Forever Redwood BACKYARD PORCH PAVILION User manual

ASSEMBLY INSTRUCTIONS FOR THE
BACKYARD PORCH PAVILION
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
BACKYARD PORCH PAVILION
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
4
5
6
7
8
9
10
11
Drawing
Hurricanes
Gale Wind
Standard
Description
Posts
Single Supports
Supports with
In-Between Blocking
Arched Rafters
Main Knee Braces
Secondary Knee Braces
Roof Boards
Boots
Standard, Gale Wind or
Hurricane Anchors Bases.
If ordered.
Wall Mounted Anchors
Arched Rafter Bases
Qty.
Will
Vary
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
BACKYARD PORCH PAVILION
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
C
D
E
F
G
H
I
J
K
Drawing
Description
½´´ X 3 ½´´ Lag Bolts or Anchor Bolts
(To attach the anchor bases to the ground).
5/16´´ X 3 ½´´ Lag Bolts
(To attach the post to the anchor bases).
½´´ X 4 ´´ Lag Bolts
(To attach the wall mounted anchors to the wall).
3/8´´ X 6 ½´´ Bolts
(To attach the supports, the triangle or the arched
rafter to the posts. / To attach the supports
together. / To attach the main knee braces to the
supports. / To attach the secondary knee braces
to the triangle or to the arched rafter).
3/8´´ X 3´´ Lag Bolts
(To attach the supports to the wall mounted
anchors. / To attach the bases to the arched
rafters and to the in-between blockings).
2 ¼´´ Deck screws
(To attach the roof panels to the triangles. / To
attach the roof fascia’ s to the roof panels).
3/8´´ X 10´´ Bolts
(To attach the knee braces to the posts).
3/8´´ X 8´´ Bolts
(To attach the roof panels to the tringles).
5/16´´ X 3´´ Bolts
(To attach the roof panels together).
3´´ Deck Screws
(To attach the triangles or the arched rafters to
the supports. / To attach the boots to the posts).
1 5/8´´ Deck Screws
(To attach the roof boards to the arched rafters).
Note: Dimensions of your hardware will vary depending on size.

P| 3
BACKYARD PORCH PAVILION
www.ForeverRedwood.com
No
1
2
3
4
5
6
7
8
9
10
11
DESCRIPTION
Posts
Single Supports
Supports with
In-Between Blocking
Arched Rafters
Main Knee Braces
Secondary Knee Braces
Roof Boards
Boots
Anchor Bases
Wall Mounted Anchors
Arched Rafter Bases
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.

P| 4
BACKYARD PORCH PAVILION
www.ForeverRedwood.com
NOTE: In order to know where the post needs to be placed, check the numbers on them. If the post is not marked, then place
the single Supports on the ground to locate the markings for each post position and clearly set your bearings. (“Don´t attach yet,
only place them on the ground to begin with”).
Step 1: Install the anchor bases (9) with ½´´ X 3 ½´´ lag bolts (A). Please see the “How to anchor your pergola document” for all
details. Set your post (1) in the saddle of the anchor bases. Drill a ø ¼´´ hole in the post prior to anchoring to facilitate the
ratcheting of the hardware. After that, use 5/16´´ X 3 ½´´ lag bolts (B) to attach each post to its respective anchor base.
Step 2: Attach the wall mounted anchors (10) to the wall with ½´´ X 4 ´´ lag bolts (C).
5/16´´ X 3 ½´´ Lag Bolts
1
9 or 10
All options of posts (No posts decorative trim, vertical posts decorative trim and horizontal posts decorative trim)
will be installed in the same way.
1
9
10

P| 5
BACKYARD PORCH PAVILION
www.ForeverRedwood.com
Step 3: Attach the single supports (2) to the posts with 3/8´´´x 6 ½´´ bolts (D). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
Step 4: Put up the supports with in-between blocking (3), into the post notches as shown and attach to the posts with the single
support bolts. Each part has a series of numbers that indicate where to attach the part with the corresponding number.
3
3/8´´ X 6 ½´´ Bolts
2
3
2

P| 6
BACKYARD PORCH PAVILION
www.ForeverRedwood.com
Step 5: Attach the single supports to the supports with in-between blocking, use 3/8´´ X 6 ½´´ bolts (D). The quantity of bolts
depends on the length of the supports.
Step 6: Use 3/8´´ x 3´´ lag bolts (E) to attach the wall mounted anchors to the supports.
3/8´´ X 6 ½´´ Bolts
3/8´´ X 3´´ Lag Bolts

P| 7
BACKYARD PORCH PAVILION
www.ForeverRedwood.com
Step 7: Attach the perimeter arched rafter (4) to the posts with 3/8´´ x 6 ½´´ bolts (D) and to the supports with 3´´ deck screws
(J). Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Step 8: Attach the main knee braces (5) to the posts with 3/8´´ x 10´´ bolts (G) and to the supports with 3/8´´ x 6 ½´´ Bolts (D).
Each part has a series of numbers that indicate where to attach the part with the corresponding number.
3/8´´ X 10´´ Bolts
3/8´´ X 6 ½´´ Bolts
5
3´´ Deck screws
3/8´´ X 6 ½´´ Bolts
4
5

P| 8
BACKYARD PORCH PAVILION
www.ForeverRedwood.com
Step 9: Attach the secondary knee braces (6) to the posts with 3/8´´ x 10´´ bolts (G) and to the triangle or the arched rafter with
3/8´´ x 6 ½´´ Bolts (D). Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Step 10: Attach the arched rafter bases (11) to the in-between blockings with 3/8´´ x 3´´ lag bolts (E). Each part has a series of
numbers that indicate where to attach the part with the corresponding number.
3/8´´ X 6 ½´´ Bolts
6
3/8´´ X 10´´ Bolts
3/8´´ X 3´´ Lag Bolts
6
11

P| 9
BACKYARD PORCH PAVILION
www.ForeverRedwood.com
Step 11: Attach the arched rafters (4) to the arched rafter bases with 3/8´´ x 3´´ lag bolts (E). Each part has a series of numbers
that indicate where to attach the part with the corresponding number.
Step 12: Use 3” deck screws (J) to attach the rest arched rafters (4) to the supports. Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
4
3/8´´ X 3´´ Lag Bolts
4
4
3´´ Deck Screws
4
4

P| 10
BACKYARD PORCH PAVILION
www.ForeverRedwood.com
Step 13: Use 1 5/8´´ deck screws (K) to attach the roof boards (7) to the arched rafters. Each part has a series of numbers that
indicate where to attach the part with the corresponding number.
Step 14: Finally, attach the boots (8) to each post with 3’’ deck screws (J).
Put the central
board first.
7
7
3´´ Deck Screws
8
8

P| 11
BACKYARD PORCH PAVILION
www.ForeverRedwood.com
This completes the Pavilion assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question,
don't hesitate to call us (866 332 2403) or email us. We are here to support you.