Fly Sky FS-CT6A User manual

6 CHANNEL RADIO CONTROL SYSTEM
INSTRUCTION MANUAL
Http:www.flyskychina.com
FS-CT6A
MODEL:
Copy right 2007@flysky co.,ltd
Digital propotional radio control system
Edited by D. Bacon y11m06d30a for:
1. Better understanding in English.
2. Mode 2 operation

Menu
1.Introduction..................................2
2. .....................................2
3. ...........................3
4. ..................................3
8. .....................6
9.Receiver and s .................7
13.Transmitter function notes（Heli）..............1 2
14.Transmitter function notes（Plane）.............
15 ...................... 1 9
5. ...............................4
10.Operation Notes .......................8
10.01 Matching ....................8
10.02 .............................8
10.03 .............................9
13.01 System function options..................12
12. ................ 1 1 Computer software installation
13.02 System function settings..................13
13.03 Switches and potentiometer settings .........15
14.01 System function options..................16
14.03 Switches and potentiometer settings .........18
14.02 System function settings..................17
2.4G 6 Channel remote system
1
FS-CT6A
Model:
Notes
16 .....................2 0
6.Transmitter parameters.........................5
7.Receiver parameters...........................5
11. ........... 1 0 Computer hardware connection
ervo connections
Turn on
Support
Warnings
Safety
Charging
Transmitter layout
Turn off
("binding")
Terms, English/Chinese
Package contents
16
16 16
.
.
........
........
........
....
....
.....
....

2.4G 6 Channel remote system
2
FS-CT6A
Model:
Notes
1.Introduction
2.Services
If you found any problems during operation, please refer to the manual.
If the problem still exist, you could contact our dealers
And you could also log on to our website service center:
HTTP:WWW.FLYSKYCHINA.COM
Thank you
.
//

3.
2.4G 6 Channel remote system
3
FS-CT6A
Model:
Notes
Please pay attention to the following symbols
Danger:
If the oper ator does not oper at e by fol low ing the inst ruct ions,
the oper ator may lead to ser ious inj ur ies, even Mor tal danger.
Warning:
If the operator does not operate by following the inst ruct ions,
the operator may lead to serious injuries, even Mortal danger.
Attention:
If the op er at or do es no t op er at e by fol lowing the inst ruct ion s,
the op er at or may lea d to mino r injuries, but generally it will
not cau se ser ious inj ur ies to the op er at or.
Prohibition Mandatory
4.Safty guides
Do not fly in bad weather such as rain or thunder
Before you fly, please ma ke sure the mo veme nt of
Warnings
:
servos are correct.
Set throttle and throttle trim to lowest position before turning on the receiver.
Flashing transmitter LED indicates low battery, do not fly.
Shut off receiver before shutting off the transmitter.
Otherwise uncontrolled operation may result!

5.
Transmitter charger:
1.
2. C
3. Connect the charger to the transmitter
Connector.
4. Cut off the power supply immediately after
Recharge completed.
Receiver charger:
1. C
2. Connect the receiver with battery charger
3. Recharge completed, cut off the power supply immediately.
2.4G 6 Channel remote system
4
FS-CT6A
Model:
Notes
Charging
Do not fly with a low battery.
A charging port is installed on the transmitter, for use with a NiCD or NiMHD battery.
If using LiPo batteries, charge with the balance connector on the battery,
and DO NOT use the built-in charging port.
Use the proper charger for the batteries installed.
Remove batteries for storage, as leakage will ruin the transmitter.
Install batteries with correct polarity, and install the cover.
onnect the charger to AC power.
onnect the charger to AC power.

