Frico AGS5500 User manual

AGS5500 / AGR5500
Original instructions
.... 17
SE .... 21 GB .... 24
NO .... 28 FR .... 32 DE
.... 36
ES .... 40 NL .... 44 IT .... 48 PL .... 52
RU
AGS5500
AGR5500

AGS5500/AGR5500
2
RU Страницы в начале Инструкции состоят в основном из рисунков, схем и
таблиц. Перевод встречающегося там текста приведен в разделе RU.
Introduktionssidorna består huvudsakligen av bilder. För översättning av de
engelska texter som används, se respektive språksidor.
SE
The introduction pages consist mainly of pictures. For translation of the
English texts used, see the respective language pages.
GB
Introduksjonssidene består hovedsakelig av bilder. For oversettelse av de
engelske tekstene, se de respektive språksidene
NO
Les pages de présentation contiennent principalement des images. Pour la
traduction des textes, consulter la page correspondant à la langue souhaitée.
FR
Die Einleitungsseiten bestehen hauptsächlich aus Bildern. Für die Übersetzung
der verwendetenTexte in englischer Sprache, siehe die entsprechenden
Sprachseiten.
DE
Las páginas introductorias contienen básicamente imágenes. Consulte la
traducción de los textos en inglés que las acompañan en las páginas del
idioma correspondiente.
ES
De inleidende pagina's bevatten hoofdzakelijk afbeeldingen.Voor een vertaling
van de gebruikte Engelse teksten, zie de pagina's van de resp. taal.
NL
Le pagine introduttive contengono prevalentemente immagini. Per le
traduzioni dei testi scritti in inglese, vedere le pagine nelle diverse lingue.
IT
Początkowe strony zawierają głównie rysunki. Tłumaczenie wykorzystanych
tekstów angielskich znajduje się na odpowiednich stronach językowych.
PL

AGS5500/AGR5500
3
Fig.1A. Dimensions AGS5500
L766
4087
147
500
450
30
1,5m: 4 x M10
2, 2,5m: 6 x M10
3 m: 8 x M10
605
555
L
[mm]
AGS5515 1515
AGS5520 2010
AGS5525 2520
AGS5530 3030
PC board (2 x for AGS5525/5530)
WL WH
AGS5515 DN25 (1") DN20 (3/4")
AGS5520 DN32 (1 1/4") DN25 (1")
AGS5525 DN32 (1 1/4") DN32 (1 1/4")
AGS5530 DN40 (1 1/2") DN32 (1 1/4")
Inside thread
SIRe
AGS5500

AGS5500/AGR5500
4
30
500
40
555 605
87
147
1200
470
L
450
1,5m: 4 x M10
2, 2,5m: 6 x M10
3 m: 8 x M10
L
[mm]
AGR5515 1515
AGR5520 2010
AGR5525 2520
AGR5530 3030
WL WH
AGR5515 DN25 (1") DN20 (3/4")
AGR5520 DN32 (1 1/4") DN25 (1")
AGR5525 DN32 (1 1/4") DN32 (1 1/4")
AGR5530 DN40 (1 1/2") DN32 (1 1/4")
Inside thread
AGR5500
Fig.1B. Dimensions AGR5500

AGS5500/AGR5500
5
93040
470 30
30
30
470
470
40
40
965965
990 990
970
AGR5500
Fig.1C.

AGS5500/AGR5500
6
1 2 3
Fig. 3. Installation alternatives
Fig. 4A. AGS5500: Open the unit
min 200
min 80
Fig. 2. Minimum distance
Fig. 4B. AGR5500: Open the unit
1 2 3

AGS5500/AGR5500
7
20 mm
20 mm
20 mm
AGS/AGR5500 + GWB640
AB
CD
EF
GWB640
40
640
120
Type Wall bracket
GWB640
AGS5515/AGR5515 2 pcs
AGS5520/AGR5520 3 pcs
AGS5525/AGR5525 3 pcs
AGS5530/AGR5530 4 pcs
Fig. 5.Wall bracket GWB640

