Trinity TLSPBK-0603 User manual

OWNER’S MANUAL
TRINITY 24” Garage Base Cabinet
Model # TLSPBK-0603

Your TRINITY 24” Garage Base Cabinet should include the following parts. Please inspect box contents to
ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY
Customer Service: 800.985.5506 or [e-mail]. Parts can also be requested online at
www.trinityii.com (Help & More, Contact Us).
You will need a Phillips screwdriver for assembly which is not provided.
A B C D
J
RIGHT DOOR HINGE (1)
G
© 2018 TRINITY - 800.985.5506
1
RIGHT DOOR (1)
E
I
F
LEFT DOOR HINGE (1)
CABINET BODY (1) LEFT DOOR (1)BOTTOM PANEL (1)TOP BEAM (1)
H
SHELF SUPPORT (4) KEY (2)FEET LEVELER ( 4 )
PARTS LIST
SHELF( 1 )
WOOD TOP (1)
KL
M
BLACK SCREW
(22) + (2) extra
SILVER SCREW
(13) + (2) extra
N

2
© 2018 TRINITY - 800.985.5506
STEP 2
Unfold CABINET BODY (A).
A (1)
M (14)
Two people are recommended for ease of assembly.
Stand the unfolded CABINET BODY (A) upside down
on the floor.
Note: There is a 40mm diameter hole on the back
panel of the CABINET BODY (A). When the CABINET
BODY (A) is upside down, this hole should be in the
upper left corner of the back panel.
Turn BOTTOM PANEL (C) upside down. Tilt the front
diagonally downward. First, insert the lip into the
inner side of the tab of CABINE BODY (A) at the right
side, then insert into the left side.
Follow the order indicated, insert (12) BLACK SCREWS
(M) through holes on BOTTOM PANEL (C) and tighten
them fully with a Phillips screwdriver to CABINET
BODY (A). Insert (2) BLACK SCREWS (M) through the
tabs on front of CABINET BODY (A) and tighten them
fully to BOTTOM PANEL (C).
ASSEMBLY INSTRUCTIONS
STEP 1
C (1)
hole
1
1
2
3
3
C
A
tab lip
M
4

3© 2018 TRINITY - 800.985.5506
M (4)
STEP 4
Stand the unit right side up.
Position TOP BEAM (B) on top front of the
cabinet. Make sure the lip of TOP BEAM (B)
is inside the tabs. Align the holes on tabs to
pre-installed nuts on lip of TOP BEAM (B).
Insert BLACK SCREWS (M) through these
holes. Tighten them fully with a Phillips
screwdriver.
ASSEMBLY INSTRUCTIONS
STEP 3
B (1)
Screw FEET LEVELER (K) all the way in each
pre-installed nut in four corners of the
BOTTOM PANEL(C).
K (4)
tab lip
C
K
B
M

4
© 2018 TRINITY - 800.985.5506
STEP 6
Note: RIGHT DOOR (E) has a lock on it.
Attach LEFT DOOR (D) and RIGHT DOOR (E) one at
a time to the cabinet front by inserting the pivot
of door hinge which is welded on the BOTTOM
PANEL(C) into the bottom door cylinder.
Position LEFT DOOR HINGE (F) to the left side of
TOP BEAM (B) and RIGHT DOOR HINGE (G) to the
right side of TOP BEAM(B). Make sure to insert
the pivots of DOOR HINGES (F+G) into the top
door cylinders. Align holes on DOOR HINGES
(F+G) to pre-installed nuts on two sides of TOP
BEAM (B). Insert BLACK SCREWS (M) through
these holes. Tighten them fully with a Phillips
screwdriver.
G (1)
ASSEMBLY INSTRUCTIONS
STEP 5
J (1)
D (1)
Lay WOOD TOP (J) gently on a clean surface.
Make sure the side with a rectangular groove
faces up.
Turn the cabinet upside down and put it on
the WOOD TOP (J). Make sure the TOP BEAM
(B) sit inside the groove. Align holes on TOP
BEAM (B) and the top frame of cabinet to
pre-installed nuts on wood top. Follow the
order indicated, insert SILVER SCREWS (N)
through these holes and tighten them fully
with a Phillips screwdriver.
M (4)
F (1)
N (13)
E (1)
pivot
cylinder
1
1
2
3
M
FG
B
E
D
N
B
J