2.4G 6 Channel remote system
5
FS-CT6A
Model:
Notes
6.Transmitter parameters
7.Receiver parameters
*Frequency band: 2.4GHz
*Power resource：1.5V*4 "AA"Battery
*Program type: GFSK
*Modulation type: FM
*RF Receiver sensitivity：- 76db
*Static current：≤85mA
*Size：45*23*13.5mm
*Size：25*16.8*6.5mm
*Weigth: 12g
*Color: Gray semi-transparent
*Antenna length：26mm
*Channels：6
*Charger port: Yes
*Frequency band: 2.4GHz
*Simulator port: PS-2
*Power resource：1.5V*8 "AA"Battery
*Program type: GFSK
*Modulation type:FM
*RF power：1 9 d b
*Static current：≤250mA
*Voltage display type：LED
*Size：189*97*218mm
*Weigth: 575g
*Color: black
*Antenna length：26mm
*Heli-140/Heli-120/Heli-90/Acro
*Sub Trim：Yes
*Thro Cuv: Programmable
*Pith Cuv: Programmable
*Support multiple user model
*Support trim movement
*Support rudder angle overturned
*Support rudder angle adjustment
*Support both hand software adjustment
*Support swashplate adjustment
*Support programmable channel output
*Channels：6
(Pitch curve)
(Sorry, this is too strange to even guess about - DBacon)
(Mode setup)

2.4G 6 Channel remote system
6
FS-CT6A
Model:
Notes
8.
Antenna
Handle
Switch A
Switch B
Aileron trim
Throttle trim
Power switch
Power indicato r
Rudder trim
Elevator trim
Charger
Port
connecter
Battery
cover
Battery
box
Front
Back Side
Rudder (Lf-Rt)
Throttle (Up-Dn) Aileron (Lf-Rt)
Elevator (Up-Dn)
Bind Button
MODE 2
Variable B Variable A
Simulator
Transmitter Layout

9.
2.4G 6 Channel remote system
7
FS-CT6A
Model:
Notes
Receiver Module
CH1
Ch2
Ch3
Ch4
Ch5
Ch6
Main receiver
Battery
When installing the receiver please make sure that
Receiver
Module
Main receiver
the two antennas are oriented at 90 degrees to each other
Receiver and servo connections
Second receiver is not used
with HK-TR6A V2 receiver

10. Operation notes
10.01 Matching (
1. Install the battery to 2.4G transmitter and
2.
3.Connect the receiver battery to any
4.Press and hold the button on the transmitter, and then switch on the
6.Release the match button on the transmitter, take out the match line.
5.
7.
8.
If the test fail , please repeat the action above.
9.
If the test s, then insert the power into BAT, match complete.
Figure 1
10.02
2.4G 6 Channel remote system
8
FS-CT6A
Model:
Notes
The spread spectrum operation with automatic addressing insures immunity to interference.
The receiver is already matched to the transmitter. To change this:
turn it off.
Insert the BIND plug in the ch 6 position on the receiver.
port, and turn on the receiver.
Flashing LED on the receiver means that it is in matching mode. transmitter.
When the receiver LED stops flashing (about 10 seconds) matching is done.
Turn off the receiver and install servo for ch 6, if used.
s
succeed connector
Bind button
Bind plug
(Goes in Ch 6)
Second receiver is only on
some models, not HK-TR6A V2
1. Turn on transmitter
2. Turn on receiver
3. LED comes on steady
start up
bind)

2.4G 6 Channel remote system
9
FS-CT6A
Model:
Notes
1.Cut off the receiver power supply.
2.Cut off the transmitter power supply.
Tx power ON
Tx power off
Rx power ON
Rx power off
Shut down
10.02 Turn on:
Turn off:
10.03

2.4G 6 Channel remote system
10
FS-CT6A
Model:
Notes
11.Computer hardware connection
1.Install the battery to the transmitter and switch on the power.
2.Plug in the programming line to the transmitter port.
3.Plug in the programming line to computer.
4.Launch the software program T6CONFIG.EXE.
5.Click on setting button, select programming port.
6.Click on GETUSER button, import the transmitter data to pc.
7.Apply programmable settings on the existing parameters.
How to program:

