Fisher-Price Shake 'n Go Speedway H4088 User manual

H4088
Please keep this instruction sheet for future reference,
as it contains important information.
Requires ten "AA" (LR6) alkaline batteries (not included).
Adult assembly is required.
Tool required for battery installation:
Phillips screwdriver (not included).
This product is not recommended for use
on loose dirt or wet surfaces.
Shake 'n Go Speedway™
™
www.fisher-price.com

Assembly
Part not shown:
2 Cars
Each track piece has a number on the bottom. Simply match the numbers and fit the pieces together!
Hint: For best performance, we suggest assembling the track on a hard, flat surface.
Snap in the start sign.
Fit the guard rails into the
matching holes on the track.
Fit the banner sign
into the matching
holes on the track. Fit the barrels onto
the starting gate.
Fit the banner sign
into the matching
holes on the track.

Battery Installation
• Locate the battery compartment door on the bottom of
each car.
• Loosen the screw in the battery compartment door
with a Phillips screwdriver. Remove the battery
compartment door.
• Insert three "AA" (LR6) alkaline batteries, as indicated
inside the battery compartment of each car.
Hint: We recommend using alkaline batteries for
longer life.
• Replace the battery compartment door and tighten the
screw with a Phillips screwdriver. Do not over-tighten.
• When sounds or motions from the car become faint or
stop, it’s time for an adult to change the batteries!
Shown Actual Size
1.5V x 10
"AA" (LR6)
Battery
Compartment
Door
Bottom View
Race Cars
Start Sign
Battery
Compartment
Door
• Locate the battery compartment on the start sign.
• Loosen the screws in the battery compartment
door with a Phillips screwdriver. Remove the battery
compartment door.
• Insert four "AA" (LR6) alkaline batteries, as indicated
inside the battery compartment.
Hint: We recommend using alkaline batteries for
longer life.
• Replace the battery compartment door and tighten the
screws with a Phillips screwdriver. Do not over-tighten.
• When sounds or lights from start sign become faint or
stop, it’s time for an adult to change the batteries!
• Protect the environment by not disposing of this
product with household waste (2002/96/EC).
Check your local authority for recycling advice
and facilities (Europe only).

Just For Fun!
• Lift the car and shake it to start the "engine" and the
sound effects.
Hint: For maximum distance, shake the car 7 or 8
times. Shaking more than this does not increase the
distance it will travel.
• Set the car on the track and watch it go. Fun sound
effects and lights add to the excitement as you go
around the track.
• When your car stops, pick it up, shake it and set it down
again to restart.
• When you're finished playing, slide the power switches
on the car and the start sign to the off position.
Note: If cars have not driven on the track for a few
minutes, the start sign "goes to sleep" automatically.
Press the reset button on top of the sign to "wake it up."
• Locate the On/Off switch on the side of the start sign.
• Slide the switch to the position to turn the toy on.
Bottom View
• Locate the On/Off switch on the bottom of the car.
• Slide the switch to the position to turn the toy on.
To prevent entanglement,
keep hair away from wheels.
CAUTION
1
2
3
4

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA H4088c-0920
Hint: You can also race your cars on any smooth,
flat surface. Shake the car, set it down and let it go.
It races up to 20 feet!
• Lift the two starting gates on the track.
Race to Win!
• Set your cars on the arrows behind the starting gates.
• Wait for the announcer to give you the go, then hit the
pedal and you're off.
• The anouncer tells you who's in the lead as lights on
the start sign count down the laps of the race.
• When your car stops, pick it up, shake it and set it down
again to rejoin the race.
• When you're finished playing, slide the Power switches
on the car and the start sign to the off position.
Note: If cars have not driven on the track for a few
minutes, the start sign "goes to sleep" automatically.
Press the reset button on top of the sign to "wake it up."
Bottom View
• Locate the On/Off switch on the bottom of the car.
• Slide the switch to the position to turn the toy on.
1
• Locate the On/Off switch on the side of the start sign.
• Slide the switch to the position to turn the toy on.
2
3
• Lift the car and shake it to start the "engine" and the
sound effects.
Hint: For maximum distance, shake the car 7 or 8
times. Shaking more than this does not increase the
distance it will travel.
4
5

For countries outside the United States:
CANADA: Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; www.service.mattel.com.
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303; www.service.mattel.com/uk
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
Consumer Information
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the
user’s authority to operate the equipment.
FCC Statement (United States Only)
• Wipe this toy with a clean cloth dampened with a mild soap and water solution. Do not immerse this toy.
• This toy has no consumer serviceable parts. Do not take this toy apart.
Care
Visit us on-line at www.service.fisher-price.com.
Call Fisher-Price®Consumer Relations, toll-free at 1-800-432-5437, 9 AM- 7 PM EST Monday through Friday and 11 AM - 7 PM
EST Saturday. Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470.
Write to us at: Fisher-Price®Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product.
To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of
batteries safely. Do not dispose of the product in a fire. The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged under adult supervision.