Fujitsu Oracle M10-1 User manual

Fujitsu M10-1/SPARC M10-1
Installation Guide
Manual Code: C120-0020-08EN
March 2019

Copyright © 2007, 2019, Fujitsu Limited. All rig
h
ts reserved.
Ora le
and/or its affiliates provided te hni al input and review on portions of this material.
Ora le
and/or its affiliates and Fujitsu Limited ea h own or ontrol intelle tual property rights relating to produ ts and te hnology des ribed in this do ument, and su h produ ts,
te hnology and this do ument are prote ted by opyright laws, patents, and other intelle tual property laws and international treaties.
This
do ument and the produ t and te hnology to whi h it pertains are distributed under li enses restri ting their use, opying, distribution, and de ompilation. No part of su h
produ t or te hnology, or of this do ument, may be reprodu ed in any form by any means without prior written authorization of Ora le and/or its affiliates and Fujitsu Limited, and
their appli able li ensors, if any. The furnishings of this do ument to you does not give you any rights or li enses, express or implied, with respe t to the produ t or te hnology to
whi h it pertains, and this do ument does not ontain or represent any ommitment of any kind on the part of Ora le or Fujitsu Limited or any affiliate of either of them.
This
do ument and the produ t and te hnology des ribed in this do ument may in orporate third-party intelle tual property opyrighted by and/or li ensed from the suppliers to
Ora le and/or its affiliates and Fujitsu Limited, in luding software and font te hnology.
Per
the terms of the GPL or LGPL, a opy of the sour e ode governed by the GPL or LGPL, as appli able, is available upon request by the End User. Please onta t Ora le and/or its
affiliates or Fujitsu Limited. This distribution may in lude materials developed by third parties. Parts of the produ t may be derived from Berkeley BSD systems, li ensed from the
University of California.
UNIX
is a registered trademark of The Open Group.
Ora le
and Java are registered trademarks of Ora le and/or its affiliates.
Fujitsu
and the Fujitsu logo are registered trademarks of Fujitsu Limited.
SPARC
Enterprise, SPARC64, SPARC64 logo and all SPARC trademarks are trademarks or registered trademarks of SPARC International, In . in the United States and other
ountries and used under li ense.
Other
names may be trademarks of their respe tive owners.
If
this is software or related do umentation that is delivered to the U.S. Government or anyone li ensing it on behalf of the U.S. Government, the following noti e is appli able:
U.S.
GOVERNMENT END USERS: Ora le programs, in luding any operating system, integrated software, any programs installed on the hardware, and/or do umentation, delivered
to U.S. Government end users are " ommer ial omputer software" pursuant to the appli able Federal A quisition Regulation and agen y-spe ifi supplemental regulations. As su h,
use, dupli ation, dis losure, modifi ation, and adaptation of the programs, in luding any operating system, integrated software, any programs installed on the hardware, and/or
do umentation, shall be subje t to li ense terms and li ense restri tions appli able to the programs. No other rights are granted to the U.S. Government.
Dis laimer:
The only warranties granted by Ora le and Fujitsu Limited, and/or any affiliate in onne tion with this do ument or any produ t or te hnology des ribed herein are those
expressly set forth in the li ense agreement pursuant to whi h the produ t or te hnology is provided.
EXCEPT
AS EXPRESSLY SET FORTH IN SUCH AGREEMENT, ORACLE OR FUJITSU LIMITED, AND/OR THEIR AFFILIATES MAKE NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND (EXPRESS OR IMPLIED) REGARDING SUCH PRODUCT OR TECHNOLOGY OR THIS DOCUMENT, WHICH ARE ALL PROVIDED AS IS, AND
ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE
HELD TO BE LEGALLY INVALID. Unless otherwise expressly set forth in su h agreement, to the extent allowed by appli able law, in no event shall Ora le or Fujitsu Limited,
and/or any of their affiliates have any liability to any third party under any legal theory for any loss of revenues or profits, loss of use or data, or business interruptions, or for any
indire t, spe ial, in idental or onsequential damages, even if advised of the possibility of su h damages.
DOCUMENTATION
IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH
DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.
Copyright
© 2007, 2019, Fujitsu Limited. Tous droits réservés.
Ora le
et/ou ses affiliés ont fourni et vérifié des données te hniques de ertaines parties de e omposant.
Ora le
et/ou ses affiliés et Fujitsu Limited détiennent et ontrôlent ha un des droits de propriété intelle tuelle relatifs aux produits et te hnologies dé rits dans e do ument. De
même, es produits, te hnologies et e do ument sont protégés par des lois sur le droit d’auteur, des brevets, et d'autres lois sur la propriété intelle tuelle et des traités internationaux.