AGS5500/AGR5500
8
SIReBN
SIReAC
SIReAA
SIReRTX 70x33x23 mm
SIReUR 114x70x50 mm
SIReWTA
SIReCJ4
SIReCJ6
SIReCC603 3 m
SIReCC605 5 m
SIReCC610 10 m
SIReCC615 15 m
SIReCC640 40 m
SIReCC403 3 m
SIReCC405 5 m
SIReCC410 10 m
SIReCC415 15
SIRe
C
SIReBN
SIReAC/SIReAA
SIReRTX
SIReUR
SIReWTA
SIReCC
SIReCJ4/SIReCJ6
VKF15LF DN15
VKF15NF DN15
VKF20 DN20
VKF25 DN25
VKF32 DN32
SD230
BPV10
SDM24
ST23024
VOT15 DN15
VOT20 DN20
VOT25 DN25
VKF
SDM24 ST23024
SD230 BPV10
VKF
VLSP VLP
VOT
GWB640 AGS/AGR5500 L: 640 mm
GP1010 AGS/AGR5500 L: 1 m
AGR55XTT15 AGR5515 H: 133-200 mm
AGR55XTT20 AGR5520 H: 133-200 mm
AGR55XTT25 AGR5525 H: 133-200 mm
AGR55XTT30 AGR5530 H: 133-200 mm
GWB640
GP1010 AGR55XTT
See separate manual
Accessories

AGS5500/AGR5500
9
AGS5515/AGR5515, AGS5520/AGR5520
C°
C°
H1 H2N
Id RoomC2 C1 Actuator 230V Supply 230V
PE L
N
Heating
L
N
~
L
N F2 F3F1 F4 F5
Trafo
N
L
Motor
SIRe B1N
Trafo
Motor
protection
Internal
sensor
AGS/AGR5520 AGS/AGR5515
C°
Black Blue
230V 200V
175V
145V
120V
100V
N
Transformer
230V 200V
175V
145V
120V
100V
Transformer
Yellow
Red
Brown
Black Green
N
Orange
Blue
230V~

AGS5500/AGR5500
10
AGS5525/AGR5525, AGS5530/AGR5530
C°
C°
H1 H2N
Id RoomC2 C1 Actuator 230VSupply 230V
PE L
N
Heating
L
N
~
L
N F2 F3F1 F4 F5
Trafo
N
L
Motor
SIRe B1N
Trafo
Motor
protection
Internal
sensor
C°
C°
H1 H2N
Id RoomC2 C1 Actuator 230VSupply 230V
PE L
N
Heating
L
N
~
L
N F2 F3F1 F4 F5
Trafo
N
L
Motor
SIRe B1N
Trafo
Motor
protection
Internal
sensor
C°
Black Blue
230V 200V
175V
145V
120V
100V
N
Transformer
230V 200V
175V
145V
120V
100V
Transformer
Yellow
Red
Brown
Black Green
N
Orange
Blue
Black Blue
230V 200V
175V
145V
120V
100V
N
Transformer
AGS/AGR5530 AGS/AGR5525
230V~

AGS5500/AGR5500
11
SIReB Basic
AGS5500A, AGR5500A
Wiring diagrams for SIReAC Competent, see manual for SIRe.
C2
X5
C1
X4
ROOM
X3
Pot.
Unit ID ACTUATOR SUPPLY
NL NL
PE
L
~
230V~
C2
X5
C1
X4
ROOM
X3
Pot.
Unit ID ACTUATOR SUPPLY
NL NL
PE
L
~
230V~
C2
X5
C1
X4
ROOM
X3
Pot.
Unit ID ACTUATOR SUPPLY
NL NL
PE
L
~
230V~
SIReCC6XX (max 50 m)
SIReCC6XX
(max 50 m)
SIReCC6XX
(max 50 m)
SIReUB1
SIReRTX
(optional)
L=2m
SIReB1/B2/B1EC
SIReB1/B2/B1EC
SIReB1/B2/B1EC

