Flight Model Sbach 342 55" Operation instructions

CAUTION: This plane is not a toy!
Please read this manual in its entirety before attenpting to
assemble the model
Sbach 342 55”
Wing span:55"/1400mm;
Wing area:48sq.dm;
Length:57"/1457mm;
Flying Weight：1700-1850g
Engine:2cycle 46-52;4cycle
60-70
Radio:6channels 5servos;
Glow & electric RC model

Cut the servo holes on the bottom of the main wings
Check for movement and center on the servo for
the aileron to be in a level resting position.
Check to make sure you have the servos in a reverse manner so ailerons with work properly.
Connect the aileron and the main wing by hinges.
Be sure to apply instant type glue to both sides of each hinges.

Insert and glue the vertical fin.
Assemble the rudder servo.

Insert and glue the stabilizer. Assemble the elevator servo.
Apply instant type glue to both sides of each hinges of the rudder.
Screw four TP screws to fix up the tail wheel on the tail of the fuselage.

As shown in picture, This is finished for the
tail wheel.

Another scheme for choice
Flight Model MFG CO.
ADD:No.10,Fu Ning Street,Xian Xi Industrial,Chang An Town,Dong
Guan City,Guang Dong Province,China
Tel: [phone]
Fax: [phone]
E-mail:[email protected] / [email protected]
Web: http://www.flight-model.com/product/eindex.asp
http://flight-model.preview.alibaba.com/