Ce
do ument, le produit et les te hnologies afférents sont ex lusivement distribués ave des li en es qui en restreignent l'utilisation, la opie, la distribution et la dé ompilation.
Au une partie de e produit, de es te hnologies ou de e do ument ne peut être reproduite sous quelque forme que e soit, par quelque moyen que e soit, sans l'autorisation é rite
préalable d'Ora le et/ou ses affiliés et de Fujitsu Limited, et de leurs éventuels on édants de li en e. Ce do ument, bien qu'il vous ait été fourni, ne vous onfère au un droit et
au une li en e, exprès ou ta ites, on ernant le produit ou la te hnologie auxquels il se rapporte. Par ailleurs, il ne ontient ni ne représente au un engagement, de quelque type que
e soit, de la part d'Ora le ou de Fujitsu Limited, ou des so iétés affiliées de l'une ou l'autre entité.
Ce
do ument, ainsi que les produits et te hnologies qu'il dé rit, peuvent in lure des droits de propriété intelle tuelle de parties tier es protégés par le droit d’auteur et/ou édés sous
li en e par des fournisseurs à Ora le et/ou ses so iétés affiliées et Fujitsu Limited, y ompris des logi iels et des te hnologies relatives aux poli es de ara tères.
Conformément
aux onditions de la li en e GPL ou LGPL, une opie du ode sour e régi par la li en e GPL ou LGPL, selon le as, est disponible sur demande par l'Utilisateur Final.
Veuillez onta ter Ora le et/ou ses affiliés ou Fujitsu Limited. Cette distribution peut omprendre des omposants développés par des parties tier es. Des parties de e produit
pourront être dérivées des systèmes Berkeley BSD li en iés par l'Université de Californie.
UNIX
est une marque déposée de The OpenGroup.
Ora le
et Java sont des marques déposées d'Ora le Corporation et/ou de ses affiliés.
Fujitsu
et le logo Fujitsu sont des marques déposées de Fujitsu Limited.
SPARC
Enterprise, SPARC64, le logo SPARC64 et toutes les marques SPARC sont utilisées sous li en e et sont des marques déposées de SPARC International, In ., aux Etats-Unis et
dans d'autres pays.
Tout
autre nom mentionné peut orrespondre à des marques appartenant à leurs propriétaires respe tifs.
Si
e logi iel, ou la do umentation qui l'a ompagne, est on édé sous li en e au Gouvernement des Etats-Unis, ou à toute entité qui délivre la li en e de e logi iel ou l'utilise pour le
ompte du Gouvernement des Etats-Unis, la noti e suivante s'applique :
U.S.
GOVERNMENT END USERS: Ora le programs, in luding any operating system, integrated software, any programs installed on the hardware, and/or do umentation, delivered
to U.S. Government end users are " ommer ial omputer software" pursuant to the appli able Federal A quisition Regulation and agen y-spe ifi supplemental regulations. As su h,
use, dupli ation, dis losure, modifi ation, and adaptation of the programs, in luding any operating system, integrated software, any programs installed on the hardware, and/or
do umentation, shall be subje t to li ense terms and li ense restri tions appli able to the programs. No other rights are granted to the U.S. Government.
Avis
de non-responsabilité : les seules garanties o troyées par Ora le et Fujitsu Limited et/ou toute so iété affiliée de l'une ou l'autre entité en rapport ave e do ument ou tout
produit ou toute te hnologie dé rits dans les présentes orrespondent aux garanties expressément stipulées dans le ontrat de li en e régissant le produit ou la te hnologie fournis.
SAUF
MENTION CONTRAIRE EXPRESSEMENT STIPULEE AU DIT CONTRAT, ORACLE OU FUJITSU LIMITED ET/OU LES SOCIETES AFFILIEES A L'UNE OU L'AUTRE
ENTITE DECLINENT TOUT ENGAGEMENT OU GARANTIE, QUELLE QU'EN SOIT LA NATURE (EXPRESSE OU IMPLICITE) CONCERNANT CE PRODUIT, CETTE
TECHNOLOGIE OU CE DOCUMENT, LESQUELS SONT FOURNIS EN L'ETAT. EN OUTRE, TOUTES LES CONDITIONS, DECLARATIONS ET GARANTIES EXPRESSES OU
TACITES, Y COMPRIS NOTAMMENT TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A L'APTITUDE A UNE UTILISATION PARTICULIERE OU A
L'ABSENCE DE CONTREFACON, SONT EXCLUES, DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE. Sauf mention ontraire expressément stipulée dans e ontrat,
dans la mesure autorisée par la loi appli able, en au un as Ora le ou Fujitsu Limited et/ou l'une ou l'autre de leurs so iétés affiliées ne sauraient être tenues responsables envers une
quel onque partie tier e, sous quelque théorie juridique que e soit, de tout manque à gagner ou de perte de profit, de problèmes d'utilisation ou de perte de données, ou
d'interruptions d'a tivités, ou de tout dommage indire t, spé ial, se ondaire ou onsé utif, même si es entités ont été préalablement informées d'une telle éventualité.
LA
DOCUMENTATION EST FOURNIE "EN L'ETAT" ET TOUTE AUTRE CONDITION, DECLARATION ET GARANTIE, EXPRESSE OU TACITE, EST FORMELLEMENT
EXCLUE, DANS LA MESURE AUTORISEE PAR LA LOI EN VIGUEUR, Y COMPRIS NOTAMMENT TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE,
A L'APTITUDE A UNE UTILISATION PARTICULIERE OU A L'ABSENCE DE CONTREFACON.

