Fujitsu PRIMERGY TX150 S2 User manual

S
y
stem Confi
g
uration and order-information Guide
PRIMERGY TX150 S2
A
p
ril 2005
®

5 inch Bay
CD-ROM Drive
Floppy Disk Drive
Hard Disk Bay
Keyboard
Mouse
Serial Port
Parallel Port
Display
10/100/1000
Base T Connector
PCI Slot Hard Disk Bay
5 inch Bay
CPU
Power Supply DIMM Slot
Front View
Back View Inside View
PRIMERGY TX150 S2

This document contains basic product and configuration information that will enable you
to configure your system.
Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete
PRIMERGY Rack system.
You can configure your individual PRIMERGY servers in order to adjust your specific requirements.
Please follow the lines. If there is a junction, you can choose which way or component
you would like to take.
Go through the configurator by following the lines from the top to the bottom.
The color of the junction means as follows.
Key to
Or
A
n
d
Confi
g
uration To Order
(
CTO
)
is available with PRIMERGY.
Products are delivered with o
p
tions
(
HDD
,
Memor
y,
Backu
p
device
,
etc.
)
alread
y
mounted as
p
er customer re
q
uirements.
1. How shi
pp
ed
Ph
y
sical
p
ac
k
   A collection of
p
h
y
sical HDDs com
p
risin
g
a RAID.
Lo
g
ical drive    The lo
g
ical drive
(
e.
g
. D:
)
as seen b
y
the O
p
eratin
g
S
y
stem.
Partition    One of the lo
g
ical access units into which a lo
g
ical drive is divided.
Ph
y
sical
p
ac
k
Lo
g
ical drive A
Lo
g
ical drive B
* Drives can be divided into
p
artitions.
Lo
g
ical drive C
Instruction
PRIMERGY TX150 S2
Disk array configuration
Partition 1
Partition 2
HDD HDD HDD HDD
Confi
g
uration To Order
[CTO option]
(1) CPU+Chassis+Memory +
[Main unit]
(
2
)
Mount option in free slots
(
3
)
Standard Memor
y
/ Up
g
rade kit HDD Shipment

<Restrictions>
(
1
)
Each
p
h
y
sical
p
ack must contain the same Product IDs of HDDs.
(
2
)
Maximum lo
g
ical drive size is 2TB.
One
p
h
y
sical
p
ack is com
p
rised b
y
one lo
g
ical drive
(
A
p
h
y
sical
p
ack is the same ca
p
acit
y
as a lo
g
ical drive
)
.
(
3
)
The number of HDDs com
p
risin
g
a
p
h
y
sical
p
ack is as shown below.
RAID Level Descri
p
tion HDDs Ca
p
acit
y
of lo
g
ical drives
RAID 0 The data is broken down into blocks
,
2~16 The ca
p
acit
y
of lo
g
ical drive is same
each on a se
p
arate disk drive as the ca
p
acit
y
of connected HDD.
RAID 1 Du
p
licates the disk and writes 2 The ca
p
acit
y
of the lo
g
ical drive is
the same data onto two disks. half the ca
p
acit
y
of connected HDD.
RAID 5 The data is broken down into blocks 3~16 The ca
p
acit
y
of each lo
g
ical drive is
and each blocks is written to
g
ethe
r
the number of connected HDDs - 1
)
.
with
p
arit
y
bits on a se
p
arate disk drive.
RAID 0+1 Du
p
licates the disk and broken down 4~16 The ca
p
acit
y
of each lo
g
ical drive
into blocks
,
each on a is the half the ca
p
acit
y
of connected
se
p
arate disk. HDD.
(
4
)
The same RAID level must be used when dividin
g
a
p
h
y
sical
p
ack into a number of lo
g
ical drives.
(
5
)
A
p
h
y
sical
p
ack must contain onl
y
HDDs which are connected b
y
the same RAID Controller.
(
6
)
A RAID Controller can su
pp
ort more than one
p
h
y
sical
p
ack.
(
even if different RAID levels
)
- HDD confi
g
ured
p
h
y
sical
p
ack shall be constent in the
p
roduct ID.
- In the case when several
p
h
y
sical
p
ack confi
g
ured with HDD of same ca
p
acit
y,
the HDD shall be constent in the
p
roduct ID.
(
7
)
When the hot s
p
are disk is installed b
y
com
p
risin
g
more than 2
p
h
y
sical
p
ack contains HDDs with different
p
roduct ID
,
each
p
h
y
sical
p
ack must contain at least one hot s
p
are disk with consistent
p
roduct ID.
(
8
)
In case that the same ca
p
acit
y
HDDs are connected to the same RAID Controller
,
these HDDs must also have the same r
p
m s
p
eed.
Restrictions and Notes of RAID Controller Card
Here are the restrictions and notes of RAID Controller Cards. Please be sure to use
p
roducts
alon
g
with these conditions as follows
;
[
PG-140D
]
1. One Controller Card can be mounted in a server
2. Used onl
y
for internal HDD connection. On board SCSI Controller is used for the connection with internal HDD.
3. For RAID0/1/5
,
When one lo
g
ical drive is exsist in
p
h
y
siacl
p
ack
,
Ph
y
sical Pack Ex
p
ansion kit can be a
pp
lied.
[
PG-141CL
]
1. One Controller Card can be mounted in a server
2. Used onl
y
for internal HDD connection. On board SCSI Controller is used for the connection with internal HDD.
3. For RAID0/1/5
,
When one lo
g
ical drive is exsist in
p
h
y
siacl
p
ack
,
Ph
y
sical Pack Ex
p
ansion kit can be a
pp
lied.
Combination matrix of RAID Controlle
r
* o: Supported
TX150 S2 x: Not Supported
Notes of SCSI Controlle
r
[
PG-130L
]
1. When the external SCSI controller and the internal SCSI controller connected simultaneousl
y,
SCSI Controller must be se
p
arated.
2. Number of the external SCSI Controller can be connected with this SCSI Controller : Max. 2 exce
p
t Backu
p
Cabinet
o
x
PG
-
140D
(
Ultra320 SCSI
,
0ch
)
PG
-
141CL
(
Ultra320 SCSI
,
1ch
)
Internal HDD Internal HDD
RAID Controller / SCSI Controller
36GB
10000rpm 36GB
10000rpm 36GB
10000rpm 36GB
10000rpm 36GB
15000rpm 36GB
15000rpm
ch 0
ch 0
ch 1
ch1
RAID Controller

