Frontier SXTB5610B User manual

Owner's Manual
CAUTION:
Read and follow all Safety Rules and Operating instructions before rst use of this product
Notice: If there are any difference between the product and picture, pls take the product as being correct.
3Rev.20130401
Automobile waxes will protect and preserve the nish of your storage cabinet.
Using the standard application instructions,apply wax regularly to your cabinet to protect
against scratching.
Use a soft, clean cloth and standard cleaning solutions to remove grease, dirt or oil.
Do not use solvents or ammable cleaning liquids.
Lubricate slides with petroleum jelly twice yearly.
Lubricate castors with high quqlity grease annually.
Use graphite to lubricate lock annually.
Drawer fronts,trim and other surfaces may be caleaned with a mild detergent and water.
MAINTENANCE
TO REMOVE THE SLIDE from the unit,rst
remove the drawer(follow the drawer removal
procedure).Lift the front of the slide set using a
screwdreiver to release the hooks.
TO REINSTALL THE SLIDE,place the slide
in the appropriate position,pull the silde and
engage Tab "B"into Slot"B” Tab"A"into Slot"A".
Tab B
Tab A
Slot B
Slot A
step 1
step 2
SXTB5610B

1 2
ASSEMBLY
SIDE HANDLE ATTACHMENT:
NOTE :HOLES IN THE UNLT ARE TAPPED REQULRLNG NO NUTS FOR INSTALLATON.
Attach the handle using six (M6X16) hex screws.Do not over tighten the screws.
OPERATION
REMOVE DRAWERS
Empty the drawer.
Fully extend drawer.
Left side:Push the locking tab down and hold.
Rlght side:Pull the locking tab up and hold.
Pull out the drawer to remove.
Left locking tab
Right locking tab
Fill in the following information and save this manual for future reference
Model # ...............................................
Place of purchase ................................
Date of purchase .................................
SAFETY
SAFETY WARNINGS AND CAUTIONS:
Do NOT stand on this product.You may fall which may cause personal injury.
WEAR SAFETY GLASSES when removing or repositioning the slides.The tool
could slip which may cause personal injury.
When moving this product,do not pull it.Push the product to prevent personal
Injury.
USE THE BRAKES when not moving this product.This will prevnet the product
from rolling,which may cause personal injury or product damage.
BE CAREFUL when opening more than one drawer.The product may become
unstable and tip,which may cause personal injury or product damage.
DO NOT mount this product on a truck bed or any other moving object.This may
cause personal injury or product damage.
DO NOT step in the drawers.You may fall which may cause personal injury.
Appropriately secuer this product before moving it with a forklift.
DO NOT tow with power equipment.The product could tip,which may cause
personal injury or product damage.
DO NOT alter this product in any manner.For example,do not weld extemal
lockbars or attach electrical equipment.This may cause product damage or
personal injury.
Keep the product on level surfaces.The prduct may become unstable and tip if
stored or moved on an un-level surface,which may cause personal injury or
product damage.
Close and lock the drawers before moving this product.The drawers could come
open and make the product unstable and tip,which may cause personal injury or
product damage.
The maximum weight for each drawer should be no more than 100 pounds.
The maximum product weight,incluking contents,should be no more than 1360
pounds.
INSTALL DRAWERS:
To reinstall,push the drawer into the slides until the drawer stops.