Contents
Preface vii
Chapter 1 Understanding the Installation Flow 1
1.1 Workflow for the SPARC M10-1 1
1.2 Workflow for Installing the PCI Expansion nit 4
1.2.1 Points to note on configurations with the PCI expansion unit
connected 6
Chapter 2 Planning and Preparing for System Installation 9
2.1 Safety Precautions 9
2.2 Items requiring
confirmation before installation 12
2.3 Confirming the Physical Specifications of the System 13
2.3.1 Size and weight 14
2.4 Confirming Rack Specifications 14
2.4.1 Mounting conditions for general racks 14
2.4.2 Installation area for a general rack 17
2.5 Checking Environmental Conditions 20
2.5.1 Ambient temperature 22
2.5.2 Ambient relative humidity 22
2.5.3 Contaminant conditions 23
2.6 Checking Acoustic Noise Levels 23
2.7 Checking Cooling Conditions 24
2.8 Checking the Power Input Type 25
iii

2.8.1 Redundant configuration of power supply units 25
2.8.2 Dual power feed 26
2.8.3 Three-phase power feed 26
2.8.4 ninterruptible power supply ( PS) connection (optional) 27
2.9 Preparing Power Supply Facilities 28
2.9.1 Electrical specifications 28
2.9.2 Power cord specifications 30
2.9.3 Breaker characteristics 30
2.9.4 Grounding requirements 32
2.10 Checking External Interface Port Specifications 32
2.10.1 Network configuration example 35
2.11 Checking the Functions of the Operation Panel 36
Chapter 3 Installing the System 39
3.1 Preparing the Necessary Tools/Information for Installation 39
3.2 Confirming Delivered Components 40
3.2.1 Confirming the delivered components of the SPARC M10-1 40
3.2.2 Confirming the delivered components of the PCI expansion unit
41
3.3 Confirming the Rack 41
3.4 Mounting the Chassis in a Rack 42
3.4.1 Mounting the SPARC M10-1 in a rack 42
3.4.2 Mounting the PCI expansion unit in a rack 48
3.5 Mounting Optional Components 69
3.5.1 Mounting optional components in the SPARC M10-1 69
3.5.2 Mounting optional components in the PCI
expansion unit 70
Chapter 4 Connecting Ca les to the Chassis 71
4.1 Connecting Cables to the SPARC M10-1 71
4.2 Connecting Cables to the PCI Expansion nit 74
Chapter 5 Performing an Initial System Diagnosis 79
5.1 Connecting the System Management Terminal to the Chassis 79
5.2 Turning On the Input Power and Starting
the XSCF 80
Fujitsu M10-1/SPARC M10-1 Installation Guide
･
March 2019iv

5.3 Logging In to the XSCF 81
5.4 Checking the XCP Version 82
5.5 Checking the Altitude Setting 82
5.6 Checking the Time Setting 83
5.7 Performing a Diagnosis Test 85
5.8 Checking the Component Status 86
Chapter 6 Making the Initial System Settings 89
6.1 Setting the Password Policy 89
6.2 Setting a ser
Account and Password 92
6.3 Configuring the Telnet/SSH Service 94
6.3.1 Configuring the Telnet service 94
6.3.2 Configuring the SSH service 95
6.4 Configuring the HTTPS Service 96
6.5 Configuring the XSCF Network 97
6.5.1 Setting an XSCF host name and domain name 98
6.5.2 Setting an Ethernet (XSCF-LAN) IP address 99
6.5.3 Setting
the routing 99
6.5.4 Applying network settings 100
6.6 Configuring Memory Mirroring 101
6.7 Creating a Physical Partition Configuration List (PCL) 102
6.8 Confirming That a System Board (PSB) is Assigned to a Physical
Partition (PPAR) 104
6.9 Setting a CP Operational Mode for the Physical Partition 104
6.10 Synchronizing the Physical Partition (PPAR)
Time and XSCF Time
106
6.11 Registering a CP Activation Key 107
6.11.1 CP Activation key application conditions 107
6.11.2 Checking a CP Activation key 107
6.11.3 Registering a CP Activation key 108
6.12 Assigning CP Core Resources to a Physical Partition 110
6.13 Starting and Stopping a Physical Partition (PPAR) 111
Contents v

