FOR-A LTS-10GR User manual

LTS-10GR
10 GbE (RJ45) Option for LTS
LTS-10GS
10 GbE (SFP+) Option for LTS
2nd Edition - Rev.1
SETUP GUIDE

2
Table of Contents
1. Prior to Starting.....................................................................................................................................3
1-1. Overview .....................................................................................................................................3
1-2. Features......................................................................................................................................3
1-3. Items to be prepared by the User ...............................................................................................3
2. Network Settings ..................................................................................................................................4
2-1. Setup Connections......................................................................................................................4
2-2. Log in...........................................................................................................................................4
2-3. Setup...........................................................................................................................................5
3. Connection ...........................................................................................................................................6
3-1. If LTS-10GR Installed..................................................................................................................6
3-2. If LTS-10GS Installed..................................................................................................................6

3
1. Prior to Starting
1-1. Overview
A high-speed interface between an external operating unit and LTO tape is now available by
installing a 10-Gigabit Ethernet option, LTS-10GR or LTS-10GS, in an LTS-70/80.
1-2. Features
Maximum 300MB/s data transfer is available when an LTO-7/8 tape is loaded in an LTO-7/8
drive.
Maximum 160MB/s for LTO-6 tapes and maximum 140MB/s for LTO-5 tapes.
* Transfer speed varies in accordance with LTO tape condition, network connected storage,
and/or network conditions. Transfer speed also varies in accordance with the applied
LAN cable type.
LTS-10GR is compliant with 10GBASE-T Ethernet (IEEE802.3an, RJ-45).
LTS-10GS is compliant with 10GBASE-SR Ethernet (IEEE802.3ae, MMF, SFP+) and
10GBASE-LR Ethernet (IEEE802.3ae, SMF, SFP+).
1-3. Items to be prepared by the User
Items included in each product
ITEM
QTY
REMARKS
LTS-10GR
1
Installed on the LTS-70/80
Setup Guide (PDF)
1
This guide (Included on the LTS-70/80 Manual CD-ROM)
ITEM
QTY
REMARKS
LTS-10GS
1
Installed on the LTS-70/80
Setup Guide (PDF)
1
This guide (Included on the LTS-70/80 Manual CD-ROM)
SFP+ optical transceiver
1
10GBASE-SR SFP+ optical transceiver
Please prepare the following items:
For setting an IP address of the optional LAN port
Display monitor (with a VGA port)
VGA cable
USB keyboard and USB mouse
For LTS-10GR
LAN cable for 10GBASE-T Ethernet (CAT 6a or CAT 7)
* CAT 7 (Category 7) cable is recommended.
For LTS-10GS
10GBASE-SR SFP+ optical transceiver (multi-mode)
Optical fiber cable for 10GBASE-SR
Or
10GBASE-LR SFP+ optical transceiver (single-mode)
Optical fiber cable for 10GBASE-LR

4
2. Network Settings
Set up an IP address that suits your operating environment for using an LTS-10GR/10GS.
This manual explains operations using LTS-10GR/10GS (installed on LTS-70) as an example.
2-1. Setup Connections
1. Connect the VGA port on your LTS rear panel and the display’s VGA port.
2. Connect a USB keyboard and mouse to the USB ports on the rear of the LTS unit.
2-2. Log in
1. Push the LTS-70/80 POWER button.
2. The Power LED lights green.
A screen as shown on the right apears
on the display. Doubleclick the lefthand
icon to activate LTSAdTool.
3. When a pop-up menu as shown at right
appears, input the password “admin” and
click Login button.
LTS-70 Rear Panel
Mouse
Keyboard
Display
USB
VGA Cable
USB
COM
VGA
LAN2
USB
USB
IPMI
LAN1

5
2-3. Setup
1. After logging in, the screen as shown below opens.
2. Select Network from the left pane and change the network settings by selecting and inputting
details on the right.
3. Select LAN3 in the Select the network adapter: and change the network settings to match
the system.
Factory settings are shown as follows.
IP address: 192.168.1.60
Subnet mask: 255.255.255.0
Default gateway: No settings
DNS server: No settings
* Selecting LAN1 opens a setting screen for the 1GbE port that is installed as standard in the LTS.
4. After inputting the above settings, click Save in the lower right corner. A confirmation dialog
box appears, so click Yes to shut down the LTS.
5. Press the power button on the front panel to reboot.

6
3. Connection
Use LAN3 (left port) on the LTS for the LAN connection. Do not connect to LAN4 (right port).
LAN1 (standard 1GbE) interface is available even if an LTS-10GR/10GS is installed. However, LAN1
and LAN3 cannot be used simultaneously.
3-1. If LTS-10GR Installed
Connect the LAN cable to LAN3 (10GBASE-T) on the LTS rear panel and to a LAN port on the PC.
3-2. If LTS-10GS Installed
Connect the fiber-optic cable to LAN3 (10GBASE-R) on the LTS rear panel and to a LAN port on
the PC.
COM
VGA
LAN2
USB
USB
IPMI
LAN1
PC (LTS-WEB screen)
Web browser
FTP client
LAN cable
(CAT 7)
HUB
COM
VGA
LAN2
USB
USB
IPMI
LAN1
PC (LTS-WEB screen)
Web browser
FTP client
Fiber-optic cable
HUB
SPF+ optical transceiver