Fisher-Price X7673 User manual

Please keep this instruction sheet for future reference,
as it contains important information.
Requires four AA (LR6) alkaline batteries (included) for operation.
Batteries included are for demonstration purposes only.
Adult assembly required for battery replacement. Tool required: Phillips screwdriver.
Wipe this toy with a clean, damp cloth. Do not immerse.
This toy has no consumer serviceable parts. Do not take apart.
fisher-price.com
X7673

2
CO
N
SU
MER A
SS
I
S
TAN
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
©2013 Mattel. All Rights Reserved.
PRINTED IN CHINA X7673pr-0920
Consumer Information
ICES-003
This Class B digital apparatus complies
with Canadian ICES-003. Operation is
subject to the following two conditions:
(1) this device may not cause harmful
interference and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
NMB-003
Cet appareil numérique de la classe B
est conforme à la norme NMB-003 du
Canada. L’utilisation de ce dispositif
est autorisée seulement aux conditions
suivantes : (1) il ne doit pas produire
de brouillage et (2) l’utilisateur du
dispositif doit être prêt à accepter tout
brouillage radioélectrique reçu, même
si ce brouillage est susceptible de
compromettre le fonctionnement
du dispositif.

3
Battery
Replacement
• For longer life, use alkaline batteries.
• Locate the battery compartment
door on the bottom of the toy.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver and remove the door.
• Remove the exhausted batteries
and dispose properly.
• Insert four new AA (LR6)
alkaline batteries.
• Replace the battery compartment
door and tighten the screws. Do
not over-tighten.
• If this toy begins to operate
erratically, you may need to reset
the electronics. Slide the power
switch off and back on.
• When sounds/motion from this toy
become faint or stop, it’s time for
an adult to change the batteries.
1,5V x 4
AA (LR6)
• Protect the environment
by not disposing of this
product with household
waste (2002/96/EC). Check
your local authority for
recycling advice and facilities.
In exceptional circumstances,
batteries may leak fluids that can
cause a chemical burn injury or ruin
your product. To avoid battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the
product. Dispose of batteries safely.
Do not dispose of this product in
a fire. The batteries inside may
explode or leak.
• Never short-circuit the
battery terminals.
• Use only batteries of the same or
equivalent type as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries
from the product before charging.
• If removable, rechargeable batteries
are used, they are only to be
charged under adult supervision.
Battery Safety
Information

4 5
Roaring Action!
WARNING
Do not aim at eyes
or face. Only use
projectiles supplied
with this toy.
Do not re at point
blank range.
• Remove the defense armor for
classic dino play!
IMPORTANT! The legs are designed
with a clutch if the dinosaur bumps into
an obstacle, or if the feet are not flat on
the floor. Simply remove the obstacle
and rotate the legs so all four feet are
flat on the floor.
• Turn the figure to release spikes on
the defense armor.
Slide the power
switch ON
or OFF .
Press top for
walking and
battle modes
Press
bottom for
battle only
mode
• When you press the top or bottom
button on dino’s back, watch the
defense armor lift into action and the
cannon’s fire!

6
(United States Only)
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more
of the following measures:
• Reorient or relocate the
receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications
not expressly approved by the
manufacturer responsible for
compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
Assembling Legs FCC Statement
Hint: The legs on this toy are
designed to break away.
• If a leg falls off, simply fit the peg
on the leg into the socket on the
dinosaur body.
• Push the leg to “click” into place.
Hint: If more than one leg falls off,
match the number on the leg to the
number near the socket (1, 2, 3 or 4).