Fisher-Price Smart Shopper B1504 User manual

B1504
Instructions
Please keep this instruction sheet for future reference, as it contains important information.
Requires three "AA" (LR6) alkaline batteries (not included).
Adult assembly is required.
Tool required for assembly: Short shaft Phillips screwdriver (not included).
Smart Shopper™ Marketplace
w
w
w.
fi
s
he
r
-p
r
i
c
e
.
c
o
m

Parts
Counter Top
Leg
(Labeled with Star)
Leg
(Labeled with Triangle)
Cash Register Base
Cash
Register
Canopy
Canopy Support
(Front and Back)
2 Shelves
2 Bins
Parts Not Shown:
2 Label Sheets
Bunch of Bananas
Bunch of Carrots
Loaf of Bread
Milk Carton
Hot Dog Package
Soup Can
Chicken Leg
Pie
Egg Carton
Jelly Jar
5 Coins
4 Play Money Bills
Credit Card
2
#8 x 1/2" Screw - 6 #8 x 3/4" Screw - 10
Scale
Basket
Note: Tighten and loosen all screws with a short shaft
Phillips screwdriver. Do not over-tighten screws.
Both Shown Actual Size

Battery Installation
SHOWN ACTUAL SIZE
1.5V x 3
"AA" (LR6)
Hint: We recommend using alkaline batteries for longer
battery life.
• Locate the battery compartment on the back of the
cash register.
• Loosen the screw in the battery compartment door.
• Insert three, new "AA" (LR6) alkaline batteries.
• Replace the battery compartment door and tighten
the screw.
Hint: To replace batteries, you will need to remove the cash
register from the cash register base. See hint on page 6.
• When sounds or lights from this toy become faint or stop,
it’s time for an adult to change the batteries!
Hint: If your child is not actively playing with this toy,
it turns off automatically (sleep mode). To turn the toy
back on, press any button on the cash register.
Battery Compartment Door
Battery Safety Information
Batteries may leak fluids that can cause a chemical burn
injury or ruin your toy. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different
types: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of non-use.
Always remove exhausted batteries from the toy.
Dispose of batteries safely.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy
before charging.
• If removable, rechargeable batteries are used,
they are only to be charged under adult supervision.
3

• Fit the canopy support (front) to the canopy support.
1
Canopy
Canopy Support (Front)
Assembly
2
• Fit the canopy support (back) to the canopy support (front).
• Insert two #8 x 1/2" screws into the canopy support (back)
and tighten.
3
• Fit a shelf into either of the two legs. Make sure that the
tab on the shelf fits into the groove in the leg.
• Insert two #8 x 3/4" screws into the outside of leg.
Tighten the screws.
Canopy Support (Back)
#8 x 1/2" Screw - 2
Shelf
Leg
4
• Fit the other shelf to the leg. Make sure the tab on the
shelf fits into the groove in the leg.
• Insert two #8 x 3/4" screws into the outside of the leg.
Tighten the screws.
Leg
#8 x 3/4" Screw - 2
Shelf
CAUTION
This product contains small parts in
its unassembled state.
Adult assembly is required.
#8 x 3/4" Screw - 2
GrooveTab
4

5
• Fit the other leg to the shelves. Make sure the tabs on
the shelves fit into the grooves in the leg.
• Insert four #8 x 3/4" screws into the outside of the leg.
Tighten the screws.
Hint: If you forgot to fit the tabs on the shelves into the
grooves on the legs, it is still possible to do this without
removing the legs. Simply press to “snap” the tabs into
the grooves.
Leg
Shelves
Assembly
6
• Look inside the assembly and note the star on one of
the legs.
• Look underneath the counter top for the star on one end.
• Positon the counter top so the star is over the star on the
leg. Fit the counter top to the assembly.
• Insert two #8 x 3/4" screws into the counter top and tighten.
Counter Top
7
• Turn the assembly upside down. Insert four #8 x 1/2"
screws into the tabs on the legs. Tighten the screws.
Hint: You will need to hold the screwdriver at an angle.
8
• "Snap" the cash register base into the counter top.
Cash
Register
Base
#8 x 3/4" Screw - 2
#8 x 1/2" Screw - 4
#8 x 3/4" Screw - 2
5
Groove Tab
Star
(Underside)
Star
(Inside)

Assembly
9
• "Snap" the canopy assembly into the counter top and
cash register base.
Canopy Assembly
10
Bin
• “Snap” the scale into the counter top.
• Fit the two removable bins into any of the slots on either
the front or back shelf.
• Hang the basket on the hook under either shelf.
Slots
Basket
11
• Fit the cash register into the cash register base, as shown.
Be sure the hooked tab on the back of the cash register
fits into the slot in the cash register base.
• Tighten the two attached screws at the top of the cash
register with a Phillips screwdriver to secure it. Do not
over-tighten.
Hint: You will need to loosen the two screws
to remove the cash register when replacing
batteries.
Cash
Register
Base
Slot
Hooked
Tab
Scale
6
Hook

Label Decoration
• Make sure the areas where the labels will be applied are
clean and dry.
• Apply the labels as shown in the illustrations.
• For best results, avoid repositioning a label once it has
been applied.
1
2
45
6
789
10 (Front and Back)
11 12
3
Let’s Go Shopping!
"Weigh" your food
on a moving scale.
Run items across the
scanner to hear prices.
Touch a picture button to hear
lots of fun facts and phrases.
Press number keys
to hear numbers
identified.
Press to open
the cash
register drawer.
Slide ROM cards
(sold separately)
into the register
slot to learn
new facts about
Marketplace
items.
Care
• Check the plastic parts regularly and if broken or cracked,
dispose of them properly.
• Wipe this toy with a clean cloth dampened with a mild
soap and water solution. Do not immerse this toy.
• This toy has no consumer serviceable parts. Do not take
this toy apart.
(Apply these labels to front and back.)
7

FCC Note (United States Only)
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a resi-
dential installation. This equipment generates, uses and can
radiate radio
frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio o
television reception, which can be determined by turning the
equipment off
and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Note: Changes or modifications not expressly approved by
the manufacturer responsible for compliance could void the
user's authority to operate the equipment.
Consumer Information
Questions? We’d like to hear from you!
Call Fisher-Price®Consumer Relations, toll-free at 1-800-
432-5437, 8 AM - 6 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment,
please call
1-800-382-7470.
Or, write to:
Fisher-Price®Consumer Relations
636 Girard Avenue
East Aurora, New York 14052 U.S.A.
For countries outside the United States:
CANADA
Questions? 1-800-567-7724, Mattel Canada Inc.,
6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
GREAT BRITAIN
Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500302.
AUSTRALIA
Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory
Service 1300 135 312.
NEW ZEALAND
16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA
Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre,
Harbour City, Tsimshatsui, HK, China.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
© 2003 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Printed in Mexico B1504pr-0920