5© 2018 TRINITY - 800.985.5506
H (1)
ASSEMBLY INSTRUCTIONS
STEP 7
I (4)
Stand the unit right side up.
Attach SHELF SUPPORT (I) by hooking it over
the position tab at your desired height. Make
sure all four SHELF SUPPORTS (I) are at the
same level.
Tilt SHELF (H) diagonally to move it inside the
cabinet. Place SHELF (H) on top of all four
SHELF SUPPORTS (I).
Adjust FEET LEVELERS (K) as needed to ensure
your cabinet is level and stable.
shelf support hooked on
position tab
position tab
I
K
H
I

6
© 2018 TRINITY - 800.985.5506
USAGE INSTRUCTIONS
SHELF ADJUSTMENT
Ensure all products have been removed
from the shelf.
To adjust the shelf height position, take
the shelf out of the cabinet, re-attach
the shelf supports to the position tabs at
your desired height.
Tilt the shelf diagonally to move it inside
the cabinet. Place the shelf on top of all
four shelf supports.
Red indicates locked
LOCK AND UNLOCK
Insert the key into the lock on the right
door. Turn it clockwise 90 degree to lock
the door. Turn it counter-clockwise 90
degree to unlock the door.
Before locking the unit, make sure the
doors are fully closed.
position tab
Green indicates unlocked

7© 2018 TRINITY - 800.985.5506
SERVICE PARTS LIST –TLSPBK-0603
Part Number Description Part Number Description
1)
LNA
-06-011-2419
Wood Top
9)
PBK
-16-003-2418
Bottom Panel
2)
PBK
-18-018-2418
Cabinet Body
10)
XWH
-98-001-4264
Feet Leveler
3)
PBK
-09-011-0001
Right Door Hinge
11)
PBK
-08-007-1132
Left Door
4)
PBK
-08-006-1132
Right Door
12)
AMA
-05-019-3150
Door Handle
5)
XBK
-10-001-0XXX
Key
13)
PBK
-13-010-2370
Top Beam
6)
PBK
-03-052-2416
Shelf
14)
PBK
-09-012-0001
Left Door Hinge
7)
XSV
-02-017-0001
Shelf Support
15)
XBK
-01-004-0612
Black Screw
8)
XBK
-02-001-0003
Magnetic Catch
16)
ZSV
-01-004-0415
Silver Screw
TRINITY Customer Service provides the following replacement parts:
2
1
3
6
7
10
9
4
11
13
14
5
15
12
8
16

8
© 2018 TRINITY - 800.985.5506
WARNINGS
CARE AND MAINTENANCE
•Avoid harsh, abrasive cleaners, and other corrosive chemicals.
•Do not use scouring pad for cleaning.
•This item is not certified for outdoor use.
•Wood top can be cleaned with damp cloth and wiped dry immediately with dry cloth. If
needed, solvent-based wood furniture cleaner can be used.
•Clean up any spills immediately to prevent stains from forming on the wood top.
Weight capacity of Shelf (evenly distributed) 75 lb
Total weight capacity of Cabinet (evenly distributed) 200 lb
1. Read and understand all instructions. Failure to follow all instructions may result in injury
and/or damage.
2. The warnings, cautions, and instructions discussed in this manual cannot cover all
possible conditions or situations that may occur. The user must always be aware of their
environment and ensure that they use the product in a safe and responsible manner.
3. Do NOT modify the product in any way. Unauthorized modification may impair the
function and/or safety of the product, and may affect the life of the product.
4. Check for damaged parts.Before using this product, carefully check that all parts are in
good condition, and that the product will operate properly and perform its intended
function. Check for damaged parts and any other conditions that may affect the operation
of this product. Replace damaged or worn parts, and never use this product with a damaged
part.
5. Do NOT overload the product.