6.14 Saving Configuration Information 113
6.14.1 Saving logical domain configuration information 113
6.14.2 Saving XSCF setting information 114
Appendix A Trou leshooting 117
A.1 nderstanding the sual Problems and Their Corrective Actions 117
A.2 nderstanding Commands for Troubleshooting 118
A.2.1 Checking the component status 118
A.2.2 Checking the contents of logs 121
A.2.3 Checking information on
a component where a failure or
degradation occurred 121
A.2.4 Checking diagnosis results 122
Appendix B Setup Command Workflow 125
Appendix C Installation Procedure Checklist 131
Fujitsu M10-1/SPARC M10-1 Installation Guide
･
March 2019vi

Preface
This document describes methods of installing and setting up the SPARC M10-1 from
Oracle or Fu itsu. The document assumes that the system has already been unpacked.
Fu itsu M10 is sold as SPARC M10 Systems by Fu itsu in Japan.
Fu itsu M10 and SPARC M10 Systems are identical products.
Audience
This document is designed for system administrators with advanced knowledge of
computer networks and Oracle Solaris, the service engineers who are in charge of
system maintenance, and field engineers.
Related Documentation
All documents for your server are available online at the following locations.
■Sun
Oracle software-related documents (Oracle Solaris, etc.)
http://docs.oracle.com/en/
■Fu itsu
documents
Global site
http://www.fu itsu.com/global/products/computing/servers/unix/sparc/
downloads/manuals/
Japanese site
http://www.fu itsu.com/ p/products/computing/servers/unix/sparc/downloads/
manual/
The following table lists documents related to SPARC M10 Systems.
vii

Documentation Related to the SPARC M10
Manual Names
(*1)
Fujitsu M10/SPARC M10 Systems Product Notes
Fujitsu M10/SPARC M10 Systems Getting Started Guide (*2)
Fujitsu M10/SPARC M10 Systems Quick Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 mportant Legal and Safety nformation (*2)
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Safety and Compliance Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Security Guide
Software
License Conditions for Fujitsu SPARC M12 and Fujitsu M10/SPARC M10
Fujitsu SPARC Servers/SPARC Enterprise/PR MEQUEST Common nstallation Planning Manual
Fujitsu M10-1/SPARC M10-1 nstallation Guide
Fujitsu M10-4/SPARC M10-4 nstallation Guide
Fujitsu M10-4S/SPARC M10-4S nstallation Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain
Configuration Guide
Fujitsu M10-1/SPARC M10-1 Service Manual
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
Crossbar Box for Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Service Manual
PC Expansion Unit for Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Service Manual
Fujitsu M10/SPARC M10 Systems PC Card nstallation Guide
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10
XSCF Reference Manual
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 RC L User Guide (*3)
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF M B and Trap Lists
Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Glossary
External USB-DVD Drive user guide
*1 The listed manuals are sub ect to change without notice.
*2 Printed manuals are
provided with the product.
*3 This document applies specifically to the SPARC M12/M10 and FUJITSU ETERNUS disk storage system.
Notes on Safety
Read the following documents thoroughly before using or handling the SPARC M10
Systems.
■Fujitsu
SPARC M12 and Fujitsu M10/SPARC M10 Important Legal and Safety
Information
Fujitsu M10-1/SPARC M10-1 Installation Guide
･
March 2019viii

