Fujitsu FPT-20P-M06 User manual

MB15F8xUL Series
Fractional-N / Integer dual
PLL Frequency Synthesizers
 DESCRIPTION Packages
20-pin, Plastic TSSOP 20-pad, Plastic BCC
FPT-20P-M06 LCC-20P-M05
 FEATURES
RF/RX Frequency - max. 2 GHz 2.5 GHz 2.6 GHz
IF/TX Frequency - max 600 MHz 600 MHz 1.2 GHz
Low Power Supply Voltage 2.7V 2.7V 2.7V
Low Power Supply Current 5.8 Ma 5.8 mA 6.0 mA
RF = 16/17 RF = 16/17 or 32/33 Rx = 32/33
IF = 8/9 OR 16/17 IF = 8/9 or 16/17 Tx = 16/17 or 32/33
RF = 3 to 127 RF = 3 to 255 RF = 8 to 16383
IF = 3 to 16383 IF = 3 to 16383 IF = 8 to 16383
Fractional Function RF = modulo 13 fixed RF = modulo 3 to 16 RF = modulo 5 or 8
Fractional Counter RF = 0 to 15 RF = 0 to 15 RF = 0 to 15
RF = 0 to 31 RF = 0 to 31 RX = 0 to 31
IF = 0 to 15 IF = 0 to 31 TX = 0 to 31
RF = 18 to 1,023 RF = 18 to 1,023 RF = 34 to 1,023
IF = 3 to 2.027 IF = 3 to 2.027 TX = 3 to 2.027
Power Saving Function 0.1µA typ.
The Fujitsu MB15F8xUL series dual PLLs are serial input
Frequency synthesizers. The Fractional-N PLL operates up to 2.6
GHz and the integer PLL operates up to 1200 MHz. They have
built-in dual-modulus prescalers enabling pulse swallow operation
and fixed or selectable fractional modulo. The latest advanced
BiCMOS technology is used resulting in a super low supply
current. A refined charge pump design (Fujitsu’s Super Charger)
provides fast tuning along with low spurious noise and phase
noise characteristics. The MB15F8xUL series is ideally suited for
digital mobile communications, including GSM, DCS1800,
PCS1900, IS-136, IS-95 and ISM applications.
• Fractional-N RF PLL and Integer IF PLL
• Very low spurious and phase noise characteristics
• Low operating voltage: 2.4 to 3.6 volts
• Low operating current: 5.8 to 6 mA (typical)
• Power-saving current: 0.1µA (typical)
• Wide operating temperature: –40 to +85°C
• New 30% smaller BCC 20 package
• Plastic 20-pin TSSOP
• Selectable charge pump current (±1.5 or ±6.0 mA)
• Evaluation Kits available
Parameter MB15F83UL MB15F86UL MB15F88UL
Prescaler Divide Ratios
Reference Divider
Swallow Counter
Pro
g
rammable Counte
r

Reference Information: MB15F83UL
Frequencies: 1733 to 1803 MHz
Step Size: 200 kHz
Hop Time: Less than 2 µs
Charge Pump: 6.0 mA
VCO Sens: 44 MHz/V
Loop Filter Values
Test Results
Phase Noise = -83.2 dBc/Hz Spurious = -69.0 dBc
Switching Times
1733 to 1803 =189 µs 1803 to 1733 = 167 µs

Reference Information: MB15F86UL
Frequencies: 1051.98 to 1078.17
Step Size: 30 kHz
Hop Time: Less than 2 Ms
Charge Pump: 1.5 mA
VCO Sens: 25 MHz/V
Loop Filter Values
Test Results
Phase Noise = -76.34 dBc/Hz Spurious = -88.35 dBc
Switching Times
1051.98 to 1078.17 =1.36 ms 1078.17 to 1051.98 = 1.28 ms

Reference Information: MB15F88UL
Frequencies: 2490 to 2550 MHz
Step Size: 200 kHz
Hop Time: Less than 2 µs
Charge Pump: 6.0 mA
VCO Sens: 52 MHz/V
Loop Filter values
Test Results
Phase Noise = -76.3 dBc/Hz Spurious = -67.2 dBc
Switching Times
2490 to 2550 MHz = 144 µs 2550 to 2490 MHz = 133 µs

Package Dimensions
MB15F8xULPFT - 20 pin, Plastic SSOP (FPT-20P-M06)
MB15F8xULPVA - 20 pin, Plastic BCC (LCC-20P-M05)

Evaluation Systems
Designing a complex subsystem, such as a PLL, is no easy task. Therefore, Fujitsu has made available an
evaluation system to aid in the development of reliable frequency synthesizers. Each evaluation system
consists of two PCBs, controlling software, and instructions.
The RF PCB is laid out to allow the target MB158xUL to be optimized for the chosen application. The RF
board is only semi-populated, which allows the user to configure it to fit the application.
Evaluation Board P/N's
MB1500EB16 for the TSSOP Package
MB1500EB16B for the BCC Package
Typical Evaluation Board
©2002 Fujitsu Microelectronics America, Inc. All rights reserved.
A
ll company and product names are trademarks or registered
trademarks of their respective owners.
With respect to any information contained in this document,
Fujitsu makes no warranties, express, implied or otherwise,
including but not limited to warranty of merchantability or of
fitness for a particular purpose, or warranty that such information
shall be free from errors or that such errors shall be corrected, or
warranty that such info
r
mation shall be free from infringement or
patents, patent applications, copyrights, semiconductor chip
protection rights, trade secrets and other proprietary or legal
rights of a third party. In no event will Fujitsu be responsible for
any incidental or consequential damages arising out of use of this
information.
The information in this document does not convey any license
under the copyrights, patent rights, or trademarks claimed and
owned by Fujitsu Limited, its subsidiaries, or Fujitsu
Microelectronics America, Inc.
Fujitsu Microelectronics America, Inc. reserves the right to
change products or specifications without notice.
No part of this publication may be copied or reproduced in any
form, or by any means, or transferred to any third party without
prior written consent of Fujitsu Microelectronics America, Inc.
Printed in U.S.A.
PLL-DS-20933-5/2002
FUJITSU MICROELECTRONICS AMERICA, INC.
Corporate Headquarters
3545 North First Street, San Jose, California 95134-1804
Tel: [phone]Fax: [phone]
E-mail: [e-mail] Web Site: http://www.fma.fujitsu.com