9© 2018 TRINITY - 800.985.5506
Thank you for purchasing a TRINITY 24” Garage Base Cabinet. In order to register your product and
receive streamlined customer service, please fill out the following Product Registration Form and (1)
fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com
or (3) scan and email the form to [e-mail]. Include a copy of your original receipt
with your submission.
First Name: Last Name:
Address:
City: State: Zip Code:
Email Address: Phone:
Product Model #: TLSPBK-0603 Purchase Date: / /
Location of Purchase:
Please rate the importance of each feature (1=least important; 10=most important)
Quality Price Size/Capacity Appearance Other
How did you hear about our product?
Magazine Ad Catalog Salesperson Word of Mouth
Internet Store Display Other
Marital Status: Single Married
Household Income: Below $50,000 $50,000-$150,000 $150,000+
Education: High School College Graduate School
Primary Residence: Own Rent
Comments/Suggestions:
PRODUCT REGISTRATION

10
© 2018 TRINITY - 800.985.5506
TRINITY 24” Garage Base Cabinet
Model # TLSPBK-0603
Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the
TRINITY 24“ Garage Base Cabinet (“Product”) that each Product shall be free from defects in workmanship
and materials for a period of 1 year from the date of original purchase. Trinity’s obligation under this
warranty shall be limited to repair or replacement of, or adequate compensation for the Product which shall
not be greater than the amount of the purchase price of the Product, at the option of Trinity, during the
warranty period. All replaced parts and Products become the property of Trinity and must be returned to
Trinity.
This warranty excludes normal wear and tear of the Product and its parts or components, and damage arising
from any of the following: negligent use or misuse of the Product, use contrary to this User’s Manual, or
alteration by any one other than Trinity. The warranty period of 1 year shall not be extended or renewed by
the repair or replacement of, or compensation for, the Product. Any warranty implied by applicable law is
limited in duration to one year from the date of purchase and is subject to the same conditions and
limitations as is provided for our express warranty.
Except as set forth herein, and to the extent of applicable there are no warranties on this Product either
express or implied, and Trinity disclaims all warranties including, but not limited to, any implied warranties of
merchantability, infringement or fitness for a particular purpose. No warranty or guarantee given by any
person, firm, or corporation with respect to this product shall be binding on Trinity.
If your Product is defective or otherwise requires service or parts, please call TRINITY Customer Service toll-
free at [phone], between 8:00 a.m. and 5:00 p.m., PST. Please tell us which model you purchased,
the date of the purchase, and the problem with your Product. A copy of your original purchase receipt must
accompany your service request.
LIMITATION OF REMEDIES AND LIABILITY
Trinity (and its employees, officers, members, managers, affiliates an assigns) shall not be liable for any
incidental, consequential, special, indirect, remote, special or punitive damages for breach of any warranty,
express or implied, including, but not limited to, lost profits, lost savings, loss of anticipated benefits and
attorneys’ fees, which arise out of the purchase, use or inability to use the Product, whether arising out of
contract, negligence, strict tort, product liability, or any other legal theory on which a claim is based. As
noted above, to the extent damages are allowed by our express warranty or by applicable law, those
damages may not exceed the purchase price paid for the Product. Without limiting the foregoing Purchaser
assumes all risk and liability for loss, damage or injury to Purchaser and Purchaser’s property and to others
and their property arising out of the use, misuse, or inability to use this Product. This limited warranty shall
not extend to anyone other than the original purchaser of this product, is nontransferable and states your
exclusive remedy.
Some states do not allow the exclusion or limitation of incidental, consequential, special, or punitive
damages, so the above limitation or exclusion may not apply to you. The above warranty gives you specific
legal rights, and you may have other rights which vary from state to state.
1 YEAR LIMITED WARRANTY

TRINITY Customer Service
TEL: [phone]
FAX: [phone]
EMAIL: [e-mail]
Monday through Friday
5:00 AM –5:00 PM (PST)
www.trinityii.com
QUESTIONS? NEED PARTS?
WE ARE HERE TO HELP!
Please feel free to contact us. There are no questions too small, or
any problems too big. We’re committed to providing our customers
with the highest level of service.
CONTACT US