AGS5500/AGR5500
12
SIReB Basic
AGS5500W, AGR5500W
Wiring diagrams for SIReAC Competent and SIReAA Advanced, see manuals for SIRe.
C2
X5
C1
X4
ROOM
X3
Pot.
Unit ID ACTUATOR SUPPLY
NL NL
PE
L
~
230V~
C2
X5
C1
X4
ROOM
X3
Pot.
Unit ID ACTUATOR SUPPLY
NL NL
PE
L
~
230V~
C2
X5
C1
X4
ROOM
X3
Pot.
Unit ID ACTUATOR SUPPLY
NL NL
PE
L
~
230V~
SIReCC6XX (max 50 m)
SIReB1/B2/B1EC
SIReB1/B2/B1EC
SIReB1/B2/B1EC
SIReCC6XX
(max 50 m)
SIReCC6XX
(max 50 m)
SIReUB1
SIReRTX
(optional)
SD230
SD230
SD230
L=1,5m
L=2m

AGS5500/AGR5500
13
Output charts water AGS5500/AGR5500 WL
Supply water temperature: 80 °C
Room temperature: +18 °C
Outlet air temperature: +35 °C*1
Water temperature: 80/60 °C
Room temperature: +18 °C
Type Fan
position
Airflow
[m3/h]
Output
[kW]
Return
water temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
Output*2
[kW]
Outlet
air temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
AGx5515WL max 5500 31 40 0,19 1,3 47 43 0,58 9,8
min 2500 14 33 0,07 0,2 28 51 0,35 3,7
AGx5520WL max 8250 49 34 0,26 2,4 78 46 0,95 27,3
min 3750 21 26 0,09 0,4 47 55 0,57 10,4
AGx5525WL max 11000 64 34 0,34 4,4 100 45 1,22 49,1
min 5000 29 26 0,13 0,8 61 54 0,74 18,7
AGx5530WL max 13750 78 36 0,44 4,9 124 45 1,51 43,2
min 6250 35 29 0,17 0,9 73 52 0,89 16,6
Supply water temperature: 70 °C
Room temperature: +18 °C
Outlet air temperature: +35 °C*1
Water temperature: 70/50 °C
Room temperature: +18 °C
Type Fan
position
Airflow
[m3/h]
Output
[kW]
Return
water temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
Output*2
[kW]
Outlet
air temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
AGx5515WL max 5500 32 44 0,30 2,9 37 38 0,45 6,2
min 2500 14 35 0,10 0,4 22 44 0,27 2,4
AGx5520WL max 8250 48 38 0,36 4,5 62 40 0,75 17,7
min 3750 22 28 0,13 0,7 37 47 0,46 6,8
AGx5525WL max 11000 63 38 0,47 8,2 80 39 0,97 31,8
min 5000 29 28 0,17 1,3 49 47 0,59 12,3
AGx5530WL max 13750 81 41 0,67 10,6 98 39 1,19 28,9
min 6250 36 32 0,23 1,6 58 45 0,70 11,2
*1) Recommended outlet air temperature for good comfort and optimized output.
*2) Nominal output at given supply and return water temperature.
Supply water temperature: 60 °C
Room temperature: +18 °C
Outlet air temperature: +35 °C*1
Water temperature: 60/40 °C
Room temperature: +18 °C
Type Fan
position
Airflow
[m3/h]
Output
[kW]
Return
water temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
Output*2
[kW]
Outlet
air temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
AGx5515WL max 5500 33 48 0,63 11,9 27 32 0,32 3,4
min 2500 15 37 0,16 0,9 16 37 0,19 1,3
AGx5520WL max 8250 48 42 0,67 14,4 46 34 0,55 10,1
min 3750 21 31 0,18 1,2 28 40 0,34 4,0
AGx5525WL max 11000 65 45 1,06 38,2 59 34 0,72 18,1
min 5000 30 32 0,26 2,7 36 39 0,44 7,2
AGx5530WL max 13750 81 45 1,30 35,0 71 33 0,87 17,0
min 6250 36 35 0,35 3,4 42 38 0,51 6,7
Supply water temperature: 55 °C
Room temperature: +18 °C
Outlet air temperature: +35 °C*1
Water temperature: 55/35 °C
Room temperature: +18 °C
Type Fan
position
Airflow
[m3/h]
Output
[kW]
Return
water temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
Output*2
[kW]
Outlet
air temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
AGx5515WL max 5500 32 48 1,14 37,4 21 29 0,26 2,2
min 2500 14 38 0,21 1,5 13 33 0,15 0,9
AGx5520WL max 8250 49 46 1,31 52,4 37 31 0,45 7,0
min 3750 21 32 0,23 2,0 23 36 0,28 2,8
AGx5525WL max 11000 62 46 1,68 94,3 49 31 0,59 12,6
min 5000 29 34 0,33 4,2 30 36 0,36 5,1
AGx5530WL max 13750 78 46 2,10 83,9 58 30 0,70 12,0
min 6250 37 37 0,49 6,4 34 34 0,42 4,8

