Furniture of America CM-AC566 User manual

1 / 11
MODEL #
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION # 19-08-09
2 - Persons
Phillips
Screwdriver
(Not Included)
Recommended
CM-AC566

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 11

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / 11

4 / 11

KITCHEN ISLAND
#1 1pc
Left Side Panel Back Panel
#2 1pc #3 1pc
Right Side Panel
5 / 11
#4 2pcs
L/R Partition Panel
Bottom Panel
#5 2pcs #6 1pc
Middle Bottom Panel
#7 1pc
Top Panel Front Frame
#8 1pc
#9 2pcs
Left/Right Shelf
#10 1pc
Middle Shelf Drawer Bottom Panel
#11 3pcs #12 3pcs
Drawer Back Panel
#13 3pcs
Drawer Side Panel(R)
#14 3pcs #15 3pcs
Drawer Front Panel
#16 2pcs
Wing shape panel
CM-AC566
Drawer Side Panel(L)

6 / 11
#A 2pcs
Dowel Ø8*30mm Knob Ø36x28mm
#B 5pcs #C 2pcs
Handle screw
Ø5/32"x36mm
#D 3pcs
Handle screw
Ø5/32"x28mm
Shelf Support
Ø6.5mm
#E 12pcs #F 12pcs
Bolt
Ø1/4"x32mm
# 7
#16
# 2
# 4L
# 4R # 3
# 8
# 9
#10
# 9
# 5
# 6
# 5
#13
#12
#14
#11
#15
#1
#16

ASSEMBLY INSTRUCTIONS
1
2
Part #1 x1pc
Part #3 x1pc
7 / 11
Part #8 x1pc
Part #2 x1pc
# 8
#1
# 3
# 4L
# 4R
#4L
# 3
#1
# 2
Part #4 x2pcs
#4R
Align and attach side panels (#1,3) and partition panels (#4R/L) to the back panel (#2).
Align and attach front frame (#8) to the panels.

ASSEMBLY INSTRUCTIONS
3
4
Part #5 x2pcs
8 / 11
Part #6 x1pc
Part #9 x2pcs
Part #10 x1pc
Hardware #E x12pcs
# 5
# 6
# 5
# 9
#10
# 9
#E
Place bottom panels (#5,6) to the bottom of the product.
Attach shelf pins (#E) to the desired
height of the shelves (#9,10).

ASSEMBLY INSTRUCTIONS
5
6
9 / 11
Part #16 x2pcs
#16
#16
# 2
Part #7 x1pc
Hardware #A x2pcs
# A
# 7
Align and attach wing shape panels (#16)
to the back panel (#2).
Insert dowels (#A) to the wing shape panels (#16), then
align top panel (#7) to the product. Secure by using the
latches.

ASSEMBLY INSTRUCTIONS
7
8
10 / 11
Part #13 x1pc
Part #14 x1pc
Part #15 x1pc
Hardware #F x 4pcs
Part #9 x1pc
Part #12 x1pc
x 3
#13
#14
#15
# 9
#12
#F
x 3
Align and attach drawer side panels (#13,14) to the front panels (#15).
Align and slide drawer bottom panels (#11) through the thin lined gaps of the
drawer, then align drawer back panels (#12) to the drawers. Secure by using
bolts (#F).
11

ASSEMBLY INSTRUCTIONS
9
10
11 / 11
Hardware #B x 3pcs
Hardware #D x 3pcs
Hardware #B x 2pcs
Hardware #C x 2pcs
#D
#B
# C
#B
Attach drawers to product, then secure knobs (#B) to
drawers by using bolts (#D).
Adjust levelers on the bottom of the product according to ground level.
Secure knobs (#B) to the doors by using bolts (#C).