the oven.
Hint: The oven door is designed to fit one way. If it does not fit,
turn the oven door over and try again.
• Fit the tabs on the oven base into the slots in the sink base.
• Insert two screws into the oven base and tighten.
This product contains small parts for
assembly by an adult. Take extra care
during unpacking and assembly.
CAUTION
Oven Wall
Oven Rack
• Turn the oven rack upside-down (detail side down) and fit it into
the groove in each oven wall.
Hint: The oven rack is designed to fit one way. If it does not fit, turn
the oven rack over and try again.
Oven Door
Oven Base
Sink Base
3
Posts
Grooves
1
2
1
3
4

Assembly
• Fit the base assembly onto the countertop assembly.
• Insert four screws into the base assembly and tighten.
• Insert and "snap" the shape sorter and handle into the front of
the refrigerator.
Hint: This may require extra force.
• Insert and "snap" the faucet, knob and toaster into the
countertop, as shown.
• Turn the assembly upright.
• Insert and "snap" the tabs on the pipe into the slots in the
assembly, under the sink.
Refrigerator
Faucet
Toaster
Knob
Handle
Shape Sorter
4
Base Assembly
Countertop Assembly
Pipe
1
5
1
6
1
7
1
8

Assembly
• Position the main assembly and the refrigerator as shown.
• Fit the rug grooves to the tabs on the base of the main assembly
and the tab on the base of the refrigerator.
Rug
• Position the arch with the shapes facing you. Slide and "snap" the
kitchen light to the arch over the "light bulb".
Hint: The kitchen light is designed to be assembled to the arch one
way. If it doesn't "snap" onto the arch, turn it around and try again.
• Check to be sure the kitchen light is assembled properly by pulling it
down. If you can remove it, please repeat this assembly step.
• Insert and "snap" the flower into the hole in the arch.
Arch
(Shapes Side)
• Insert two screws into the back of the refrigerator, near the clock.
Tighten the screws.
Assembly is now complete.
Flower
Kitchen Light
• Insert four screws into the rug and tighten.
Tabs
5
"Light
Bulb"
Slot
Slot
1
9
1
10
1
11
1
12
• Insert and "snap" the arch into the slot in the top of the
refrigerator and the countertop.
1
13

Battery Installation
• Locate the battery compartment door (burner) on the countertop.
• Loosen the screws in the battery compartment door. Remove the
battery compartment door.
• Insert three “C” (LR14) alkaline batteries, as indicated inside the
battery compartment.
Hint: We recommend using alkaline batteries for longer
battery life.
• Replace the battery compartment door and tighten the screws.
• When lights or sounds from this toy become faint or stop,
it’s time for an adult to change the batteries!
1.5V x 3
“C” (LR14)
Battery Compartment Door
In exceptional circumstances, batteries may leak fluids that can
cause a chemical burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries of different
types: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always
remove exhausted batteries from the product. Dispose of
batteries safely. Do not dispose of this product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to
be charged under adult supervision.
Battery Safety Information
• Protect the environment by not disposing of this product
with household waste (2002/96/EC). Check your local
authority for recycling advice and facilities (Europe only).
6

Learning Time
Learn A-B-C's, 1-2-3's, colors, shapes
and more!
Two Sides of Learning Fun!
7
Musical Fun
Listen to favorite tunes, fun phrases and
silly sounds.
Imagination
Enjoy role play fun along with realistic
sounds in the kitchen.
Fit shape blocks
into the arch
Lift and lower
the faucet
Turn the
dial
Crawl through
the arch
Flip the
switch
to turn
on the
light
Push the
toast
Spin the
roller
Place the pan on the burner Open and close the
refrigerator door
Slide the mode switch to
either Learning
Time, Musical fun,
Imagination or Off.
Adjust the volume to low,
medium or high for
your child's comfort.
Spin the
flower
Turn the
clock hands
Flip the
page
Spin the
fish bowl
Fit shape blocks into
the shape sorter
Drop balls
down the
drain
Open and close
the oven door

Consumer Information
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. N3570pr-0920
©2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN MEXICO
Care
• Wipe this toy with a clean cloth dampened with a mild soap
and water solution. Do not immerse this toy.
• This toy has no consumer serviceable parts. Do not take this
toy apart.
• Before use, thoroughly wash all parts that may contact food.
The pan and spoon are not dishwasher safe.
FCC Statement (United States Only)
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician
for help.
Note: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference and (2) this device must accept any
interference received, including interference that may cause
undesired operation.