AGS5500/AGR5500
14
Output charts water AGS5500/AGR5500WH
Supply water temperature: 110 °C
Room temperature: +18 °C
Outlet air temperature: +35 °C*1
Water temperature: 110/80 °C
Room temperature: +18 °C
Type Fan
position
Airflow
[m3/h]
Output
[kW]
Return
water temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
Output*2
[kW]
Outlet
air temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
AGx5515WH max 5500 32 47 0,13 1,2 51 45 0,42 10,9
min 2500 14 34 0,05 0,2 31 55 0,26 4,4
AGx5520WH max 8250 48 42 0,17 0,8 85 48 0,70 10,7
min 3750 22 32 0,07 0,1 52 59 0,43 4,2
AGx5525WH max 11000 62 42 0,22 0,7 111 48 0,92 10,0
min 5000 29 33 0,09 0,1 68 58 0,56 3,9
AGx5530WH max 13750 80 47 0,31 1,0 138 48 1,14 10,6
min 6250 36 37 0,12 0,2 87 59 0,72 4,5
Supply water temperature: 90 °C
Room temperature: +18 °C
Outlet air temperature: +35 °C*1
Water temperature: 90/70 °C
Room temperature: +18 °C
Type Fan
position
Airflow
[m3/h]
Output
[kW]
Return
water temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
Output*2
[kW]
Outlet
air temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
AGx5515WH max 5500 32 52 0,20 2,9 41 40 0,51 16,1
min 2500 15 39 0,07 0,4 26 48 0,31 6,5
AGx5520WH max 8250 48 47 0,28 1,9 69 43 0,85 15,8
min 3750 22 36 0,10 0,3 42 51 0,52 6,1
AGx5525WH max 11000 63 47 0,36 1,7 90 42 1,11 14,7
min 5000 29 36 0,13 0,3 55 51 0,68 5,7
AGx5530WH max 13750 77 50 0,47 2,2 113 42 1,38 15,8
min 6250 36 40 0,18 0,4 71 51 0,87 6,7
*1) Recommended outlet air temperature for good comfort and optimized output.
*2) Nominal output at given supply and return water temperature.
Supply water temperature: 80 °C
Room temperature: +18 °C
Outlet air temperature: +35 °C*1
Water temperature: 80/60 °C
Room temperature: +18 °C
Type Fan
position
Airflow
[m3/h]
Output
[kW]
Return
water temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
Output*2
[kW]
Outlet
air temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
AGx5515WH max 5500 33 58 0,35 8,3 34 36 0,41 11,2
min 2500 14 40 0,09 0,6 21 43 0,26 4,5
AGx5520WH max 8250 48 50 0,39 3,7 57 38 0,70 10,9
min 3750 22 38 0,13 0,5 35 45 0,42 4,3
AGx5525WH max 11000 62 50 0,51 3,3 74 38 0,91 10,1
min 5000 29 38 0,17 0,4 46 45 0,56 4,0
AGx5530WH max 13750 81 54 0,75 5,3 92 38 1,12 11,0
min 6250 35 40 0,22 0,6 58 45 0,70 4,7
Supply water temperature: 82 °C
Room temperature: +18 °C
Outlet air temperature: +35 °C*1
Water temperature: 82/71 °C
Room temperature: +18 °C
Type Fan
position
Airflow
[m3/h]
Output
[kW]
Return
water temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
Output*2
[kW]
Outlet
air temp.
[°C]
Water
flow
[l/s]
Pressure
drop
[kPA]
AGx5515WH max 5500 31 54 0,27 5,1 40 39 0,89 47,9
min 2500 14 40 0,08 0,6 25 47 0,55 19,0
AGx5520WH max 8250 48 50 0,37 3,3 67 42 1,49 47,6
min 3750 22 37 0,12 0,4 41 50 0,91 18,2
AGx5525WH max 11000 63 50 0,48 3,0 88 42 1,96 44,8
min 5000 29 38 0,16 0,4 54 50 1,19 17,1
AGx5530WH max 13750 79 52 0,64 4,0 111 42 2,47 47,1
min 6250 36 40 0,21 0,5 70 51 1,55 19,6

