Flash LED PAR 18x10W RGBW 4in1 IP20 User manual

User Manual
Instrukcja Obsługi
F7100332
LED PAR 18x10W
RGBW 4in1 IP20

Please keep this User Manual for future
      
another user, be sure that they also receive
this instruction booklet.
Unpack and check carefully there is no
transportation damage before using the

Before operating, ensure that the voltage
and frequency of power supply match the

It’s important to ground the yellow/green
conductor to earth in order to avoid electric
shock.
Disconnect main power before servicing
and maintenance.


only, but always by taking its base.
Do not use the device in high humidity
conditions. Use in -10°C to +35°C
IMPORTANT!

at the LED PAR, as intense illumination can
damaged the display.
In the event of serious operating problem,
     

carried out by unskilled people can lead to
damage or malfunction. Please contact the
nearest authorized technical assistance
center. Always use the same type spare
parts.
Do not connect the device to any dimmer
pack.
Do not touch any wire during operation
and there might be a hazard of electric
shock.
To prevent or reduce the risk of electrical

rain or moisture.

visibly damaged.
Do not look directly at the LED light spot

WARNING!
to the power supply in order to avoid
condensation.
2. SAFETY INFORMATION
1. INTRODUCTION
    LED PAR 18x10W RGBW 4in1 IP20  
        

WARNING!
User Manual •Instrukcja Obsługi
Figure 2.


LED PAR 18x10W RGBW 4in1 IP20 •Art No F7100332
       
holes on the bracket. Always ensure that
       
and slipping while operating. Always
ensure that the structure to which you are
attaching the unit is secure and is able to
support a weight of 10 times of the unit’s
5.1 Connecting DMX signal
     

4. INSTALLATION
5. CONNECTION
3. PRODUCT INFORMATION
weight. Also always use a safety cable that
can hold 12 times of the weight of the unit



of people and has no one pass by or under
it.
      
interfaces:


1
3
22
FEMALE
XLR
GROUND
DMX +
DMX -
MALE
XLR
3
1
CAUTION!     
DMX signal has to be terminated with a



DMX
Controller DMX 512 DMX 512
1
FEMALE
XLR
GROUND
DMX +
DMX -
MALE
XLR
2
3
4
5
1
2
3
45


Light source: 18pcs 10W RGBW
4 in 1 LED
Power supply: AC 110V/240V 50/60Hz,
Signal: DMX 512
RGBW color mixing system can create
innumerable colors

par housing
Waterproof: IP20

Power consumption: 154 W





The connection is performed using
power cable with PowerCon connector
(included). The device must be
operated by qualified personnel.
5.2 Voltage specification
Input Voltage Total Power Frequency
110/240V 154W 50/60Hz
5.3 Connecting power supply
5.4 LED Display function
CAUTION! In the case of cable damage do not attempt to repair.

a person with appropriate permissions.
Make sure that the power grid supply
parameters are consistent with device
parameters and limitations are not

Using lamp, the change rate of power voltage should be within
± 10%, if the voltage is too high, it will shorten the light’s life; if it’s


reduce the life span of lamps and bulbs; intermittent using will
improve the life of bulbs and lamps.
A B C D

B. Up
C. Down
D. Enter
HOW TO OPERATE?
Press button A


Bor Cbutton.
D
User Manual •Instrukcja Obsługi

6. DMX CHANNELS
Channels Function Details
CH.1 Dimmer R, G, B, dimmer, linear, Dark to Bright
CH.2 Red R dimmer, linear, Dark to Bright
CH.3 Green G-dimmer, linear, Dark to Bright
CH.4 Blue B-dimmer, linear, Dark to Bright
CH.5 White W-dimmer, linear, Dark to Bright
CH.6 Strobe 1-79 Macro, 80-255 Strobe
CH.7 Sound activated 0-255
CH.8 Color Selection 0-255
No. Display Function
1 D0001 10CHs Address Code, (001—512)
Change the address code by B or C button
2 CC00 8Colors Changing, (01—99)
Color change fast by B or C button
3 CP00 8colors gradual change, (01—99)
Speed of gradual changing by B or C button
4 CL00 8 Colors mixed changing, (01—99)
Select color. While change color, with B or C button
5 BEBE Music activate
6 R220 Red color Changing, (000—255)
Change the color by B or C button
7 G220 Green color Changing, (000—255)
Change the color by B or C button
8 B220 Blue color Changing, (000—255)
Change the color by B or C button
9 W220 Blue color Changing, (000—255)
Change the color by B or C button
LED PAR 18x10W RGBW 4in1 IP20 •Art No F7100332

OSTRZEŻENIE!
WAŻNE!



