Fisher-Price Y9854 User manual

fisher-price.com
Y9854
Please keep this instruction sheet for future reference,
as it contains important information.
Requires two AA (LR6) alkaline batteries for operation (not included).
Adult assembly is required. Tool required for assembly:
Phillips screwdriver (not included).
Wipe this toy with a damp cloth. Do not immerse.
This product has no consumer serviceable parts.
Do not take this toy apart.

2
Consumer Information
©2013 Mattel. All Rights Reserved.
PRINTED IN MEXICO Y9854pr-0921
FCC Statement (United States Only)
This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used
in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could
void the user’s authority to operate
the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this
device may not cause harmful
interference and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
CO
N
SU
MER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
ICES-003
This Class B digital apparatus complies
with Canadian ICES-003. Operation is
subject to the following two conditions:
(1) this device may not cause harmful
interference and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
NMB-003
Cet appareil numérique de la classe
B est conforme à la norme NMB-003
du Canada. L’utilisation de ce dispositif
est autorisée seulement aux conditions
suivantes : (1) il ne doit pas produire de
brouillage et (2) l’utilisateur du dispositif
doit être prêt à accepter tout brouillage
radioélectrique reçu, même si ce brouillage
est susceptible de compromettre le
fonctionnement du dispositif.

3
Assembled Parts
Back Frame
2 Front Axles
4 Wheels
4 Caps
Handle
Front Frame
#8 x 3
/4" (1,9 cm) Screw – 11
Tighten or loosen all screws
with a Phillips screwdriver.
Do not over-tighten.
Shown Actual Size
CAUTION
This package contains small parts. For adult assembly only.

4
Battery
Installation
• Locate the battery compartment on
the back of the toy.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver and remove the door.
• Insert two AA (LR6) alkaline batteries.
• Replace the battery compartment
door and tighten the screws.
• If the toy begins to operate erratically
you may need to reset the electronics.
Slide the power/volume switch off
and then back on.
• When sounds from this toy become
faint or stop, it’s time for an adult to
change the batteries.
In exceptional circumstances, batteries
may leak fluids that can cause
a chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the
battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
Battery Safety
Information
1,5V x 2
AA (LR6)
• Protect the environment by
not disposing of this product
with household waste
(2002/96/EC). Check your
local authority for recycling
advice and facilities.
For longer life, use alkaline batteries.

5
Assembly
• Fit the front axles to the front frame.
• Insert two screws into each front axle
and tighten.
• First fit a wheel onto each front axle.
Then, fit a cap onto each wheel.
• Insert a screw into each cap
and tighten.
Front Frame
Wheels
Caps
• Insert and "snap" the handle into the
slot in the back frame.
Hint: The handle is designed to fit one
way. If it does not seem to fit, turn it
around and try again.
• Fit the remaining wheels and caps
onto the rear frame.
• Insert a screw into each cap
and tighten.
Handle
Back Frame
Front Axles
1
2
3
4
2

6
Lights, Music
& Hands-on Fun!
• Slide the power/volume switch to
ON with low volume , ON with
high volume or OFF .
• Press the lion's nose for sounds
and lights.
• Press the piano keys to play a note.
• Hear more sounds and lights when
baby walks!
Assembly
• Fit the back panel assembly to the
front panel assembly.
• Insert three screws into the handle
and tighten.
5
6
Power/Volume
Switch