AGS5500/AGR5500
15
AGS5500 A without heat 1
AGS5500 WL with water heat, coil for low temperature water < 80/60 °C 2
See www.frico.se for additional calculations.
Protection class: IP24.
CE compliant.
*1) Lowest/highest airflow of totally 5 fan steps.
*2) Sound power (LWA) measurements according to ISO 27327-2: 2014, Installation type E.
*3) Sound pressure (LpA). Conditions: Distance to the unit 5 metres. Directional factor: 2. Equivalent
absorption area: 200 m². At lowest/highest airflow.
*4) 't = temperature rise of passing air at maximum heat output and lowest/highest airflow.
*5) Applicable at water temperature 60/40 °C, air temperature, in +18 °C.
*6) Applicable at water temperature 80/60 °C, air temperature, in +18 °C.
Type Output
[kW]
Airflow*1
[m3/h]
Sound
power*2
[dB(A)]
Sound
pressure*3
[dB(A)]
Voltage
motor
[V]
Amperage
motor
[A]
Length
[mm]
Weight
[kg]
AGS5515A 0 2500/5800 86 51/70 230V~ 8,1 1515 114
AGS5520A 0 3750/8700 88 52/72 230V~ 12,1 2010 149
AGS5525A 0 5000/11600 89 53/73 230V~ 16,2 2520 189
AGS5530A 0 6250/14500 90 55/74 230V~ 20,3 3030 229
Type Output*5
[kW]
Airflow*1
[m3/h]
Δt*4,5
[°C]
Water
volume
[l]
Sound
power*2
[dB(A)]
Sound
pressure*3
[dB(A)]
Voltage
motor
[V]
Amperage
motor
[A]
Length
[mm]
Weight
[kg]
AGS5515WL 26 2500/5500 19/14 4,0 85 50/69 230V~ 7,7 1515 131
AGS5520WL 45 3750/8250 22/16 8,1 86 51/70 230V~ 11,6 2010 177
AGS5525WL 59 5000/11000 21/16 9,2 88 52/72 230V~ 15,4 2520 222
AGS5530WL 71 6250/13750 20/15 11,0 89 54/73 230V~ 19,3 3030 268
AGS5500 WH with water heat, coil for high temperature water 580/60 °C 2
Technical specifications AGS5500
Type Output*6
[kW]
Airflow*1
[m3/h]
Δt*4,6
[°C]
Water
volume
[l]
Sound
power*2
[dB(A)]
Sound
pressure*3
[dB(A)]
Voltage
motor
[V]
Amperage
motor
[A]
Length
[mm]
Weight
[kg]
AGS5515WH 34 2500/5500 25/18 3,8 85 50/69 230V~ 7,7 1515 129
AGS5520WH 57 3750/8250 27/20 4,9 86 51/70 230V~ 11,6 2010 169
AGS5525WH 74 5000/11000 27/20 6,4 88 52/72 230V~ 15,4 2520 213
AGS5530WH 92 6250/13750 27/20 7,6 89 54/73 230V~ 19,3 3030 258