Font/Symbol Meaning Example
A
aBbCc123 What
you type, when contrasted with on-screen
computer output.
This font is used to indicate an example of
command input.
XSCF> adduser jsmith
AaBbCc123 The
names of commands, files, and directories;
on-screen computer output.
This font is used to indicate an example of
command output in the frame.
XSCF> showuser -P
User Name:
jsmith
Privileges: useradm
auditadm
talic Indicates the name of a reference manual. See the Fujitsu M10-1/SPARC M10-1
nstallation Guide.
" " Indicates the names of chapters, sections, items,
buttons, or menus.
See "Chapter 2 Network Connection."
■Fujitsu
SPARC M12 and Fujitsu M10/SPARC M10 Safety and Complian e Guide
Text Conventions
This manual uses the following fonts and symbols to express specific types of
information.
Command Syntax in the Text
While the XSCF commands have a section number of (8) or (1), it is omitted from the
text.
For details on the commands, see the Fujitsu SPARC M12 and Fujitsu M10/SPARC
M10 XSCF Referen e Manual.
Syntax of the Command-Line Interface
(CLI)
The command syntax is as follows:
■A
variable that requires the input of a value is in Italics.
■An
optional element is enclosed in [].
■A
group of options for an optional keyword is enclosed in [] and delimited by |.
Preface ix

Document Feedback
If you have any comments or requests regarding this document, please take a
moment to share them with us. Along with the manual code, manual title, and page
number, state your points specifically at one of the following websites:
■Global
site
http://www.fu itsu.com/global/contact/
■Japanese
site
http://www.fu itsu.com/ p/products/computing/servers/unix/sparc/contact/
Fujitsu M10-1/SPARC M10-1 Installation Guide
･
March 2019x

Table 1-1
Workflow for the SPARC M10-1
Step (work time (*1)) Work description Reference
Installation work (approx. 36 minutes (*2))
1 Check the latest information
available in the Fujitsu M10/SPARC
M10 Systems Product Notes.
Fujitsu M10/SPARC M10 Systems
Product Notes
Required
Chapter 1
Understanding the Installation Flow
This chapter describes the required workflows for installation of the SPARC M10-1
and PCI expansion unit, broken up into the following sections.
For the overview, configuration, and specifications of the SPARC M10-1 and PCI
expansion unit, see the Fujitsu M10/SPARC M10 Systems Qui k Guide.
■Workflow
for the SPARC M10-1
■Workflow
for Installing the PCI Expansion Unit
1.1 Workflow for the SPARC M10-1
The SPARC M10-1 is a 1U-size chassis with 1 CPU (8 or 16 cores). This compact
model combines a space-saving design and high performance.
This section describes the workflow from installing the SPARC M10-1 and PCI
expansion unit to making the initial system settings. The PCI expansion unit will be
connected
with optional components to the SPARC M10-1.
The initial system settings are the settings implemented before system startup, and
they include the XSCF setup and CPU Activation setting. Skip the steps for the PCI
expansion unit if it is not to be installed.
By clicking a reference enclosed in " "
to display a section, you can see the details of
the respective step. Italic font is used to indicate the name of a reference manual other
than this manual.
1

Table 1-1
Workflow for the SPARC M10-1 (continued)
Step (work time (*1)) Work description Reference
2 Before installing the system, check
the safety precautions, system
specifications, and necessary
conditions for installation.
"Chapter 2 Planning and Preparing
for System Installation"
Required
3 Prepare the necessary tools/
information for installation.
"3.1 Preparing the Necessary
Tools/Information for Installation"
Required
4 Confirm the delivered components. "3.2.1 Confirming the delivered
components of the SPARC M10-1"
Required
"3.2.2 Confirming the delivered
components of the PCI expansion
unit"
Option
5Install the rack. See the manual for each rack.
"3.3 Confirming the Rack"
Required
6Mount the SPARC M10-1 in the rack. "3.4.1 Mounting the SPARC M10-1
in a rack"
Required
7If there is a PCI expansion unit,
mount it in the rack.
"3.4.2
Mounting the PCI expansion
unit in a rack"
Option
8If there are optional components,
mount them on the SPARC M10-1 or
PCI expansion unit.
"3.5.1 Mounting optional
components in the SPARC M10-1"
Fujitsu M10/SPARC M10 Systems PC
Card nstallation Guide
"Chapter 1 PCI Card Mounting
Rules for the SPARC M10-1"
Optional
(*3)
"3.5.2 Mounting optional
components in the PCI expansion
unit"
Optional
(*3)
9Connect serial cables, LAN cables,
and power cords to the SPARC
M10-1.
"4.1 Connecting Cables to the
SPARC M10-1"
Required
10 If there is a PCI expansion unit,
connect the link cable and
management cable to the PCI
expansion unit.
Attach
the core to the power cord,
and connect the power cord to the
power supply unit.
"4.2 Connecting Cables to the PCI
Expansion Unit"
Optional
(*4)
Initial diagnosis (approx. 30 minutes)
11 Connect the system management
terminal to the SPARC M10-1, and
turn on the input power.
"5.1 Connecting the System
Management Terminal to the Chassis"
"5.2 Turning On the Input Power
and Starting the XSCF"
Required
12 Log in to the XSCF of SPARC M10-1,
and check the firmware version
number, altitude setting, and time
setting.
"5.3 Logging In to the XSCF"
"5.4 Checking the XCP Version"
"5.5 Checking the Altitude Setting"
"5.6 Checking the
Time Setting"
Required
Fujitsu M10-1/SPARC M10-1 Installation Guide
･
March 20192

