Foscam T8EP User manual

1
User
User Manual Manual
Foscam 4K/8MP Outdoor
POE IP Security Camera
Model: T8EP
V1.1

2
Table of Contents
1 Overview............................................................................................................................................................................. 3
1.1 Key Features...........................................................................................................................................................3
1.2 PoE........................................................................................................................................................................... 3
1.3 Read before Use.................................................................................................................................................... 4
1.4 Packing Contents................................................................................................................................................... 4
1.5 Physical Description.............................................................................................................................................. 4
1.6 SD Card Management...........................................................................................................................................5
1.7 Add Device: Connection via the Foscam App................................................................................................... 5
1.8 Installation............................................................................................................................................................... 6
1.9 Waterproof Lid Installation Guide........................................................................................................................ 7
2 Default Parameters........................................................................................................................................................... 8
3 Specification....................................................................................................................................................................... 8

3
1 Overview
1.1 Key Features
8MP UHD Waterproof IP Camera
H.264+/H.264 video Compression
Supports Human detection, Motion Detection and Vehicle Detection
Compatible with free Foscam Video Management Software
Compatible with free Foscam iOS and Android APP
Supports PoE Function
Supports Full Duplex two-way Audio
Supports HDR
Supports 256GB Micro SD Card storage(External)
Night Vision Range up to 20m(66 feet)
P2P Feature for Easy Remote Access
Supports image snapshot
Supports dual-stream
Supports remote viewing & record from anywhere anytime
Multi-level users management with password protection
Supports multiple network protocols: IP, TCP, UDP, SMTP, FTP, DHCP, RTSP
Supports Alexa
Supports Google Home
1.2 PoE
The Network Camera is PoE-compliant, allowing transmission of power and data via a single Ethernet cable.
Such as the following picture: connect the Network Camera to a PoE-enabled router / switch via Ethernet
cable.

4
1.3 Read before Use
Please first verify that all contents received are complete according to the Package Contents listed below.
Before the Network Camera is installed, please carefully read and follow the instructions in the Quick Setup
Guide to avoid damage due to faulty assembly and installation. This also ensures the product is used properly
as intended.
1.4 Packing Contents
● Camera× 1
● Ethernet Cable× 1
● Quick Setup Guide × 1
● Expansion Screws× 1
● Waterproof Lid × 1
● Mounting Template × 1
● Surveillance sign× 1
● Tweezers× 1
1.5 Physical Description
1.5.1 Front Panel

5
1.5.2 Interface
1. LAN
10/100M adaptive Ethernet interface. Through this interface, IP camera can be connected with various network
devices, such as hub, router, etc.
2. Power Interface
Connect the external power adapter, request for 12V / 1A power.
1.6 SD Card Management
This camera supports Micro SD Card.
When you plug in the SD card during the camera work process, please reboot the camera again, or else the
SD card might not work well.
On Foscam app go to the SettingsDevice StatusDevice Status page, you can see the SD card status.
1.7 Add Device: Connection via the Foscam App
Scan the QR code below to download and install the Foscam APP.
Please refer to the Quick Setup Guide.
1
2

6
1.8 Installation
Please refer to the Quick Setup Guide.
1. Loosen the anti-theft screws, and rotate the shell and base in opposite direction until point a and b are
aligned to remove the shell.
2. Screw o_x001D_ the micro SD cover and Insert a micro SD into the SD card slot. (If you don’t want to use
SD card for storage, skip this step).
3. Install the sticker for positioning in the needed area.
4. Install the base of the device on the surface with proper expansion screws as below.
5. Assemble back the camera and shell, rotate the base and the shell to make point a and b staggered, then
fix them by tightening the anti-theft screws.
6. Set the camera to needed viewing angle.

7
1.9 Waterproof Lid Installation Guide
When mounting your PoE camera outdoors, you are suggested to install the waterproof lid for it. You may
follow the steps for installation.
1. Thread the Ethernet cable through the top cover and then the waterproof connector.
2. Put the rubber seal ring around the Ethernet cable between the top cover and the waterproof connector.
Note: The rubber seal ring provided has been cut. If not, you may manually cut it.
3. Put on the rubber O-ring to the Ethernet port of the camera and plug the Ethernet cable into the Ethernet
port.
4. Align the waterproof connector with the Ethernet port, then twist it clockwise to tighten the two parts.
5. Push the rubber seal ring into the waterproof connector, then screw the top cover and lock it into position
firmly to finish installation.

8
2 Default Parameters
Default network parameters
IP address: obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically
3 Specification
ITEMS
T8EP
Spotlight
Color Temperature
4500K
Image Sensor
Sensor Type
High Definition Color CMOS Sensor
Display Resolution
8.0Megapixels(3840*2160)
Min. Illumination
0 Lux (With IR Illuminator)
Lens
Lens Type
f:4.3mm; F1.6
Angle of view
Diagonal: 108.5°, Horizontal: 90.1°, Vertical 46.2°
Video
Image Compression
H.264+/H.264
Resolution
4K(3840*2160) 6M/20 fps,1080P(1920*1080)1M/25fps,
720P(1280*720)1M/15fps
Stream
Dual stream
Image Adjustment
The hue, brightness, contrast, saturation, sharpness are adjustable
Flip Image
flip and mirror
Night Mode
Manual and automatic modes, when the white light is on, the night
vision image is colored
Night Visibility
With 4pcs IR-LED and spotlight, Night Vision Range up to 20m
Audio
Input/Output
Built-in mic and speaker, supports full duplex 2-way Audio
Audio Compression
PCM/AAC
Siren
Support maximum 100dB alarm siren
Network
Ethernet
One 10/100Mbps RJ45 port
Remote Access
P2P
Network Protocol
IP, TCP, UDP, SMTP, FTP, DHCP, RTSP
System
Requirements
Operating System
Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android
(Foscam app), iOS (Foscam app)
Other Features
Motion Detection
Alarm via E-Mail, upload alarm snapshot to FTP
Human Detection
Alarm via E-Mail, upload alarm snapshot to FTP
Vehicle Detection
Alarm via E-Mail, upload alarm snapshot to FTP
User Accounts
Three levels user role
WDR
Improve image clarity in complex scenario

9
Zoom
6X digital zoom function
Storage
Support max. 256GB Micro SD card, local and FTP storage, Foscam
cloud storage
Reset
Reset button is available
Intelligent Assistant
Supports Alexa, Google Assistant
Power
Power Supply
DC 12V/1.0A (Not standard)
POE Standard
802.3af
Power Consumption
5 Watts (Max.)
Physical
Dimension(LxWxH)
φ110*100mm
Net Weight
380g
Environment
Waterproof
IP66
Operating Temperature
-20°C ~ 40°C (-4°F ~ 104°F)
Operating Humidity
10% ~ 80% non-condensing
Storage Temperature
-20°C ~ 50°C (-4°F ~ 122°F)
Storage Humidity
0% ~ 90% non-condensing
Certification
FCC, CE, RoHS, IP66, UKCA
For other parts, please refer to the “FOSCAM Camera User Manual”