AGS5500/AGR5500
16
AGR5500 A without heat 1
AGR5500 WL with water heat, coil for low temperature water < 80/60 °C 2
See www.frico.se for additional calculations.
Protection class: IP24.
CE compliant.
*1) Lowest/highest airflow of totally 5 fan steps.
*2) Sound power (LWA) measurements according to ISO 27327-2: 2014, Installation type E.
*3) Sound pressure (LpA). Conditions: Distance to the unit 5 metres. Directional factor: 2. Equivalent
absorption area: 200 m². At lowest/highest airflow.
*4) 't = temperature rise of passing air at maximum heat output and lowest/highest airflow.
*5) Applicable at water temperature 60/40 °C, air temperature, in +18 °C.
*6) Applicable at water temperature 80/60 °C, air temperature, in +18 °C.
AGR5500 WH with water heat, coil for high temperature water 580/60 °C 2
Technical specifications AGR5500
Type Output
[kW]
Airflow*1
[m3/h]
Sound
power*2
[dB(A)]
Sound
pressure*3
[dB(A)]
Voltage
motor
[V]
Amperage
motor
[A]
Length
[mm]
Weight
[kg]
AGR5515A 0 2500/5800 86 51/70 230V~ 8,1 1515 134
AGR5520A 0 3750/8700 88 52/72 230V~ 12,1 2010 174
AGR5525A 0 5000/11600 89 53/73 230V~ 16,2 2520 219
AGR5530A 0 6250/14500 90 55/74 230V~ 20,3 3030 269
Type Output*5
[kW]
Airflow*1
[m3/h]
Δt*4,5
[°C]
Water
volume
[l]
Sound
power*2
[dB(A)]
Sound
pressure*3
[dB(A)]
Voltage
motor
[V]
Amperage
motor
[A]
Length
[mm]
Weight
[kg]
AGR5515WL 26 2500/5500 19/14 4,0 85 50/69 230V~ 7,7 1515 151
AGR5520WL 45 3750/8250 22/16 8,1 86 51/70 230V~ 11,6 2010 208
AGR5525WL 59 5000/11000 21/16 9,2 88 52/72 230V~ 15,4 2520 252
AGR5530WL 71 6250/13750 20/15 11,0 89 54/73 230V~ 19,3 3030 308
Type Output*6
[kW]
Airflow*1
[m3/h]
Δt*4,6
[°C]
Water
volume
[l]
Sound
power*2
[dB(A)]
Sound
pressure*3
[dB(A)]
Voltage
motor
[V]
Amperage
motor
[A]
Length
[mm]
Weight
[kg]
AGR5515WH 34 2500/5500 25/18 3,8 85 50/69 230V~ 7,7 1515 149
AGR5520WH 57 3750/8250 27/20 4,9 86 51/70 230V~ 11,6 2010 194
AGR5525WH 74 5000/11000 27/20 6,4 88 52/72 230V~ 15,4 2520 243
AGR5530WH 92 6250/13750 27/20 7,6 89 54/73 230V~ 19,3 3030 298

AGS5500/AGR5500
21
GB
General Instructions
Read these instructions carefully before
installation and use. Keep this manual for
future reference.
The product may only be used as set out in
the assembly and operating instructions. The
guarantee is only valid if the product is used
in the manner intended and in accordance
with the instructions.
Operation
Air is drawn in at the front side of the unit
and blown out downwards towards the
entrance so that it shields the door opening
and minimizes heat loss.
To get the best curtain effect the unit must
extend the full width of the door opening.
The grille nearest the door is adjustable and
is normally angled outwards to achieve the
best protection against incoming cold air.
The efficiency of the air curtain depends
on the air temperature, pressure differences
across the doorway and any wind pressure.
NOTE! Negative pressure in the building
considerably reduces the efficiency of the air
curtain. The ventilation should therefore be
balanced.
Application area
The AGS5500/AGR5500 air curtain unit is
supplied without heating or hot water heating.
AGS5500/AGR5500 is intended for entrances
and doors, with installation height up to
5,5 metres. AGS5500 is surface mounted and
AGR5500 is intended for recessed mounting.
Protection class: IP24.
Electrical installation
The installation, which should be preceded by
an omnipolar switch with a contact separation
of at least 3 mm, should only be wired by a
competent electrician and in accordance with
the latest edition of IEE wiring regulations.
The control system is pre-installed in the
air curtain with an integrated control card.
SIRe is supplied pre-programmed with quick-
fit connections. Modular cables are connected
to the control board. AGS5525/5530 and
AGR5525/5530 have two SIRe-cards, one of
them being slave connected. See manual for
SIRe.
Operation (230V~) is connected to
terminal block in the junction box on top of
the unit. See wiring diagrams.
Connecting the water coil (W)
The installation must be carried out by an
authorised installer.
The water coil has copper tubes with
aluminium fins and is suitable for connection
to a closed water heating system. The heating
coil must not be connected to a mains
pressure water system or an open water
system.
Note that the unit shall be preceded by a
regulating valve, see Frico valve kit.
The water coil is connected on the upper side
of the unit via connections, see table fig. 1A-
B.
The connections to the heating coil must be
equipped with shut off valves to allow problem
free removal. Water coil is equipped with a
drain valve. A vent valve should be connected
at a high point in the pipe system.
Air valves are not included.
Mounting
The air curtain is installed horizontally with
the supply air grille facing downwards as close
to the door as possible. For the protection of
wider doorways, several units can be mounted
next to each other. Ensure that the service
hatch is accessible and can be fully opened.
The unit has 4 M10 fixed nuts on the upper
side (6 on 2 and 2,5 meter models, 8 on 3
meter model) for ceiling installation using
threaded bars, or for installation using wall
brackets (accessories). See fig. 5.
Adjustment of the air curtain and air flow
The direction and speed of the air flow should
be adjusted considering the load on the
opening. Pressure forces affect the air stream
and make it bend inwards into the premises
(when the premises are heated and the
outdoor air is cold).
The air stream should therefore be directed
outwards to withstand the load. Generally
speaking, the higher the load, the greater the
angle that is needed.
Assembly and operating instructions