Table 1-1
Workflow for the SPARC M10-1 (continued)
Step (work time (*1)) Work description Reference
13 Perform an initial diagnosis test on
the physical system board (PSB).
"5.7 Performing a Diagnosis Test" Required
14 Check the status of mounted
components.
"5.8 Checking the Component
Status"
Required
Initial system settings (approx. 50 minutes)
15 Set the password policy. "6.1 Setting the Password Policy" Required
16 Set a user account and password. "6.2 Setting a User
Account and
Password"
Required
17 Configure the telnet or SSH service. "6.3 Configuring the Telnet/SSH
Service"
Required
18 Configure the HTTPS service. "6.4 Configuring the HTTPS
Service"
Required
19 Configure the XSCF network. "6.5 Configuring the XSCF
Network"
Required
20 When duplicating memory,
configure memory mirroring.
"6.6 Configuring Memory
Mirroring"
Option
21 Set the configuration policy for a
physical
partition.
"6.7 Creating a Physical Partition
Configuration List (PCL)"
Optional
(*5)
22 Confirm that the system board (PSB)
is assigned to a physical partition
(PPAR).
"6.8 Confirming That a System
Board (PSB) is Assigned to a
Physical Partition (PPAR)"
Option
23 Set a CPU operational mode for the
physical partition.
"6.9 Setting a CPU
Operational
Mode for the Physical Partition"
Option
24 Clear the difference between the
system time and physical partition
(PPAR) time.
"6.10 Synchronizing the Physical
Partition (PPAR) Time and XSCF
Time"
Required
25 Register a CPU Activation key to the
XSCF.
"6.11 Registering a CPU Activation
Key"
Required
(*6)
26 Assign CPU resources to the
physical
partition.
"6.12 Assigning CPU Core
Resources to a Physical Partition"
Required
27 Confirm the start/stop of the
physical partition and the
connection of the console.
"6.13 Starting and Stopping a
Physical Partition (PPAR)"
Required
Chapter 1 Understanding the Installation Flow 3

Table 1-1
Workflow for the SPARC M10-1 (continued)
Step (work time (*1)) Work description Reference
28 Save XSCF setting information and
logical domain configuration
information.
"6.14 Saving Configuration
Information"
Required
(*7)
*1 Average work time
*2 Time required for mounting optional components and installing the PCI expansion unit is not included
*3 If the optional components are ordered together with the SPARC M10-1, they are shipped mounted to the SPARC M10-1 If the PCI
expansion unit is also ordered, the optional components are shipped mounted to the PCI expansion unit
*4 The link card is shipped mounted to the SPARC M10-1
*5 The physical partition configuration information is already set
*6 One CD-ROM disk containing a CPU Activation certificate is provided with the system The CPU Activation key may be registered
with the system
*7 If you have started Oracle Solaris and changed the configuration of a logical domain, save the logical domain configuration
Note -
The SPARC M10 systems have Oracle Solaris preinstalled. According to the purpose,
either use the preinstalled Oracle Solaris as is or reinstall it.
To reinstall Oracle Solaris, install the latest Oracle VM Server for SPARC. For the latest
information on the supported Oracle Solaris versions and SRU, see the Fujitsu
M10/SPARC
M10 Systems Product Notes.
Table 1-2
SPARC M10-1 link card installation rule
Maximum installable number Link card installation location
2PCI#0
PCI#1
Note -
For details on the link card installation rule, see "Chapter 1 PCI Card Mounting
Rules for the SPARC M10-1" in the Fujitsu M10/SPARC M10 Systems PC Card nstallation
Guide.
1.2 Workflow for Installing the PCI
Expansion Unit
The PCI expansion unit is a 2U chassis with 11 PCI slots, and it can connect to the
SPARC M10-1. Special attention must be paid to the installation location and the
number of link cards that can be installed for the SPARC M10-1 when the PCI
expansion unit is installed in
the SPARC M10-1. Install link cards according to the
Table 1-2 rules.
This section describes the workflow from installing the PCI expansion unit to
checking the component status when the PCI expansion unit is installed while the
Fujitsu M10-1/SPARC M10-1 Installation Guide
･
March 20194