OWNER’S MANUAL
TRINITY 24” Garage Wall Cabinet
Model # TLSPBK-0604

Your TRINITY 24” Garage Wall Cabinet should include the following parts. Please inspect box contents to
ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY
Customer Service: 800.985.5506 or [e-mail]. Parts can also be requested online at
www.trinityii.com (Help & More, Contact Us).
You will need a Phillips screwdriver for assembly which is not provided.
A B C D
J
DOOR HINGE-G (1)
G
© 2018 TRINITY - 800.985.5506
1
SHELF (1)
E
I
F
DOOR HINGE-F (1)
CABINET BODY (1) DOOR (1)BOTTOM PANEL (1)TOP PANEL (1)
H
SHELF SUPPORT (4)
KEY (2) BLACK SCREW
(24) + (2) extra
PARTS LIST
ANCHOR (4)MOUNTING SCREW (4)
WALL BRACKET (1)
K L
M

2
© 2018 TRINITY - 800.985.5506
STEP 2
Unfold CABINET BODY (A). A (1)
J (8)
Two people are recommended for ease of assembly.
Stand the unfolded CABINET BODY (A) upside down
on the floor.
Note: There is a 40mm diameter hole on the back
panel of the CABINET BODY (A). When the CABINET
BODY (A) is upside down, this hole should be in the
upper left corner of the back panel.
ASSEMBLY INSTRUCTIONS
STEP 1
C (1)
hole
Turn BOTTOM PANEL (C) upside down. Tilt the front diagonally
downward. First, insert the lip into the inner side of the tab of
CABINET BODY (A) at the right side, then insert into the left side.
Note: Do not install screws in the two holes at the right or left
front corners of BOTTOM PANEL (C) until instructed.
Follow the order indicated, insert (6) BLACK SCREWS (J) through
the hole on each back corner and four holes on the back side of
BOTTOM PANEL (C). Tighten them fully with a Phillips
screwdriver. Insert (2) BLACK SCREWS (J) through the tabs on
front of CABINET BODY (A) and tighten them fully to BOTTOM
PANEL (C).
1
2
A
C
lip tab
J
3

3© 2018 TRINITY - 800.985.5506
J (4)
STEP 4
DOOR (D) can be installed on the left OR right
side of the cabinet. Only install one hinge in this
step.
RIGHT INSTALLATION:
Position DOOR HINGE-G (G) on the left front
corner of the outside of BOTTOM PANEL (C) and
align the holes. Make sure the pivot of hinge
faces down.
LEFT INSTALLATION:
Position DOOR HINGE-F (F) on the right front
corner of the outside of BOTTOM PANEL(C) and
align the holes. Make sure the pivot of hinge
faces down.
Insert (2) BLACK SCREWS (J) through the DOOR
HINGE (F or G) and (2) through BOTTOM PANEL
(C). Tighten fully with a Phillips screwdriver.
Stand the unit right side up.
Tilt front of TOP PANEL (B) diagonally downward. First, insert the
lip into the inner side of the tab of CABINET BODY (A) at the right
side, then insert into the left side.
Note: Do not install screws in the two holes at the right or left
front corners of TOP PANEL (B) until instructed.
ASSEMBLY INSTRUCTIONS
STEP 3
G (1)
B (1)
F (1)
J (8)
OR
Follow the order indicated, insert (6) BLACK SCREWS (J)
through the hole on each back corner and four holes on
the back side of TOP PANEL (B). Tighten them fully with a
Phillips screwdriver. Insert (2) SCREWS (J) through the tabs
on front of CABINET BODY (A) and tighten them fully to
TOP PANEL (B).
Open Left
Open Right
A
C
pivot
J
G
F
1
2
B
lip tab
J
3