2.4G 6 Channel remote system
11
FS-CT6A
Model:
Notes
12. Computer software installation
12.01 PC software download:
You can download from our website ： WWW.FLYSKYCHINA.COM
12.02 PC software installation:
12.03 PC software application:
1.Install driver software：FS-CT6DRIVER001.EXE
2.Install application software：FS-CT6SOFTWARE.EXE
3.
4.Installation completed.
Application interface
3.Left double-click the application icon and s the following
screen.
1.Install the battery to the transmitter and switch on the power.
2.Connect the transmitter, programming line and pc.
Restart computer
ee

2.4G 6 Channel remote system
12
FS-CT6A
Model:
Notes
13.Transmitter function notes（Heli）
13.01 System function option:
Connect the transmitter programming line with pc, switch on the transmitter and
application software. If you choose these types of heli（HELI90、HELI120、HELI140)
the following interface will appear：
Channel output
display
System function
option
System function
setting
Switch program
setting
Left click the ‘SETTING’ button, the screen on the right
will appear,
Press ‘ok’ button
Left click the ‘HELP’ button
GETUSER:Import the transmitter data to pc.
When programming, please use GETUSER button to transfer the data to PC
this prevent the data overwrite.
select the proper USB port.
for assistance.
Use "TYPE" function to
Select plane or heli.
See page 14, bottom.
Note, this was not functional for me -DBacon.
when done.

2.4G 6 Channel remote system
13
FS-CT6A
Model:
Notes
Left click the ‘SAVE’ button on the interface, the screen on the right
will appear, t
You can give it a name, and left click the ‘save’ button to save.
Left click the ‘OPEN’ button on the main interface, the screen on the
right will appear, this system function is for the parameters setting.
Left click the ‘save’ button after select finished.
Left click the 'ENDPOINT’ button on the interface, the screen on the
right will appear, this
Left click the 'ok' button to finish the adjustment.
Left click the 'cancel' button to restore.
Left click the 'REVERSE’ button on the interface, the screen on the
right will appear, this function is u
Left click the channel you want to change.
Click 'ok' button to finish the adjustment.
Left click the 'SUBTRIM’ button on the interface, the screen on the
right will appear, this function is use
Click 'ok' button to finish the adjustment.
13.02 System function settings
his allows multiple files for models.
is for setting the limits of travel for each servo.
sed to reverse a servo.
d to trim a single servo.

2.4G 6 Channel remote system
14
FS-CT6A
Model:
Notes
Left click the 'DR' button on the interface, the screen on the right will
appear, this function is
This function will only take effect when the 'DR' button is switch on.
Click 'ok' button to finish the adjustment.
Left click the 'STICK SETTING’ button on the interface, the screen
on the right will appear,
Click 'ok' button to finish the adjustment.
Left click the 'THRO CUV' button on the interface, the screen on the
right will appear, this function is use for the adjustment of engine
throttle curve
Click 'ok' button to finish the adjustment.
Left click the 'PITH CUV' button on the interface, the screen on the
right will appear, this function is use for the adjustment of the
helicopter PIT
Click 'ok' button to finish the adjustment.
Left click the 'TYPE’ button on the interface, the screen on the right
will appear, this function is used for the model selection.
This system offers four model to select: ACRO, HELI-90. HELI-120,
HEli-140.
Click 'ok' button to finish the adjustment.
used to adjust Dual Rates for CH 1, 2 & 4
Use this to select mode. Mode 2 is most popular in the US.
There are two states, NOR(mal) and IDEL (stunt).
Each curve is made of 5 points.
CH curve, and has two states also.