Table 1-3
Workflow when installing the PCI expansion unit
Step (work time (*1)) Work description Reference
Installation work (approx. 38 minutes (*2))
1Check the latest information available
in the Fujitsu M10/SPARC M10 Systems
Product Notes.
Fujitsu M10/SPARC M10 Systems
Product Notes
Required
2 Before installing the system, check the
safety precautions, system specifications,
and necessary conditions for
installation.
"Chapter 2 Planning and Preparing
for System Installation"
Required
3 Prepare the necessary tools/
information for installation.
"3.1 Preparing the Necessary
Tools/Information for Installation"
Required
4 Confirm the delivered components. "3.2.2 Confirming the delivered
components of the PCI expansion
unit"
Required
5 Install the rack. See the manual for each rack.
"3.3
Confirming the Rack"
Required
(*3)
6Mount the PCI expansion unit in the
rack.
"3.4.2 Mounting the PCI expansion
unit in a rack"
Required
7 Install the link card on the SPARC
M10-1.
"8.4 Installing a PCI Express Card"
in the Fujitsu M10-1/SPARC M10-1
Service Manual
Required
8If there are optional components,
mount them on the PCI expansion unit.
"3.5.2 Mounting optional
components in the PCI expansion
unit"
"Chapter 1 PCI Card Mounting
Rules for the SPARC M10-1" in the
Fujitsu M10/SPARC M10 Systems PC
Card nstallation Guide
Optional (*4)
9 Connect the link cable and management
cable to the PCI expansion unit.
Attach the core to the power cord, and
connect the power cord to the power
supply unit.
"4.2 Connecting Cables to the PCI
Expansion Unit"
Required
Initial diagnosis (approx. 45 minutes)
10 Connect the system management
terminal to the SPARC M10-1.
"5.1 Connecting the System
Management Terminal to the Chassis"
Required
11 Turn on the input power. "5.2 Turning On the Input Power
and Starting the XSCF"
Required
12 Log in to the XSCF of SPARC M10-1. "5.3 Logging In to the XSCF" Required
system is stopped.
By clicking a reference enclosed in " " to display a section, you can see the details of
the respective step. Italic font is used to indicate the name of a reference manual other
than this manual.
Chapter 1 Understanding the Installation Flow 5

Table 1-3
Workflow when installing the PCI expansion unit (continued)
Step (work time (*1)) Work description Reference
13 Perform an initial diagnosis test on the
physical system board (PSB).
"5.7 Performing a Diagnosis Test" Required
14 Check the status of mounted
components.
"5.8 Checking the Component
Status"
Required
*1 Average work time
*2 Time required for mounting optional components is not included
*3 This is not necessary to mount the PCI expansion unit in an empty space in the installed rack
*4 If the optional components are also ordered, they are shipped mounted to the PCI expansion unit
Table 1-4
Required work when updating the firmware from XCP 2043 or earlier to XCP
2044 or later
PCI expansion unit
mounted?
Current domain
configuration
Reconfiguring Oracle VM
Server for SPARC config
Setting OpenBoot PROM
environment variables
again
No factory-default
(Control domain
only)
Not required Not required
No There is a logical
domain other than
the control domain
Not required Not required
Yes factory-default
(Control domain
only)
Not required Not required
1.2.1 Points to note on configurations with the PCI
expansion unit connected
In either of the following cases, the logical domain configuration of a physical
partition returns to the factory-default state at the next start time of the control
domain. Also, the OpenBoot PROM environment variables of the control domain
may be initialized.
■In
a configuration with the PCI expansion unit connected, the firmware is updated
from XCP 2043 or earlier to XCP 2044 or later.
■The
PCI expansion unit is installed in or removed from a system with the
firmware XCP 2044 or later.
Save the logical domain configuration information from Oracle Solaris to an XML file
in advance. Also, keep a note of the setting information for the OpenBoot PROM
environment variables of the control
domain in advance to set them again.
Table 1-4 indicates what information may need to be saved/restored when updating
the firmware from XCP 2043 or earlier to XCP 2044 or later in a configuration with
the PCI expansion unit connected.
Fujitsu M10-1/SPARC M10-1 Installation Guide
･
March 20196