4
© 2018 TRINITY - 800.985.5506
STEP 6
ASSEMBLY INSTRUCTIONS
STEP 5
Attach DOOR (D) to the cabinet front by
sliding the bottom door cylinder over the
DOOR HINGE (F or G) installed in Step 3.
Position remaining DOOR HINGE (G or F) to
the left or right front corner of TOP PANEL (B).
Make sure to insert the pivot of DOOR HINGE
into the top door cylinder first.
Align holes on DOOR HINGE (G or F) to pre-
installed nuts on frame of CABINET BODY (A).
Insert (2) BLACK SCREWS (J) through the
DOOR HINGE (G or F) and (2) through TOP
PANEL (B). Tighten fully with a Phillips
screwdriver.
G (1) F (1) J (4)
OR
D (1)
M (1)
K (2) L (2)
Position WALL BRACKET (M) on the wall at the desired
height.
If needed, use a pencil to mark off the mounting location
on the wall through one of the oval holes on each end of
WALL BRACKET (M). Drill holes in marked locations.
Insert ANCHOR (L) completely into each drilled hole.
Fasten SCREWS (K) through the oval holes on WALL
BRACKET (M) into the wall or anchors tightly with a
Phillips screwdriver.
Note: Please consult a local contractor if you are unsure
if your wall is able to bear the load of the wall cabinet.
Open Left
Open Right
G
pivot
cylinder
J
D
F
J
D
L
K
M

5© 2018 TRINITY - 800.985.5506
Lift the cabinet and hang it carefully on
two hooks of WALL BRACKET(M) through
two square holes on the back side of
cabinet. Two people are needed, DO NOT
attempt this alone.
There are two small round holes on the
back side of cabinet. Use a pencil to mark
off the fastening location on the wall
through the holes. Drill holes in marked
locations. Insert ANCHOR (L) completely
into each drilled hole. Insert SCREWS (K)
through the round holes on cabinet into
anchors. Fasten the screws tightly with a
Phillips screwdriver.
ASSEMBLY INSTRUCTIONS
STEP 7
K (2) L (2)
Attach SHELF SUPPORT (H) by
hooking it over the position tab
at your desired height. Make
sure all four SHELF SUPPORTS (H)
are at the same level.
Tilt SHELF (H) diagonally to
move it inside the cabinet. Place
SHELF (E) on top of all four
SHELF SUPPORTS (H).
H (4) E (1)
STEP 8
Shelf supports hooked
on position tabs
Hook
Small round hole Square hole
L
K
H
E

6
© 2018 TRINITY - 800.985.5506
USAGE INSTRUCTIONS
SHELF ADJUSTMENT
Position Tabs
LOCK AND UNLOCK
Insert the key into the lock on the right
door. Turn it clockwise 90 degree to lock
the door. Turn it counter-clockwise 90
degree to unlock the door.
Before locking the unit, make sure the
doors are fully closed.
Ensure all products have been removed
from the shelf.
To adjust the shelf, take the shelf out of
the cabinet and re-attach the shelf
supports to the position tabs at your
desired height.
Tilt the shelf diagonally to move it inside
the cabinet. Place the shelf on top of all
four shelf supports.
Red indicates locked Green indicates unlocked

7© 2018 TRINITY - 800.985.5506
SERVICE PARTS LIST –TLSPBK-0604
Part Number Description Part Number Description
1)
PBK
-16-004-2411
Top Panel
9)
PBK
-08-008-2319
Door
2)
PBK
-18-018-2412
Cabinet Body
10)
AMA
-05-019-1850
Door Handle
3)
XBK
-02-001-0003
Magnetic Catcher
11)
PBK
-09-012-0001
Door Hinge
-G
4)
PBK
-03-052-2410
Shelf
12)
XBK
-01-004-0612
Black Screw
5)
XSV
-02-017-0001
Shelf Support
13)
PBK
-19-005-2402
Wall Bracket
6)
PBK
-16-003-2411
Bottom Panel
14)
ZSV
-01-003-0530
Mounting Screw
7)
XBK
-10-001-0XXX
Key
15)
XWH
-01-032-0630
Anchor
8)
PBK
-09-011-0001
Door Hinge
-F
TRINITY Customer Service provides the following replacement parts:
2
1
3
5
7
9
11 4
12
13
14
68
10
15