AGS5500/AGR5500
22
GB
Service, repairs and maintenance
For all service, repair and maintenance first
carry out the following:
1. Disconnect the power supply.
2. The service hatch is opened by first
opening the intake grille and then unscrew
the screws in the underside of the unit, see
fig. 4A-B.
Filter (W)
The distance between the coil plates in
combination with the hole diameter of
the intake grille protects against dirt and
blockage. This normally makes a separate
filter unnecessary.
Basic setting fan speed
The fan speed when the door is open is set
using the control. Note that the air flow
direction and fan speed may need fine
adjustment depending on the loading of the
door.
Maintenance
Since fan motors and other components are
maintenance free, no maintenance other than
cleaning is necessary. The level of cleaning
can vary depending on local conditions.
Undertake cleaning at least twice a year. Inlet
and exhaust grilles, impeller and elements
can be vacuum cleaned or wiped using a
damp cloth. Use a brush when vacuuming
to prevent damaging sensitive parts. Avoid
the use of strong alkaline or acidic cleaning
agents.
Overheating
All motors are equipped with an integral
thermal safety cut-out. This will operate,
stopping the air curtain should the motor
temperature rise too high. The cut-out
will automatically reset when the motor
temperature has returned to within the
motor’s operating limits.
Temperature control
Temperature control of SIRe maintains the
exhaust temperature. If the temperature
should exceed anyway the overheating alarm
goes off. For more information see the manual
for SIRe.
Fan replacement
1.Determine which of the fans is not
functioning.
2.Disconnect the cables to the relevant fan.
3.Remove the screws securing the fan and lift
the fan out.
4.Install the new fan as above in reverse
order.
Replacing the water coil (W)
1.Shut off the water supply to the unit.
2.Disconnect the connections to the water
coil.
3.Remove the mounting screws securing the
coil in the unit and lift the coil out.
4.Install the new coil in reverse order to the
above.
Draining the water coil (W)
The drain valve is on the underside of the coil
on the connector side. It can be accessed via
the service hatch.
Trouble shooting
If the fans are not working or do not blow properly,
check the following:
• That the intake grille/filter is not dirty.
• Functions and settings of the SIRe control
system, see manual for SIRe.
If there is no heat, check the following:
• Functions and settings of the SIRe control
system, see manual for SIRe.
For units with water coil, also check the following:
• That the water coil is air free.
• That there is enough water flow.
• That incoming water is heated enough.
If the fault cannot be rectified, please contact
a qualified service technician.

AGS5500/AGR5500
23
GB
Safety
• Keep the areas around the air intake
and exhaust grilles free from possible
obstructions!
• The unit may have hot surfaces during
operation and when cooling down!
• Lifting equipment must be used to lift the
unit.
• This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved. Children
shall not play with the appliance. Cleaning
and user maintenance shall not be made
by children without supervision.

Main office
Frico AB Tel: [phone]
Box 102
SE-433 22 Partille mailbo[email protected]
Sweden www.frico.se
For latest updated information and information
about your local contact: www.frico.se
Art.no: 208148, 2017-06-01 HH/CH