Table 1-4
Required work when updating the firmware from XCP 2043 or earlier to XCP
2044 or later (continued)
Yes There is a logical
domain other than
the control domain
Required (XML file) Required
Table 1-5
Required work when installing or uninstalling the PCI expansion unit in the
system with the firmware XCP 2044 or later
PCI expansion unit
mounted?
Current domain
configuration
Reconfiguring Oracle VM
Server for SPARC config
Setting OpenBoot PROM
environment variables
again
No
(Install)
factory-default
(Control domain
only)
Not required Not required
No
(Install)
There is a logical
domain other than
the control domain
Required (XML file) Required (*1)
Yes
(Install/remove)
factory-default
(Control domain
only)
Not required Not required
Yes
(Install/remove)
There is a logical
domain other than
the control domain
Required (XML file) Required (*1)
*1 Not required in XCP 2230 or later
Note -
Execute the ldm list-constraints -x command to save it to an XML file, and execute the
ldm init-system -i command to restore it from an XML file. To display the information of
OpenBoot PROM environment, execute the printenv command at the ok prompt. For a
detailed procedure with these steps,
see "1.7.3 How to Save/Restore the Logical Domain
Configuration Information and the OpenBoot PROM Environment Variable" in the PC
Expansion Unit for Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Service Manual.
Table 1-5 indicates what information may need to be saved/restored when installing
or uninstalling the PCI expansion unit in a system with the firmware XCP 2044 or
later.
Chapter 1 Understanding the Installation Flow 7

Fujitsu M10-1/SPARC M10-1 Installation Guide
･
March 20198

Chapter 2
Planning and Preparing for System
Installation
This chapter describes what should be checked when planning SPARC M10 system
installation. Before installation, you need to understand the system configuration and
obtain all the information that will become prerequisite conditions for installation.
■Safety
Precautions
■Items
requiring confirmation before installation
■Confirming
the Physical Specifications of the System
■Confirming
Rack Specifications
■Checking
Environmental Conditions
■Checking
Acoustic Noise Levels
■Checking
Cooling Conditions
■Checking
the Power Input Type
■Preparing
Power Supply Facilities
■Checking
External Interface Port Specifications
■Checking
the Functions of the Operation Panel
2.1 Safety Precautions
This section describes precautions regarding installation of the SPARC M10 systems.
Be sure to follow the precautions below when performing installation work. Failure
to do so may lead to damage to the device or a malfunction.
■Follow
all the stated precautions, warnings, and instructions for the chassis.
■Do
not insert any foreign ob ect into the chassis openings. Any ob ect that touches
a high-voltage part or causes a component to short circuit may lead to fire or
electric shock.
■Contact
a service engineer for details of chassis inspection.
9

Safety precautions when working with electricity
■Confirm
that the voltage and frequency of your input power match the electrical
rating described on the system name plate label affixed on the server main unit.
■Make
sure to wear a wrist strap when handling the internal disk (SSD/HDD), PCIe
card, memory, motherboard unit, or other printed circuit boards.
■Make
sure to use grounded power outlets.
■Do
not make mechanical or electrical modifications to the chassis. We do not take
responsibility for regulatory compliance of a modified chassis.
■Do
not disconnect a power cord from the chassis while the power is on.
Safety precautions regarding racks
■Racks
must be fixed to the floor, ceiling, or nearest frame.
■The
quakeresistant options kit may be supplied with the racks. The use of the
quakeresistant options kit prevents the rack from toppling over when the chassis
is pulled out from the slide rails for installation or maintenance.
■In
the following cases, a safety evaluation must be performed by a service
engineer before installation or maintenance.
- If the quakeresistant options kit is not supplied and the rack is not fixed with
bolts to the floor, a service engineer confirms the safety of the rack, such as by
verifying
that it does not topple over when the chassis is pulled out from the
slide rails.
- If the rack is mounted on a raised floor, a service engineer confirms that the floor
can withstand the load when the chassis is pulled out from the slide rails. Fix the
rack to
the concrete floor beneath the raised floor by using the original mounting
kit that serves this purpose.
■If
multiple chassis are mounted in the rack, perform maintenance on one chassis at
a time.
Safety precautions regarding installation work
■With
this chassis installed in a closed or multi-unit rack assembly, the ambient
temperature inside the rack operating environment may be greater than the
ambient room temperature. Therefore, consideration must be given to installing
the chassis in an environment compatible with the manufacturer's maximum rated
ambient temperature.
- Consideration of air-conditioning
ad ustments, such as with air circulation, is
needed to prevent the ambient temperature inside the rack from exceeding the
maximum ambient operating temperature of this chassis.
- Maximum ambient operating temperature of this chassis: 35°C
■The
installation of the chassis in a rack should allow for sufficient air flow for the
chassis to operate safely.
- This chassis has ventilation slits at the front and rear of the chassis.
- To prevent overheating, do not cover or close these ventilation slits.
Fujitsu M10-1/SPARC M10-1 Installation Guide
･
March 201910