Rysunek 2. 

User Manual •Instrukcja Obsługi

2. ZASADY BEZPIECZENSTWA
3. INFORMACJE O PRODUKCIE
4. INSTALACJA
    LED PAR 18x10W RGBW 4in1 IP20. Ze
       


przez wykwalifikowany personel, aby
  

    


    
    

   



   
w zakresie od temperatur od -10°C do
+35°C
     
  

    

    
w dobrze wentylowanym pomieszczeniu,
     

     
     

UWAGA!
     



   
     
    

uszkodzenia spowodowane niestabilnym

    
      
   
     
    
   

    

18szt. 10W RGBW
4 w 1 LED








Waga netto: 2,2kg



LED PAR 18x10W RGBW 4in1 IP20 •Art No F7100332

DMX
Controller DMX 512 DMX 512
5.2 Specyfikacja zasilania

Napięcie Zasilania Pobór Mocy Częstotliwość zasilania
110/240V 154W 50/60Hz

    
    

5. POLACZENIA






1
3
22
ŻEŃSKI
XLR
GROUND
DMX +
DMX -
MĘSKI
XLR
3
1
    




UWAGA! 


wykwalifikowany personel techniczny.
    
    
     
  

ŻEŃSKI
XLR
1
GROUND
DMX +
DMX -
MALE
XLR
2
3
4
5
1
2
3
45


User Manual •Instrukcja Obsługi


A B C D

B. Up
C. Down
D. Enter
A


Blub C.
Przycisk D
LED PAR 18x10W RGBW 4in1 IP20 •Art No F7100332
Nr Wyświetlacz Funkcje
1 D0001 Kod adresu 10CHs, (001-512)
Zmień kod adresu za pomocą przycisku B lub C.
2 CC00 Zmiana skoku 8 kolorów, (01–99)
Szybka zmiana koloru przyciskiem B lub C.
3 CP00 Stopniowa zmiana 8 kolorów, (01–99)
Szybkość stopniowej zmiany przyciskiem B lub C.
4 CL00 Stopniowa zmiana 8 kolorów, (01–99)
Szybkość stopniowej zmiany przyciskiem B lub C.
5 BEBE Aktywacja Dźwiękiem
6 R220 Zmiana koloru czerwonego, (000–255)
Zmień kolor za pomocą przycisku B lub C.
7 G220 Zmiana koloru zielonego, (000–255)
Zmień kolor za pomocą przycisku B lub C.
8 B220 Zmiana koloru niebieskiego (000–255)
Zmień kolor za pomocą przycisku B lub C.
9 W220 Zmiana koloru niebieskiego (000–255)
Zmień kolor za pomocą przycisku B lub C.

6. LISTA KANALOW DMX
User Manual •Instrukcja Obsługi
Kanał Funckcje Opis
CH.1 Dimmer R, G, B, dimmer, liniowo, Ciemny do Jasnego
CH.2 Czerwony R-dimmer, liniowo, Ciemny do Jasnego
CH.3 Zielony G-dimmer, liniowo, Ciemny do Jasnego
CH.4 Niebieski B-dimmer, liniowo, Ciemny do Jasnego
CH.5 Biały W-dimmer, liniowo, Ciemny do Jasnego
CH.6 Stroboskop Y-dimmer, liniowo, Ciemny do Jasnego
CH.7 Aktywacja Dźwiękiem 0-255
CH.8 Wybór Koloru 0-255

LED PAR 18x10W RGBW 4in1 IP20 •Art No F7100332

www.flash-butrym.pl
F7100332