RAID Controller OS Com
p
atibilit
y
Lis
t
Windows Server 2003
,
Standard Edition
Windows Server 2003
,
Enter
p
rise Edition
Windows®2000 Server
Windows®2000 Advanced Server
Windows® Small Business Server 2003
Red Hat Enter
p
rise Linux ES
(
v. 3
)
Red Hat Enter
p
rise Linux AS
(
v. 3
)
* o: Supported
Turbolinux 8 Serve
r
x: Not Supported
Memor
y
OS Com
p
atibilit
y
List
Windows Server 2003
,
Standard Edition
Windows Server 2003
,
Enter
p
rise Edition
Windows®2000 Server
Windows®2000 Advanced Server
Windows® Small Business Server 2003
Red Hat Enter
p
rise Linux ES
(
v. 3
)
Red Hat Enter
p
rise Linux AS
(
v. 3
)
8GB
4GB
8GB
12GB
Memory
4GB
32GB
4GB
x
x
x
x
o
x
oo
oo
x
x
oo
x
x
RAID Controller
PG-140D PG-141CL

Type Mono-Processor Tower Server
Product ID PGQT1521G Pentium®4 3EGHz/1MB x 1, Memory: 512MB (512MB x 1), HDD: 73GB x 1/SCSI-10Krpm, CD-ROM
for Base Unit PGQT1523G Pentium®4 3.40EGHz/1MB x 1, Memory: 512MB (512MB x 1), HDD: 73GB x 1/SCSI-10Krpm, CD-ROM
PGQT1521A Pentium®4 3EGHz/1MB x 1, Memory: 512MB (512MB x 1), CD-ROM, no HDD
PGQT1523A Pentium®4 3.40EGHz/1MB x 1, Memory: 512MB (512MB x 1), CD-ROM, no HDD
CPU Frequencies Pentium®4 3.40EGHz/3EGHz x 1
Second-Level-Cache 1MB
Front-Side-Bus 800MHz
Chipset Intel®E7210
Memory Standard 256MB(256MB ECC DDR SDRAM DIMM x 1)
Maximum 4GB (1GB ECC DDR SDRAM DIMM x 4)
Graphics Controller ATI Range XL, VRAM:8MB (PCI)
Resolution 640x480/800x600/1024x768/1280x1024 dot
Internal Bays Number of Bays 4 (hot-plug)
3.5 inch Available HDD (Ultra320) 73GB(PG-HDH71K)
HDD 147GB(PG-HDH41K)
Maximum 587.2GB
Internal Bays 5inch 3 (2 free bays)
CD-ROM Option (Max 48 ATAPI)
PCI Slots PCI-X 64bit/66MHz (3.3v) 2 (Full Height x 2)
PCI 32bit/33MHz (5.0v) 3 (Full Height x 1)
RAID Controller Option
SCSI Controller Ultra320 SCSI x 1ch
Internal FDD 3.5inch (1.44MB/720KB)
Network Controller (On-board) 1 port (1000 BASE-T/100 BASE-TX/10BASE-T) x 1
Interfaces CRT (Analog RGB), Serial Port x 2 (D-SUB 9pins), Pararell Port (D-SUB 25 pins).
Keyboard (PS/2type Minl DIN 6pins), Mouse (PS/2type Mini DIN 6 pins), USB x3 (ver. 2.0)
Server Management Software ServerView