2.4G 6 Channel remote system
15
FS-CT6A
Model:
Notes
Left click the 'ARF' button on the interface, the screen on the right
will appear, this function is used for the swash plate adjustment of
CCPM function helicopter
CH1\CH2\CH4 are a Adjusted value from
0% to 100%. Number can be directly entered from the keyboard.
Click 'ok' button to finish the adjustment.
function is used for the programmable
This system offers three individual mixed control
function(MIX1/MIX2/MIX3)
Source: mixed control source select.
Des: destination select
Up rate: upper part's mixed control ratio (-100%to100%)
Down rate: lower part's mixed control ratio (-100%to100%)
Switch: Activation ways (OFF.ON.SWA.SWB)
Click 'ok' button to finish the adjustment.
Click 'ok' button to finish the adjustment.
Left click the 'VR (A)' or 'VR (B)' button on the interface, the screen
on the right will appear,
Click 'ok' button to finish the adjustment.
13.03 Switch and Potentiometers settings
djusted individually.
mixer function.
This function selects what switches "A" & "B" control.
NULL = no control
DR = Use for Dual Rate (on/off)
NORID =
THRO CUT = Use for throttle override (CAUTION !!!)
This function selects what the "A" & "B" Knobs will do.
NULL = Nothing
PITH = Pitch adjust

2.4G 6 Channel remote system
16
FS-CT6A
Model:
Notes
Channel output
display
System function
option
Switch program
setting
System function
option
14.Transmitter function notes（Plane）
Press 'ok' button after finished
14.01 System functi on option
Connect the transmitter programming line with PC, switch on the transmitter and PC software. When
you select Fixed-wing aircraft (ACRO), the following interface will appear:
When programming, please use GETUSER button to transfer the data to PC
GETUSER:Import the transmitter data to pc.
i
Left click the setting button to set the USB port number.
this prevents data overwriting.
Left click the 'HELP' button for assistance

2.4G 6 Channel remote system
17
FS-CT6A
Model:
Notes
Left click the ‘OPEN’ button on the main interface, the screen on the
right will appear, this system function is for the parameters setting.
Left click the ‘save’ button
Left click the 'ENDPOINT’ button on the interface, the screen on the
Left click the 'ok' button to finish the adjustment.
Left click the 'cancel' button to restore.
Left click the 'REVERSE’ button on the interface, the screen on the
Left click the channel you want to change.
Click 'ok' button to finish the adjustment.
Left click the 'SUBTRIM’ button on the interface, the screen on the
Click 'ok' button to finish the adjustment.
13.02 System function settings
Left click the ‘SAVE’ button on the interface, the screen on the right
will appear, t
You can give it a name, and left click the ‘save’ button to save.
his allows multiple files for models.
right will appear, this is for setting travel limits.
right will appear, this function is used to reverse a servo.
right will appear, this function is used to trim a single servo.
Values can be between 0 and 120.
Saving your model settings:
Loading your model settings:
when done.

2.4G 6 Channel remote system
18
FS-CT6A
Model:
Notes
Left click the 'DR' button on the interface, the screen on the right will
appear, this function is use for control of CH1\CH2\CH4
This function will only take effect when the 'DR'
Click 'ok' button to finish the adjustment.
Left click the 'STICK SETTING’ button on the interface, the screen
on the right will appear, this function
Click 'ok' button to finish the adjustment.
Left click the 'TYPE’ button on the interface, the screen on the right
will appear, this function is use for the model selection.
This system offers four model to select: ACRO, HELI-90. HELI-120,
HEli-140.
Click 'ok' button to finish the adjustment.
dual rate
sets the "Mode".
switch is on.
NOTE, this selection is done first when making
a new model setup, but not done at all when
editing an existing model's settings.

2.4G 6 Channel remote system
19
FS-CT6A
Model:
Notes
15.
AIL:副翼
ELE:升降舵
THR:油门
RUD:方向舵
GEAR:
PITCH:螺距
FM:调频
PPM:脉冲相位编码
PCM:脉冲数据编码
MODULE:调制
RF:射频
DR:双重比率
TRAINER:教练
STICK:操纵杆
NULL:无功能
REV:反向
NOR:一般
TRIM:微调
SUB.TRIM:辅助微调
HELI:直升机
ACRO:飞机
VR:电位器
SW:开关
UP:上
DOWN:下
DES:目标
SOURCE:起源
IDEL:特技
Terms, English/Chinese
pp dd (Not Chinese, but what do I know? -DBacon)