Fisher-Price PLANET HEROES L4810 User manual

1
L4810 M2126
L4810 M2126
theplanetheroes.com
Please keep this instruction sheet for future
reference, as it contains important information.
For proper function of this toy, you must complete
assembly of the nose and landing gear.
Requires four “AA” batteries (included).
Adult assembly is required.
Tool required for battery replacement: Phillips
screwdriver (not included).

2
Assembly
• “Snap” the nose gear, both main landing gear
pieces and the handle to the bottom of the shuttle.

3
Battery
Replacement
• Protect the environment by not disposing
of this product with household waste
(2002/96/EC). Check your local authority
for recycling advice and facilities.
For best performance, we recommend replacing
the batteries that came with this toy with four,
new alkaline “AA” (LR6) batteries.
• Locate the battery compartment on the bottom of
the toy.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door.
• Insert four, new “AA” (LR6) alkaline batteries.
Hint: We recommend using alkaline batteries for
longer battery life.
• Replace the battery compartment door and
tighten the screw.
• If this toy begins to operate erratically, you may
need to reset the electronics. Slide the power
switch off and then back on again.
• When lights, sounds or movement become
faint or stop, it’s time for an adult to change
the batteries!

4
Fisher-Price, Inc., a subsidiary of Mattel, Inc.,
East Aurora, NY 14052 U.S.A.
©2008 Mattel, Inc. All Rights Reserved.
® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA L4810a-0920

5
Saving the
universe from
the forces of
destruction!
• Locate the power switch on the bottom of the toy.
Slide the switch on •.
• Slide the lever on the side of the shuttle or press the
trigger on the handle for turbo takeoff action!
• Press the button on top of the shuttle for laser
sounds and the Planet Heroes™’ theme.
• When you are nished playing with this toy, slide
the power switch off O.
• This product is not recommended for use on
loose dirt or wet surfaces.

6
Saving the
universe from
the forces of
destruction!
• Lift to remove the space pods and hear cool
sound effects.
• Press the pods back in place on the wings for
another mission!
• Press the button on the pod to open the pinchers.
• Press the button on the pod to launch the arrow.
• Only use projectiles supplied with this toy. Do not
launch at people or animals or at point blank range.
• To launch an arrow again, insert the arrow into the
slot in the pod until you hear a “click”.

7
Battery Safety
Information
In exceptional circumstances, batteries may
leak uids that can cause a chemical burn injury
or ruin your toy. To avoid battery leakage:
• Do not mix old and new batteries or batteries of
different types: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery
compartment.
• Remove batteries during long periods of non-use.
Always remove exhausted batteries from the
toy. Dispose of batteries safely. Do not dispose
of the product in a re. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy
before charging.
• If removable, rechargeable batteries are used,
they are only to be charged under adult supervision.
1.5V x 4
“AA” (LR6)

8
FCC Statement
United States Only
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in
a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
Note: Changes or modications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment.
Care
Wipe with a clean cloth dampened with a mild soap
and water solution. Do not immerse.
ICES-003
This Class B digital apparatus complies with
Canadian ICES-003.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.