Fortin EVO-ONE User manual

OMEGALINK GUIDE # 90791 - REV.: 20211102
OL-RF-52-SST
2-way
5-button RF Kit
OL-RF-15-SST
2-way
1-button RF Kit
OL-RF-42-SST
2-way
5-button RF Kit
OL-RF-12-SST
1-way
1-button RF Kit
OL-RF-32-SST
1-way
5-button RF Kit
Parts required (not included):
1x FLASH-LINK UPDATER
1x Microsoft Windows Computer with Internet connection
1Plug in the FLASH-LINK UPDATER into the computer’s USB port with the
provided USB cable.
2Run Flash Link Manager Software.

PAGE 2 / 4 OMEGALINK
3Plug in the EVO-ONE into the FLASH-LINK UPDATER with provided
DATALINK cable.
4
CLICK on the remote starter tab.
5CLICK on VIEW OTHER FIRMWARE,
scroll down.
6SELECT and ash version
OM 0.44 FOR OMEGALINK.
6CLICK on CONFIRM.

PAGE 3 / 4 OMEGALINK
7
DCBHIJ
Red White Blue Blue Black
CONNECT the OMEGALINK in the Blue 4pin connector with clip of the
EVO-ONE using a 4pin connector with clip.
Do not force in an incompatible connector.
WITH IGNITION SWITCH WITH VALET SWITCH
8Turn the
Ignition ON.
Turn the
Ignition ON.
9Turn the Ignition OFF. Press and hold the Valet button until the RED
light ashes on EVO-ONE, then release it
10 Turn the
Ignition ON. x5
Press and release the valet switch ve time.
The parking lights will ash and the horn/siren
will chirp each time to conrm.
11 x4 Press and release the brake pedal four
times. x1 Press and release the brake pedal once.
12
On each Transmitter press and release the LOCK button
On each Transmitter press and release the START button
13 Turn the Ignition OFF. Turn the Ignition OFF.

PAGE 4 / 4 OMEGALINK
MODE 1 - LOCK
MODE 2 - UNLOCK
MODE 3 - TRUNK
MODE 4 - START
MODE 5 - AUX.1
MODE 6 - AUX.2
If you want to change EVO-ONE options, use the following button
mapping.S
WARNING
NOTICE The manufacturer will accept no responsibility for any electrical damage resulting from improper installation of the product,
including either damage to the vehicle itself or to the remote-starter module. This module must be installed by a certied technician
including all of the supplied safety devices. Please note that this guide has been written for trained professional technicians, a certain
level of skills and knowledge is therefore assumed.
Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this mo-
dule, except for the replacement of this module in case of manufacturing defects. This module must be install by qualied technician.
This instruction guide may change without notice.
To download the installation guide, user guide, or the latest quick installation guide, visit: www.fortin.ca
Technical support: TEL: [phone]
Copyright © 2019, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED MADE IN CANADA REV.:20190517