Power supply Voltage AC100V (50/60Hz) / 200V
Power consumption 330W /1188KJ/h (max.)
Redundant Power supply -
Power Consumption Efficiency Index (Watt/GB) Intel®Pentium®4 3.40EGHz: 0.014 / 3EGHz: 0.015
Dimension (mm) Pedestal: 205(W)x602(D)x444(H)
Rackmount: 440 (482 (incl. protruding parts))(W)x562 (597 (incl. protruding parts))(D)x221.2 (5U) (H)
Weight Pedestal: 27kg (max.) / Rackmount: 29kg (max.)
Environmental Conditions Temperature10-35°C / Humidity 20-80% (non condensing )
OS Support WindowsServerTM2003, Standard Edition/Windows®Small Business Server2003
Windows®2000 Server/Red Hat Enterprise Linux ES (v.3)
*Components installed as standard configuration marked in grey.
Data Sheet
PRIMERGY TX150 S2
Configuration Diagram
Power Supply
Unit
CPU
Pentium®4
3.40GHz/
3.0GHz(1MB)
PCI Slots
PCI5 32bit/33MHz
PCI4 32bit/33MHz
PCI3 64bit/66MHz
PCI2 64bit/66MHz
PCI1 32bit/33MHz
5 inchi Bay 3
5 inchi Bay 2
5 inchi Bay 1
CD-ROM Drive
3.5 inchi FDD
3.5 inch HDD Bay 4
(hotplug)
3.5 inch HDD Bay 3
(hotplug)
3.5 inch HDD Bay 2
(hotplug)
3.5 inch HDD Bay 1
(hotplug)
Memory
DIMM Slot 1 DIMM Slot 2 DIMM Slot 3 DIMM Slot 4
Bay 1
SCSI
Bay 2
SCSI
Bay 3
SCSI
Bay 4
SCSI
Hard Disk 3.5inch Bay (hotplug)
Standard Drive Cage

Max No.
1 2 3 4 5 of Mount
RAID Ctrl 0-Channel 128MB
(0ch/Ultra320)
SCSI Ctrl Ultra160 w/SCSI Cable PG-129B PCI/32bit - - - 1 - 1 SCSI cable for internal SCSI is attached
SCSI Ctrl Ultra160 PG-128 PCI/64bit 3-4122 for connecting external SCSI
Rack Conversion kit for TX150S2
(Pedestal to Rackmount (5U))
PG-R1CK15
Max: 4GB (1GB DIMM x 4) Memory Module-256MB (256MB SDRAM DIMMx1)
PG-RM25AD
Memory Module: 256MB (256MB DIMM x 1) Memory Module-512MB (512MB DIMM x 1)
PG-RM51AD
Memory Module-1GB (1GB DIMM x 1)
PG-RM1AD
4
134
3 No AFT support13
Mount Priority Mountable Cards
5PG-1892
PG-1852
PCI-X/64bit
PCI/32bit 5Eth. Ctrl 1000BASE-T Cu
1
Eth. Ctrl 1000BASE-T Cu
PG-140D PCI-X/64bit
3
2
2
Remarks
3
3
5
Internal array
Bus
--1--
PCI Slot
Connection Table
Memory
Mountable I/O Options
High
Low
Form factor conversion
(Pedestal to Rackmount)
Memory
Slot
PRIMERGY TX150 S2

