Front Runner RRAC201 User manual

RRAC201_REV_A01 © 2021 FRONT RUNNER VEHICLE OUTFITTERS
front runner
RRAC201
ENG
1
Thank you for purchasing Front Runner Wolf Pack Pro Rack Brackets.
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.
Refer to Page 2 for a list of all the components, quantities and tools required.
READ ME !
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this product.
Wolf pack PRO rack brackets

RRAC201_REV_A01 © 2021 FRONT RUNNER VEHICLE OUTFITTERS 2
TOOLS NEEDED
FIGURE 1.1
GET ORGANIZED
1
IN THE BOX
1
1 2 X Clip & Latch Assembly
2 2 X Catch
3 4 X M8 Thin Nut
4 4 X Schnorr Washer
5 4 X M8x12 Button Head
6 1 X T-Slot Rubber (1200mm Long)
2
3
5mm
6
4
5

RRAC201_REV_A01 © 2021 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE
2
2.1
2.2
2.3
Decide where on the rack you
want to fit your Wolf Pack Pro.
(Sold Separately SBOX31).
A- Widthways
B- Lengthways
Slide M8 thin nuts (Item 3) in the choosen
slats. Loosely fit the Wolf Pack catch
brackets as shown using, M8x12 Button
Head, M8 Schnorr Washer & M8 Thin Nut
(Items 3, 4 & 5).
Use the T-slot rubber (Item 6) included and
insert into the T-slot to help prevent cargo
from moving and to protect your rack.
Place your Wolf Pack Pro onto the
rack between the Wolf Pack Pro catch
brackets.Move brackets against the Wolf Pack
Pro before fully tightening.
Secure the Wolf Pack Pro using the Clip &
Latch assembly.
1
B
A
Widthways Lengthways
5
4
3
2

RRAC201_REV _A01 © 2021 FRONT RUNNER VEHICLE OUTFITTERS 4
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
4
Now's the time to visit your favorite Front Runner Dealer in person or online.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
Share your adventures on:
FINISH
3
Congratulations! You did it. Take a step back and admire your work!