SCSI On-board SCSI (ChA)
RAID Ctrl 0-Channel 128MB
PG-140D (On-board SCSI ChA)
(''1) Wide Backup Device: PG-DT502/PG-DTA102/PG-VX201
(''2)Backup Device requires 2 bays: PG-DTA102
Max: 4 HDDs HDD U320 10k 73GB non hot plug 1"
PG-HDH71K
HDD U320 15k 73GB non hot plug 1"
PG-HDH75K
RAID Ctrl 0-Channel 128MB
PG-140D HDD U320 10k 147GB non hot plug 1"
PG-HDH41K
*RAID is not applicable when SCSI controller connected.
One backup device can be mounted Tape Drv DAT72 6x36GB Autoloader internal
SCSI Ctrl U160 w/SCSI Cable PG-DTA103
PG-129B
Tape Drv DAT72 36GB internal
PG-DT502
Tape Drv VXA-2 80GB
PG-VX201
*PRIMERGY SX10 is available for rack install type.
SCSI Ctrl U160
PG-128 SCSI Cable PRIMERGY SX10
PG-CBLS001(1.5m) PG-R1BC4
PG-CBLS002 (5m)
Eth. Ctrl 1000-BASE-T Cu Twist Pair Cable
PG-1892
*for PCI-X
Eth. Ctrl 1000-BASE-T Cu
PG-1852
*No AFT Support
<LAN Card for CTO>
Eth. Ctrl 1000-BASE-T Cu PGB1892
Eth. Ctrl 1000-BASE-T Cu PGB1852
SCSI Ctrl U160 w/SCSI Cable (PG-129B)
RAID
Product Name Order
Lot
Wide (''1) / Backup Devices Connection (''2)
TX150 S2 Internal Backup Device ConnectionType of HDD connection
Type Interface
1
Product ID
1
LAN Card
SCSI Configuration
Internal HDD
Internal backup device
on board
SCSI Controller
PCI Bus
PCI Bus
PCI Bus
Internal backup device
PCI Bus
Connecting Internal HDD and Internal Backup Devices
Ultra320
Onboard
SCSI for Internal HDD
PRIMERGY TX150 S2
On-board LAN

Standard Rack 40U Standard Rack 40U and Rack Coupling kit
PG-R6RC1 PG-R6RC2
Standard Rack 24U Standard Rack 24U and Rack Coupling kit
PG-R4RC3 PG-R4RC4
Stabilizer
PG-R3ST1
Standard Rack 40U PG-R6RC1 40U + 2U x 2 700 x 1050 x 2000 o 190kg
Standard Rack 40U and Rack Coupling kit PG-R6RC2 40U + 2U x 2 700 x 1050 x 2000 o 155kg
Standard Rack 24U PG-R4RC3 24U + 2U 700 x 1050 x 1267 o 140kg
Standard Rack 24U and Rack Coupling kit PG-R4RC4 24U + 2U 700 x 1050 x 1267 o 125kg
*o: supported
Display
Keyboard & Monitor mounting kit Keyboard
GP5-R1TB6
Mouse
External Backup Devices
Add-on BASE plate
GP5-R1TB7
800kg o
800kg
480kg o
480kg
Cooling Weight Installable Weight Rack ConnectionProduct Name Product ID No. of units require
d
W x D x H
PRIMERGY Rackmoun
t
19 inch Rack

PG-R6RC1
PG-R6RC2
PG-R4RC3
PG-R4RC4
PRIMERGY SX30 RH PG-R1DC7 3U o
ETERNUS3000 Model 80 (Disk Array) 4-5U o
ETERNUS3000 Model 100 (Disk Array) 4-9U o
ETERNUS3000 Model 300 (Disk Array) 14-32U o
ETERNUS3000 Model 500 (Disk Array) 14-56U o
ETERNUS3000 Model 700 (Disk Array) 14-56U o
Backup Devices PRIMERGY SX10 PGUR1BC4 3U o
Others Stabilizer PG-R3ST1 - o
*o: supported
Rack Conversion kit for TX150 S2
PG-R1CK15 TX150 S2
Display
Keyboard
Mouse
19inch Standard Rack
No. of units require
d
Rack Conversion kit for TX150 S2
(PG-R1CK15)
Hard Disk Devices
Base Unit PRIMERGY TX150 S2 5U
Product ID
Product ID 40U + 2U x 2
24U + 2U
Product Name No. of units
occupied
Base Unit
Display / Keyboard / Mouse
Display / Keyboard
/ Mouse

*PRIMERGY SX10 is available for rack install type.
for 1st server
for 2nd server
SCSI Ctrl U160 SCSI Cable HDCI 1.5m : PG-CBLS001 PRIMERGY SX10
PG-128 SCSI Cable HDCI 5m : PG-CBLS002 PG-R1BC4
SCSI Cable
PG-CBLS022
Tape Drv DAT72 36GB internal
PG-DT501
Tape Drv LTO Ultrim 100GB
PG-LT101
Tape Drv VXA-2 80GB
PG-VX201
S
p
ecifications are sub
j
ect to chan
g
e without notice. For the latest detailed information
,
contact
y
our local re
p
resentative.
All brand names and
p
roduct names are trademarks and re
g
istered trademarks of their res
p
ective holders.
c2001 Fu
j
itsu Limited. All ri
g
hts reserved. Printed in Ja
p
an.
Global Business Develo
p
ment & Marketin
g
Business Strate
gy
& Plannin
g
S
y
stem Products
URL http://primergy.fujitsu.com
Internal Backup Devices with PRIMERGY SX10
TX150 S2
PCI Bus